门阵列和标准单元是两种主要方法。
门阵列在设计上较简单，但不能完成高性能的操作。
A gate array is simpler to design but does not allow a high performance implementation.
作为例子，针对带宏单元的门阵列给出了相应的算法。
As an example, a clustering algorithm is given for gate arrays with macrocells to obtain multi-objective optimization.
该方法非常适于采用现场可编程门阵列(FPGA)器件的实现。
The method was very suitable for hardware implementation based on FPGA (field programmable gate array).
探讨现场可编程门阵列（FPGA）器件编程数据的装载模式及过程。
The loading mode and process of programmable data of FPGA device are discussed.
本文着重研究用现场可编程门阵列(FPGA)来开发设计精插补芯片。
In this dissertation, Field Programmable Gate Arrays (FPGA) chip is studied to develop and design the fine interpolation chip.
介绍一种基于现场可编程门阵列(FPGA)的多通道电子数片机设计方案。
A design project based on Field Programmable Gate Array (FPGA) for multi-channel electronic tablet counter is introduced.
基于现场可编程门阵列的定制的光纤通道适配器，提出了其设计思路和系统结构。
The design idea and system architecture of costumed fiber channel adapter was proposed based on field programmable gate array.
本文研究并提出了优化程度较高的退火模拟门阵列总体布线及平行通道区布线算法。
The algorithms with a high degree of optimization of the global routing for gate array and the channel routing are studied and proposed.
利用现场可编程门阵列器件FPGA实现了结构光激光线图像条纹中心线的实时提取。
The use of field of programmable gate array (FPGA) makes the detection of Central Line of structured laser light stripe image implementation in real -time.
本文提出了一种采用现场可编程门阵列器件（FPGA）实现PWM控制电路的方案。
The paper introduces a design of PWM control circuit based on FPGA.
以现场可编程门阵列（FPGA）作为触发脉冲生成器，精确性高，并具有相序自适应性。
The digital trigger to silicon controlled rectifier based on field programmable gate array (FPGA) has high accuracy and the ability of phase self-adjusting.
提出了一种基于FPGA(现场可编程门阵列)和软核cpu的嵌入式系统设计的新方法。
This paper proposes a new method for embedded system designing, based on FPGA and soft-core CPU.
介绍一种基于现场可编程门阵列（FPGA）的时数转换器（TDC）的原理及设计方法。
The principle and design method of a new design of a time-to-digital converter (TDC) implemented on an FPGA is presented.
通过利用现场可编程门阵列fpga设计微控制器的接口电路，使得电路的设计变得简单灵活。
The design of interface circuits of micro controller becomes simple and flexible due to using FPGA.
基于现场可编程门阵列（FPGA）的定制的光纤通道适配器，提出了其设计思路和系统结构。
The design idea and system architecture of costumed fiber channel adapter was proposed based on field programmable gate array(FPGA).
利用现场可编程门阵列(FPGA)的高速、高密度、可在线修改的特点，设计一智能接口模块。
Using the rapidness, high degree of accuracy and emendable on line of FPGA, an intelligent interface module was designed.
现场可编程门阵列芯片通常支持两个或更多个电源电压，以允许用户在所支持的电源电压之间切换。
Field programmable gate array chips typically support two or more power supply voltages, allowing the user to switch between the supported power supply voltages.
例如，存储器电路515可在现场可编程门阵列中存储配置位，其中一个配置位用于生成选择信号。
For example, memory circuit 515 can store configuration bits in a field programmable gate array, where one of the configuration bits is used to generate the select signal.
采用现场可编程门阵列（FPGA）基于小数分频器的原理，实现直接数字式频率合成器（DDS）。
The realization of direct digital synthesizer (DDS) by FPGA based on the principle of fraction division is introduced.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
提出了分数倍抽样率转换器的高效时变网络结构的设计方法，并用现场可编程门阵列(FPGA)实现。
The design method for the efficient time-varying network architecture of the fractional multiple sampling rate converter is presented and its field programmable gate array (FPGA) is implemented.
介绍了MP3播放器的工作原理，并介绍了基于现场可编程门阵列（FPGA）器件的设计思想和实现。
This paper introduces the work principle of MP3 players, and introduces the design thoughts and realization based on FPGA.
提出一种基于现场可编辑门阵列的MPEG - 2TS码流实时分析与检测系统解决方案并予以实现。
The paper presented and realized a scheme which could be used for analyzing and detecting the MPEG-2 TS with field programmable gate array (FPGA).
根据客户的需求，BAE系统公司将生产并销售抗辐射的现场可编程门阵列（FPGA）半导体用于空间应用。
MANASSAS, Va., 17 July 2007. BAE Systems will produce and sell radiation-hardened field-programmable gate array (FPGA) semiconductors for space use, responding to a customer need for the devices.
提出了一种可以进行列主元选取的细粒度lu分解流水线算法并在现场编程门阵列(FPGA)上得到了实现。
This paper presents a fine-grained pipeline algorithm for lu decomposition with column partial pivoting and gives the description of its implementation on field-programmable gate arrays (FPGA).
利用现场可编程门阵列（FP GA）在光互连网络中实现了数据包的硬件路由以及数字交叉开关的动态配置。
With field programmable gate array(FPGA), hardware routing of data packages and dynamic configuration of digital crosspoint switch are realized.
重点研究载波同步方法，设计电路及参数，仿真同步性能，并在现场可编程门阵列(FPGA)上实现同步电路。
We focus on the carrier synchronization method, the circuit and its parameters design, the performance simulation and the circuit implementation in Field Programmable Gate Array (FPGA).
介绍了利用现场可编程门阵列fpga实现低电压差分信号—光纤接口的协议透明、远距离、高速数据传输系统。
Based on field programmable gates array (FPGA), a method of implementing a long-range agreement transparent, highspeed LVDS and optical communication was firstly introduced.
介绍了利用现场可编程门阵列fpga实现低电压差分信号—光纤接口的协议透明、远距离、高速数据传输系统。
Based on field programmable gates array (FPGA), a method of implementing a long-range agreement transparent, highspeed LVDS and optical communication was firstly introduced.
应用推荐