高锰钢是一种典型的难加工材料,因其优良的耐磨性和低廉的价格,被广泛用于制作受冲击较大的零部件。
As a kind of typical hard machining materials, owing to its abrasion resistance and low cost, high manganese steel is widely used for those components that bear great impacts.
研究了高锰钢合金化对组织的影响。
The effect of alloying high manganese steel on microstructure has been studied.
并重点分析了铸态锰钢的抗磨机理。
The mechanism of wear resistance of the as-cast manganese steel was mainly analyzed.
介绍高锰钢斗齿焊接的一种新方法。
A new method of welding high Mn steel bucket teeth was introduced.
对微合金化高锰钢衬板断裂原因进行了分析。
The fracture reasons of lining plate of microalloying high Mn steel have been analyzed.
可以堆焊在锰钢上。
现场应用表明:其使用寿命是高锰钢的两倍以上。
Also practical application indicates that it can survive two times longer than the high manganese steel.
用于露天煤矿大型托轮的高锰钢属于难加工材料。
Austenitic manganese steel, which serves as large riding wheel at open-cut coal mine, belongs to hardworking material.
研究了变质和弥散处理对高锰钢组织和性能的影响。
The effect of modifying and dispersion treatment on the structure and properties of high Mn steel is studied in this paper.
高锰钢堆焊,适用于破碎机等受冲击磨损部位的堆焊。
Used for surfacing welding high-Mn steel, including various part of heavy impact abrasion resistance.
其成分特征是碳含量在共析点左右的高碳低锰钢轨钢。
The main characteristics of the rail steel are low manganese and high carbon which content is being closed to eutectoid.
碳钢钢轨与高锰钢辙叉的焊接难度很大,仍属国际性难题。
It is very difficult to welding a high carbon steel rail and a high manganese steel frog, which is still a worldwide puzzle.
对断裂的高锰钢履带板进行了化学成分、断口和金相分析。
The fractured caterpillar board of high manganese cast steel was analyzed for chemical composition, fracture and microstructure.
经过分析,确定了组织和力学性能最佳的一种改性高锰钢。
From the subsequent analysis, one kind of modified Hadifield-steel with good microstructure and optimal mechanical property was obtained.
主要研究了深冷处理对超高锰钢组织、性能及耐磨性的影响。
The influences of cryogenic treatments on the microstructure, material performances and the impact wear resistance of the superhigh manganese steel are studied.
锅炉,过热器,热交换器和冷凝器用熔焊碳和碳锰钢管规范。
Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, heat Exchanger and Condenser Applications.
钻头采用锰钢制造,经过特殊加工处理,适用于各种地质环境。
Bit using manganese steel manufacturing, through special processing, are suitable for all kinds of geological environment.
对高锰钢微合金化提高耐磨性的机理及有关工艺作了详细介绍。
The mechanism that increases the wearability for microalloying of high manganese steels and the concerned processes is introduced in this paper.
通过冲击试验,研究了水韧处理质量对高锰钢低温韧性的影响。
The effects of water toughening quality on the toughness at low temperature of high-manganese steel was studied using impact -tests.
在伴有冲击的热强碱腐蚀磨损工况,高锰钢有过早失效的危险。
Under hot concentrated caustic impact-corrosion-abrasion conditions high Mn steel may be failure in earlier time.
论述了高锰钢的低温脆性,建立了用液氮冷冻工件的低温切削方法。
The brittleness of high-manganese steel under low temperature is discussed. A method of Iow-temperature cutting with liquid nitrogen freezing of the workpiece has been developed.
结果表明:铸造复合中锰奥氏体钢的耐磨性是高锰钢的5.41倍。
The results show that the wear resistance of casting composite medium manganese steel is 5.41 times that of Hadfield steel.
只要材料成型及控制工艺得当,用该成分的高锰钢生产衬板是可行的。
It is feasible that use this high Mn steel to produce lining plate so long as the forming and controling processes of materials are suitable.
采用元胞自动机与有限元相耦合的方法模拟厚断面高锰钢铸件凝固组织。
Solidification microstructures in heavy section high manganese steel casting were simulated using coupling cellular automaton(CA)and finite element method(FEM).
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
利用传统的喷丸技术对高锰钢表面喷丸处理,研究材料表层的组织结构特征。
The high manganese steel was processed by the conventional shot peening technology, and the surface microstructure was characterized.
综述了抗磨钢包括奥氏体锰钢、低合金马氏体钢和贝氏体钢的最新研究进展。
The recent advances of research of wear resistant steel including austenitic manganese steel, low alloy martensitic steel and bainitic steel are summarized in this paper.
工业实验表明,复合变质处理高铬铸铁锤头的耐磨性约是高锰钢锤头的4倍。
It was found by industrial experiments that the wear resistance of the crusher hammers is about 4 times higher than that of the high manganese steel crusher hammers.
本文是对铬钨锰钢进行碳化物细化处理和不均匀奥氏体淬火的试验研究结果。
This is the result on studying carbide refining treatment and non-uniform austenite quenching.
应用推荐