介绍了短厚型机架的铸造工艺设计及其优化。
The foundry process design and the optimization of short and thick type housings have been described in this article.
本文研究了计算机在磨球铸造工艺设计中的应用。
The paper deals with application of Compter in ball technology design.
介绍了铁素体基体球铁减速器壳体的铸造工艺设计。
The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.
数值模拟技术的应用，为铸造工艺设计提供了一种有效的工具。
Applications of numerical simulation technique offer a efficient tool for casting technological design.
计算机模拟技术的应用，为铸造工艺设计提供了一种新的工具。
Applications of numerical simulation technique offer a new tool for casting technological design.
基于温度场分析结果的铸件缩孔缩松预测可以优化铸造工艺设计。
Based on calculated temperature distribution in the casting, the prediction of shrinkage defects can be achieved, which can be used as a tool to optimize the design of foundry technology.
该技术在辅助铸造工艺设计，优化工艺方案以及缺陷分析等方面可以提供有力的支持。
This simulating technology could give powerful support for aiding the design of foundry technology, optimizing foundry process and analyzing the cast defects.
简要介绍了计算机辅助绘图软件AUTOCAD的二次开发及其在铸造工艺设计中的应用。
The secondary exploitation of AUTOCAD and its application in foundry technology is described. Traditional foundry technological design is quite tedious and time-consuming.
还就工艺因素对残余应力的影响作了分析，建议在铸造工艺设计中增添关于低应力设计准则的内容。
It is proposed that the effects of technological factors on the residual stress are necessary for technological design of castings.
形状复杂的铸件热节多，相互之间又有较大的影响，其凝固过程不易准确掌握，这就为铸造工艺设计带来困难。
The solidification process of complex - shape casting is too complex to analyse with experiment or experienced method. This causes it very difficult to design the casting process correctly.
并从结构设计及铸造工艺设计两方面提出了防止球铁井盖上表面缩凹的措施，这些方法在生产实践中已得到检验。
Some prevention methods were proposed from two aspects of structural design and casting processing which has been verified by production practice.
本节讨论砂型铸造工艺，包括型模、浇注口、浇道、设计考虑因素及铸造余量。
The processes of sand casting are discussed in this section, including patterns, sprues and runners, design considerations, and casting allowance.
介绍了汽车壳体零件低压铸造工艺与模具设计。
The low-pressure casting process and die design for automobile housing were introduced.
在铸造模具设计中，缩短设计周期、优化铸造工艺具有重要意义。
It is very important to shorten design cycle and optimize casting technique when designing casting mold.
铸造过程的数值模拟可以优化工艺设计，缩短产品试制周期，降低成本，减少铸件缺陷，确保铸件质量。
Numerical simulation for casting process may optimize craft design, shorting trial cycle, cut the cost, decrease casting defect and assure the casting quality.
主要介绍了近期为一铸造公司设计的简易树脂砂生产线工艺特性以及设计的指导思想和设备选用情况。
This paper mainly describes the process characteristics, design guiding principle and equipment choice of a simple resin sand production line designed for a foundry company.
设计改进分三个阶段，即局部几何性应力集中改进、提高铸造质量的纯工艺改进和锻焊组合结构抱轴箱体的设计。
Design improvement is in three stages partial, geometrical stress concentration improvement, pure casting technology improvement and a forge-weld box body design.
并结合工厂管卡零件进行了铸造工艺辅助设计。
The authors have designed the casting process of the housing part from a factory.
作者开发了铸钢件铸造工艺计算机辅助设计程序。
A computer program has been developed by the authors to design the casting technology for steel castings.
本文针对复杂铝合金玻璃检具毛坯的设计和制造，对其铸造工艺、合金成分、缺陷展开了研究。
Aiming to the manufacturing of the automobile glass checking tools, the casting technology and the porosity defect of the checking tools were researched in this paper.
介绍了具有导电性能要求的铝合金导体铸件的低压铸造模具的结构设计，确定了其低压铸造工艺参数。
The design of mould structure of a conductive aluminum alloy castings in low pressure casting was described, and its processing parameters was determined also.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
从市场分析入手，对EPC法与传统砂型铸造工艺进行了比较，介绍了EPC法生产球墨铸铁管件的工程设计内容及对策，并提出了工艺设计的关键点。
Based on analysis of market conventional sand mold cast process has been compared with EPC process of which design and measures for s. g. iron pipes have been introduced as well as key of technology.
开发了具有功能全面、使用方便、适用面广等特点的铸钢件铸造工艺计算机辅助设计软件。
A flexible software with versatile functions was presented, which can be used conveniently in the design of the steel casting process.
这种预测方法操作简单，计算迅速，可对铸件工艺图上指定部位进行预测，与模数法设计铸造工艺相辅相成。
This prediction method is simple and quick, and can predict any section in the casting. It is supplemented each other with modulus design method of casting process.
本文以铁路货车铸钢件摇枕为例，介绍三维铸造工艺与模具设计系统的开发流程。
Developing flow of system of 3d foundry technology and mould design has been introduced by taking an example.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
为了改善筛板材质的性能，对其化学成分进行了科学设计，并探讨了铸造和热处理工艺。
In order to improve the properties of the screen plate, we scientifically designed the chemical composition of a new abrasion-resistant cast iron, studied its foundry and heat treatment parameters.
本文通过设计和选择真空实型铸造主要工艺装备，试验研究了所设计的真空实型铸造装备的工艺性能。
This paper is concerned with the design of vacuum full-mold casting equipment. The processing properties of this equipment are also studied in this paper.
本文通过设计和选择真空实型铸造主要工艺装备，试验研究了所设计的真空实型铸造装备的工艺性能。
This paper is concerned with the design of vacuum full-mold casting equipment. The processing properties of this equipment are also studied in this paper.
应用推荐