最终研制出一种新型铸造铝合金。
介绍了铸造铝合金的电子束改性技术。
Finally, electron beam modification technology of cast aluminum alloy is introduced.
分析了金属型铸造铝合金摩托车减震筒铸造缺陷的产生原因。
Origination of casting defects in aluminum alloy motorcycle damping cylinder in metal mould casting was analyzed.
综述了铸造铝合金熔体洁净度-疏松-力学性能三者之间的关系。
Melt Purityporositymechanical properties relationships in casting aluminum alloys have been reviewed in this paper.
结果表明，挤压铸造铝合金车轮力学性能明显高于低压铸造车轮。
The results show that the mechanical properties of the aluminum alloy wheel produced by squeezing casting are superior obviously to those of low pressure casting ones.
结合生产实际情况，设计出工业上实用的低频电磁铸造铝合金结晶器。
The industrial practical crystallizer for al alloy in low-frequent electromagnetic casting was designed based on the above mentioned idea.
同时还介绍了铸造铝合金-金属陶瓷复合材料的试验情况及发展前景。
Meanwhile the paper also presents the experimental information and developing prospects of the cast aluminium alloy-ceramic metal compound material.
利用数值模拟技术，对低压铸造铝合金车轮的流动、充型过程进行了分析。
Numerical simulation technology has been carried out to analyze the filling process of an aluminum alloy wheel produced by low pressure die casting.
表面敷层方面介绍了铸造铝合金的等离子喷涂、电化学方法的研究现状；
Then, for surface cladding layer, advances in the plasma and electro-chemistry methods are reviewed.
本实用新型不但能铸造铝合金活塞，还能铸造气缸、轴承壳或类似薄壁件。
The utility model not only can cast aluminum alloy pistons, but also can cast air cylinders, bearing housings or similar thin-wall parts.
对铸造铝合金a356.0晶间腐蚀性能进行研究，分析了产生腐蚀的组织原因。
The Intergranular corrosion properties of cast aluminum alloy A356.0 are studied. The organizational reasons of corrosion are analysed.
分析了电磁铸造铝合金铸坯的表面和内部质量，并与普通连续铸造铸坯进行了对比。
The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.
利用电子束技术对添加不同合金化元素的铸造铝合金试样表面进行电子束改性试验研究。
Electron beam modification process were used on the surfaces of cast aluminum alloy samples with various alloying elements.
利用X射线无损检测方法，对铸造铝合金制造的某发动机汽缸体的残余应力分布进行了全面分析。
Residual stress distribution for engine cylinder body made of casting aluminum alloy was investigated completely using X-Ray nondestructive detection method.
在结晶器外套材料的不同情况下，对低频电磁铸造铝合金过程的电磁场进行了三维有限元数值模拟。
A 3d FEM numerical simulation of electromagnetic field in the crystallizer with different outer sleeves materials for al melt in low-frequent electromagnetic casting were conducted.
通过水力学模拟试验对铸造铝合金过滤流动过程进行了分析，建立了过滤效率的水力学模拟试验关系式。
The analysis of filtering flow process of aluminum cast alloy based on hydraulic simulation was carried out. The filtering efficiency formula was established.
本文介绍研制的新型铸造铝合金zl305a是一种强度高，时效稳定性好，耐蚀性优良的船用新材料。
Casting aluminium alloy ZL305A is a new shipbuilding material with high strength, good ageing stability, excellent corrosion resistance.
ZL 108合金是目前国内发动机活塞材料使用的一种主要铸造铝合金牌号，我国现行标准中zl108并不含钛。
Alloy ZL108 is a main brand of cast aluminum alloy used for power engine piston material, it is not needed to contain titanium according to the national standard now.
可以用于铸造的材料类型有：铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
利用所制备的预制块，研究了多孔铝合金的加压铸造工艺。
With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
研究了铝合金消失模铸造过程中的涂料行为。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
介绍激光技术在铝合金铸造过程中液位自动控制方面的应用，以及对提高扁锭质量的作用。
The paper describes the application of laser technology for aluminium alloy casting metal level automatic control and the effect in quantity of slab.
在不同的压缩空气相对湿度下，试验测定了低压铸造过程中液态铝合金氢含量的变化。
Changes in hydrogen content in liquid aluminum were measured under different relative humidity of compressed air in low pressure die casting.
本发明适用于铝及铝合金铸造行业。
The invention is usable for aluminium and aluminium alloy casting industry.
呋喃树脂砂用于铝合金铸造时，特别是对于一些大型、薄壁铝合金铸件，型芯的溃散性较差。
Furan resin sand is poor in collapsibility when it is used for al alloy casting, specially for some large, thin section castings.
呋喃树脂砂用于铝合金铸造时，特别是对于一些大型、薄壁铝合金铸件，型芯的溃散性较差。
Furan resin sand is poor in collapsibility when it is used for al alloy casting, specially for some large, thin section castings.
应用推荐