C1023是一种作导向器材料的镍基铸造合金。
采用激光熔覆技术在45钢表面获得镍基合金涂层。
The Ni based coating on 45 steel has been obtained by laser cladding technology.
研究了镍基单晶高温合金压缩蠕变强度的各向异性。
The anisotropy of compression creep strength in a nickel-base single crystal superalloy was investigated.
研究耐高温镍基合金各向异性阻尼特性的建模与识别。
The modeling and identification of anisotropic damping property of Ni based single crystal alloys are presented.
研究了添加金刚石对镍基合金的强化与磨损性能的影响。
The effects of addition of diamond on reinforcement and wear resistance of nickel base alloy was studied.
本文研究了一种定向凝固镍基高温合金的高温低周疲劳行为。
Low cycle fatigue (LCF) tests of a directionally solidified nickel base superalloy were conducted at elevated temperatures.
镍基催化剂上积碳是甲烷干气重整反应急需解决的关键问题。
Carbon deposition on nickel catalysts is a fatal problem for carbon dioxide reforming with methane.
本文研究了影响镍基钎料钎焊不锈钢接头性能的主要工艺参数。
Main technology parameters of effects on brazing stainless steel joints using nickel base filler metal have been studied.
本文重点研究镍基变形高温合金中弯曲晶界形成的动力学过程。
Kinetic Process of zigzag grain boundary formation (ZGBF) in wrought nickel-base superalloys has been investigated.
这种技术使用了与先前不同的方法和技术，能用于锂基和镍基电池。
The good news is that it uses a completely different approach and technology than the previous effort, and can work with both lithium- and nickel-based batteries.
镍基涂层性能的研究表明，镍基粉芯线材具有良好的加工工艺性能；
The research on properties of nickel-base coatings indicates that nickel-base cored wires have good manufacture process.
镍基过渡合金既起到弥散强化作用，又能提高其韧性，减少裂纹产生。
The Ni-based transition alloy had a function of dispersion strengthening, and ahvanced the toughness, reduced the trend of cracking.
介绍了贵金属催化剂与镍基催化剂在重整活性和抗积炭能力方面的差异。
Differences in catalytic activity and ability to resist coking between noble metal based catalyst and Ni based catalyst are described.
研究结果表明，镍基钎焊层通过扩散形成界面，实现了完全的冶金结合。
The results show that the interface between nickel solder and steel is metallurgical joint by diffusion.
本文的研究结果对准确评定镍基单晶涡轮叶片的剩余寿命具有参考作用。
The results of the paper can be used to precisely evaluate the remainder life of Nickel-based single crystal turbine blade.
采用等离子旋转电极工艺（PREP）制取镍基高温合金FGH95粉末。
The FGH95 powder was produced with the plasma rotating electrode process (PREP).
常温常压下，纳米级的镍基催化剂对苯乙烯和二苯甲酮分别有催化加氢活性。
Nanosized nickel based catalysts can be used to carry out the hydrogenation of styrol and benzophenone at normal temperature and pressure.
裂纹控制技术是镍基合金激光快速成形技术广泛应用和进一步工业化的关键。
Cracking control technology is one of the bottlenecks retarding the wide application and further industrialization of laser rapid forming nickel based alloys.
试验研究了不同含量的两种碳化钨粉末对镍基自熔合金喷熔层耐磨性的影响。
Effect of type and content of WC on the wear resistance of Ni base spray melt layers were studied.
本文阐述了用过渡液相扩散连接方法焊接K3镍基铸造高温合金的基本工艺。
The essential technology to we'd K3 nickel-based super alloy using transition liquid diffusion bonding is described.
研究了镍基合金冷变形管坯退火裂纹与加热温度的关系和退火裂纹产生的原因。
The relationship between annealing cracks and heating temperatures of Ni-based alloy cold-formed billets and the causes of annealing crack occurrence are studied.
采用含有机物的镍基高温合金原粉，用粉末烧结法制备了球形多孔高温合金材料。
The porous superalloy material with hollow spherical pores was fabricated by means of metal powder sintering using nickel-base superalloy powders.
本文研究高温固溶处理对一种定向凝固高强度镍基高温合金的组织和性能的影响。
The effect of high temperature solution treatment on the structure and properties of a directionally solidified high strength nickel-base superalloy has been investigated.
利用电沉积技术，在A3钢片上制备了含有微米级空心微珠粒子的镍基复合镀层。
The Nickel micron hollow tiny pearl composite coating on A3 steel substrate was prepared by electrodeposition technique.
无钴镍基高温合金GH 543即是从理论分析的最终的12种成分中选择出来的。
GH543 cobalt-free nickel base superalloy is finally selected from the final 12 compositions extracted through theoretical analysis.
本文利用浸渍法制备了一系列不同载体的镍基催化剂，并将其用于苯的羟基化反应。
A series of Ni-based catalysts with different supports were prepared by impregnation method and tested in the hydroxylation of benzene to phenol.
镍基电磁屏蔽涂料作为一种高效、低廉、应用方便的技术手段必将具有广泛的应用前景。
It will have widespread foreground as a kind technical method with high effect and cheap and convenience.
采用镍基合金粉，研究了激光多层涂覆过程中基材晶体取向对涂层凝固组织的影响规律。
The influence of the crystal orientation of the substrate on microstructure is investigated by multi layer laser cladding with the powder of nickel base superalloy.
在此基础上，结合试验结果，对镍基单晶合金在高温环境下的开动滑移系类型进行确定。
On this base, the open slip system of nickel base single crystal alloy at high temperature condition has been determined from test data.
在此基础上，结合试验结果，对镍基单晶合金在高温环境下的开动滑移系类型进行确定。
On this base, the open slip system of nickel base single crystal alloy at high temperature condition has been determined from test data.
应用推荐