本项技术已在生产实际中应用多年,完全取代了旧的热锻工艺,工艺稳定,设备可靠。
This technology has been applied in actual production for many years, replacing completely the old hot-forged technology, which is stable with reliable equipment.
模拟试验及工程实用证明,该方法可行、准确、实用,对于指导辊锻工艺与工装设计具有重要意义。
Proved by simulated test and engineering practice, this method is feasible, accurate and useful and has great significance to direct roll forging technology and tool design.
将这些定量对应关系应用于工程设计,能有效地解决开式模锻工艺与模具设计中的主要参数优化问题。
If these are applied to engineering design, they will solve the problem of how to optimize these main parameters.
分析了汽车驱动齿轮的冷模锻工艺。
The cold forging process of the driving gear for automobiles was analyzed.
分析了汽车行星齿轮的冷模锻工艺。
This paper analysed the cold die forging technology of automotive epicyclic gears.
叙述了磁极新旧模锻工艺过程。
The technological process of the new and old die forging for the pole was described.
叙述了差动伞齿轮新旧模锻工艺过程。
The technological process of the new and old die forging for the differential bevel gear was described.
提出了采用模锻工艺成形铁路货车支撑座的方法。
The method to form supporting pedestal of railroad lorry by die forging was proposed.
结果表明,闭式精锻工艺的新方法是十分有效的。
The results shown that the new way of precision die forging is very efficient.
介绍了重卡前轴预成形辊锻工艺试验与结果分析。
The process experiment and result analysis of preceding roll forging for heavy truck front axle introduced in this paper.
提高焊缝性能应当从温度场分布和顶锻工艺着手。
The performance of the weld would be improved with the regulation of the temperature field distribution and the upsetting parameters.
结果表明,闭式挤锻工艺的新方法是十分有效的。
The results shown that the new way of closed extrusion-die forging technology is very efficient.
本锤适用于锻工车间对各种形状零件的自由锻造。
The hammer is applied in different kinds of free forging in the forging shop.
结果表明,闭式精密模锻工艺的新方法是十分有效的。
The results have shown that the new way of precision die forging is very efficient.
简要介绍了中高速柴油机曲轴锻件的RR弯曲镦锻工艺。
This article has described the RR bending and upsetting process for crankshaft forging of the medium and high speed diesel engine.
分析了模具的结构特点;确定了合理的液态模锻工艺参数。
Structural features of die are analyzed and reasonable technological parameters for liquid forging are determined.
介绍了长轴类锻件热锻工艺及模具的计算机辅助设计系统。
This paper introduced a CAD system of the technology and dies for hot forging of long forge pieces.
整体上讲冷锻工艺流程的设计还十分依赖于经验主义的规则。
Cold forging process design is still highly based on empirical rules and experience.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
根据S形凸轮结构特点,设计了其锻件毛坯的平锻工步及其模具。
According to its characteristics horizontal forging technology of S-shape CAM and die have been designed.
而且,对于闭式模锻工艺而言,坯料尺寸直接影响模锻工艺的顺利进行。
And as for the closed die forging, billet size will affect the process directly.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
叙述了羊角锤新旧模锻工艺过程,介绍了活动模具的动作原理及模具结构。
Described the technological process of the new and the old forging die for the claw hammer, introduced the working principle of the movable die and die structure.
介绍安装盘几种加工方法的优缺点,通过比较说明液态模锻工艺的可行性。
This article explains the advantages and disadvantages of some possible methods for processing flanges. By comparing these methods, it shows that liquid forging process is feasible.
模拟与实验结果表明,闭式温精锻工艺与模具设计合理,数值模拟分析准确。
In contrasting the results of simulation and experiments, it is clear that both the fine warm forging process and the die design are feasible, and the numerical simulation model is also correct.
分析了粉末烧结材料镦粗和复压工艺的致密效果,提出了闭式模锻工艺设计原则。
The densification effects of upsetting and repressing are compared, and a technology design principle for closed die forging is suggested .
按照镦锻工艺的要求,提出了改进的加热制度,为实际生产应用提供了依据和参考。
The improved induction heating schedule was put forward according to demands of upsetting process. It provides basis and references for practical production.
介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求,并进行工艺试制和应用。
The Titanium alloy swashplate's pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
在分析了RR弯曲镦锻工装结构特点的基础上提出RR弯曲镦锻工装模式化设计方案。
Based on the analysis of the structure characteristics for the RR bending and upsetting tool setup, the modularization design scheme of the RR bending and upsetting tool setup has been set forth.
通过镦粗工艺试验,确定了该材料的热变形工艺参数,并对其进行了等温模锻工艺研究。
The technological parameter of heat deformation was confirmed by the test of Upsetting technology, and the isothermal stamping was studied.
应用推荐