重点分析了错流过滤应用中的问题。
The existent questions in the crossflow filtration are analyzed as an emphasized portion.
介绍了错流移动床活性焦烟气脱硫试验结果。
The test results of flue gas desulphurization by active coke in a cross flow moving reactor are introduced.
多级逆流或错流萃取的萃取率明显高于单级萃取。
Both the extraction ratios of countercurrent multi-stage extraction and cross current multi-stage extraction were higher than single-stage extraction.
采用两级错流提取即可使茶多酚提取率达到90%以上。
By means of two-step cross current extraction method, the extraction rate of TP can be more than 90%.
实验研究微小交错流道散热块的传热性能以及热阻系数。
Experimental investigation was conducted to study the thermal performance and thermal resistance factor of staggered mini-duct heat sinks.
笔者利用空气水系统对错流旋转填料床的气相压降进行实验研究。
In this paper, the gas pressure drop of a cross-flow rotating packed bed is studied based on air-water system.
一个用“数字转移单位”技术的方法被用来模拟新式九阶错流柱。
A methodology is developed for modeling the novel nine-stage cross-flow cascade packed column by using the " number of transfer unit" technique.
试验选用PE管式膜作为过滤元件，采用旋流强化错流过滤方式。
In the experiment, PE tubular membrane is used as filtering component and cyclone enhanced cross filtration is selected.
探索了不同体系、孔径、浓度、压力以及错流速度对过滤效果的影响。
The effects of the system, pore size, solid content, pressure difference and cross flow velocity on the filtration are investigated.
采用因次分析的方法推导出错流旋转填料床气相压降的无因次关联式。
The correlative formulas for pressure drop of cross-flow rotating packed bed was deduced with the method of dimensional analysis.
多孔波纹板错流旋转床填料具有传质效率高、压降低、动平衡性好等优点。
Therefore, cross-flow rotating bed with protruded ripple plate packing have many merits of higher mass transfer efficiency, lower pressure drop and better kinetic balance.
一种用于石油污水处理、用以替代现有沉降处理设备的含油污水错流式筛滤机。
The utility model relates to a cross-flow sieve filter for sewage containing oil, which is used for treating petroleum sewage and substituting the existing settling and treating device.
采用外压管式聚砜-聚丙烯腈共混超滤膜进行错流膜生物反应器水力清洗特性研究。
The external pressure tubular moduel and PS PAN blended membranes were used in the study on the characteristics of hydraulic cleaning in crossflow membrane bioreactor.
研究了错流方式的板式膜组件的切向流速、时间、压力、温度等对渗透通量的影响。
The effects on flux of tangential flow rate, time, pressure and temperature were investigated.
对固定床中流体与换热管呈错流流动的传热进行了实验研究，并以二维传热模型进行模拟。
An experimental study was conducted on the cross-flow heat transfer in a fixed-bed, and simulated by a two-dimensional model.
冷模实验表明：多级错流短接触汽提方法能将汽提介质与催化剂的接触时间控制在两级挡板之内。
The cold model experimental results indicated that the MCSS degassing tower keeps the contact between catalyst and steam within two stages.
利用错流流动模型及膜渗透的溶解-扩散机理，对螺旋卷式膜组件中天然气的分离过程进行了模拟计算。
The simulation is developed by using cross flow mathematical model and solution-diffusion model for natural gas separation process in spiral-wound membrane modul.
利用错流式水平生物滴滤塔对H2S进行脱臭实验，采用城市生活污水处理厂曝气池污泥进行接种挂膜。
A horizontal biotrickling filter is applied in the treatment of H2S. Using waste water treatment plant's sludge to seed.
通过试验，确定了针对城市污水直接膜过滤应选择的合适错流速度、料液温度以及采用低压恒通量操作的模式。
This article presents an experimental determination for optimal operational parameters, such as cross velocity, trans-membrane pressure, temperature and fixed flux operation, etc.
以GAMBIT软件为工具，建立符合错流涡旋式高效固液分离装置实际流场机构的几何模型与网格划分策略。
The geometric model of Cross Flow Swirl Solid-Liquid Separate equipment with High Efficiency and mesh generation strategies were built with GAMBIT software.
这样让您能在侦错指令码中掷回例外状况，以协助进行侦错流程，而且也可以将发行程序码最小化，以突显效能。
This enables you to throw exceptions in debug scripts that are helpful to the debugging process, while minimizing the size of release code to emphasize performance.
通过对错流过滤系统中悬浮颗粒的受力分析，建立动态膜涂膜过程数学模型，可计算整个过程中的膜通量和膜厚度。
A simple model of dynamic membrane forming in crossflow filtration is presented which can predict filtrate flux and dynamic membrane thickness through the analysis of force on the particles.
为预测其影响规律，文内针对含有错流塔板且气相预混合的精馏塔，提出了气液返混发生时计算精馏效率的混合池模型。
In order to calculate distillation efficiencies with the entrainment of both vapor and liquid, a mixing cell model was developed.
考察了分级过程中颗粒所受的力场和介质流体的流动场，分析和比较了与之对应的两种不同形式的分级，即颗粒物料的逆流分级和错流分级。
By investigating the direction of force acted upon particles and the direction of fluid flow in the classifier, the concepts of cross flow classification and reverse flow classification were proposed.
考察了分级过程中颗粒所受的力场和介质流体的流动场，分析和比较了与之对应的两种不同形式的分级，即颗粒物料的逆流分级和错流分级。
By investigating the direction of force acted upon particles and the direction of fluid flow in the classifier, the concepts of cross flow classification and reverse flow classification were proposed.
应用推荐