此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
Furthermore, some reasonable advices are given and they should be beneficial to enhance more energy saving in deoxidization period of copper refining anode furnace.
本文从工艺角度出发分析了阳极炉炉龄的影响因素，指出了提高炉龄的具体措施。
This article analyzes the elements affecting anode furnace campaign and put forward detailed measures for campaign increasing.
此外，给出了一些合理化建议，有利于铜精炼阳极炉还原期节能效果进一步提高。
The results showed that reducing trend of LPG flux about deoxidation period of rotary anode furnace in copper refining was quite obvious its saving energy was remarkable with the increase of temper…
阐述了影响铜阳极炉开动周期的诸多因素，并提出了延长阳极炉开动周期的办法。
The effecting factors on the working period of copper anode furnace are discussed in detail, and the methods prolonging the working period of copper anode furnace are put forward.
前言：本文叙述了贵溪冶炼厂新阳极炉驱动装置气动系统存在的缺陷及改进措施。
This essay describes the defects of pneumatic system of new anode furnace driving unit used in Guixi Smelter and how to solve these defects.
回转式阳极炉采用新型煤基炭制还原剂，对精炼渣物化性能的要求不同于固定式阳极炉。
The rotary anode furnace using a novel carbonaceous reductant is different from the fixed anode one in their requirements for the physicochemical properties of the refining slag.
介绍了MC - 3彩色屋面防腐防水涂料在贵溪冶炼厂阳极炉工程屋面上的应用及具体施工工艺。
The application and construction technology of MC-3 colour roof coating of anticorrosion and waterproof on the roof cathode furnace project in the Guixi Smeltery are introduced.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉重油流量数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期重油流量数学模型进行计算。
A mathematical model of heavy oil flux about rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型，并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理，建立了基于燃烧风预热下铜精炼阳极炉高温烟气热损失数学模型，并根据不同预热燃烧风温度对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
绿阳极被传送到地下焙烧炉内，包含一连串的带凹陷的耐火砖砌筑成空的，围绕相互连接的烟洞墙。
The green anodes are delivered to in-ground baking furnaces, which consist of a series of refractory brick lined pits with hollow, surrounding interconnected flue walls.
主要介绍了DC炉底阳极的最新材料——导电镁碳砖。
A new material electric conducting magnesia carbon brick used for DC furnace bottom anode is briefly described.
对以重油作为燃料的阳极焙烧炉的火道结构进行了优化模拟计算。
This paper performs simulation on the optimized structure of a heavy oil burning anode baking furnace.
同时，介绍了一些提高阳极焙烧炉技术水平，降低阳极焙烧炉能耗的方法。
Meanwhile, methods to improve technological level and energy conservation of anode baking furnace have also been proposed.
模拟实际工业生产中采用的敞开环式阳极焙烧炉炉室结构，设计了一台小型、简易的实验用阳极焙烧炉。
A small, simple experimental anode baking furnace is designed by simulating the structure of open ring-type horizontal baking furnace used in industrial production.
指出结构设计是阳极焙烧炉节能降耗的关键。
The paper indicates that the structure design is the key to energy save of anode baking furnace.
建立了敞开式阳极焙烧炉热工过程的数学模型，该模型用于预测焙烧炉的热力行为是满意的。
A mathematical model of the horizontal anode baking process has been developed. The predicted results obtained are consistent and in good agreement with experimental results reported elsewhere.
对新型阳极焙烧炉的优化设计进行了详细和全面的分析，具有良好的推广应用价值。
Optimum design of a new type anode baking furnace is introduced and analyzed in detail, the new type anode baking furnace will be widely used in the future.
介绍了一种新型阳极焙烧炉。
介绍了利用新型立装敞开式阳极焙烧炉焙烧阴极炭块的相关技术。
This article primarily introduced correlative technology that made use of new-stand-loaded-open type anode baking furnace to bake cathode block.
该装置包括用于冷却微波炉中磁控管阳极的油冷系统。
The device comprises an oil cooling system used for cooling anodes of magnetrons in the microwave oven.
敞开式焙烧炉的烟气，在阳极焙烧的设计和生产中。是必须引起重视的要素。
Fume from open type anode baking furnace must be the factor we pay special attention to in the design and production of anode baking.
我国大型铝厂的阳极焙烧炉一般采用敞开式焙烧炉，基本上仍处于日轻焙烧炉的技术水平上。
Currently anode baking furnace in big Aluminum factories of our country are generally open baking furnace, being on the technology of exposure baking furnace.
通过对环式阳极焙烧炉的热工过程进行系统理论分析，建立了焙烧炉热工过程的数学模型。
Through the systematic analysis of ring anode baking process, a mathematical model was developed. Several simulation runs were then made.
通过对环式阳极焙烧炉的热工过程进行系统理论分析，建立了焙烧炉热工过程的数学模型。
Through the systematic analysis of ring anode baking process, a mathematical model was developed. Several simulation runs were then made.
应用推荐