厚钢板的钢种大体上和薄钢板相同。
SUS430是铁素体不锈钢钢种之一。
文中提出了确定钢种系数K _的方法。
A method of determining steel grade coefficient K_PG had been developed.
对工艺、技术材料管理完善，生产钢种齐全。
Of technology, technical materials management improvement, the production of steel complete.
LF炉成分的精确控制是生产优质钢种的基础。
The LF ladle furnaces ingredient accuracy control is the production high quality aluminum foundation.
文中结合一些典型的高附加值钢种作了重点介绍。
The paper highlights some typical high value-added steel grades.
硅钢是双辊薄带连铸工艺最具开发潜力的钢种之一。
Silicon steel is one of the most potential steel grades that can be produced with twin roll strip casting process.
用合理的模型结构形式回归了两钢种的热轧变形抗力模型。
The deformation resistance models of two steels during hot rolling have been established with regression analysis of reasonable structural formula.
由于该钢种所固有的特性，在热轧生产中易产生加工缺陷。
Because of its inherent characteristics, its processing defects are prone to appear on the hot rolling production line.
提出了在不同温度下可能替代25 - 20钢的钢种及依据。
Furthermore, the new steel type with the possibility of replacing 25-20 steels and (corresponding) foundation had been suggested.
由此，在连铸不同钢种时，连铸工艺参数的选择与控制的重点也各不相同。
After all, the choice and control of continuous casting process parameters are also different during continuous casting different steel grade.
结果表明，新钢种在中温浓硫酸中，具有比RS-2优越得多的耐蚀性能。
The results show that the new steel is much better than RS-2 in corrosion resistance to medium temperature concentrated sulfuric acid.
本文对T23（P23）钢的工艺焊接性进行评价，有助于该钢种的应用。
The paper assessed the procedure weldability of T23(P23) steel, which offers great help to the applications of T23(P23) steel.
它还包括应用于桥梁、管道、压力容器、汽车制造、造船以及焊接钢种等钢材。
It also includes application steels for Bridges, pipes, pressure vessels, automotive manufacturing, shipbuilding and welding steel grades.
NTMK的生产能力可制造多达150个以上的钢种的800个类型的轧钢产品。
NTMK's capacity allows manufacturing up to 800 types of rolled steel products of more than 150 steel grades.
反之，也可根据对某一直径钢球的淬硬层深度的要求，选择具有适当淬透性的钢种。
Conversely, according to the demand of hardening depth of a certain diameter of steel sphere, a steel kind of suitable hardenability can be selected.
研究了不同变形量、钢种、硬化程度、模角和拔制速度对空拔管直径缩小量的影响。
The effects of various amounts of deformation, steel grades, degrees of hardenability, die entry angle and drawing speeds on dia. sinking drawing are studied.
P 92钢是目前超超临界机组主蒸汽管道的应用钢种，其蠕变断裂寿命被广泛关注。
The P92 steel is a steel sort being used for main steam pipelines of ultra-supercritical units at present, its creep rupture life has widely drawn close attention.
通过对新钢种的工艺评定，编制了合理的工艺规程，使压缩机低温钢焊接机壳获得成功。
By evaluating the technology of new steel type and compiling reasonable process procedure, welding casing made of low temperature steel has been achieved successfully.
表明稀土对结晶器保护渣使用性能有一定影响，不同保护渣、不同钢种影响规律不尽相同。
It shows that the rare earth influences mould flux properties, the influence varied when using different mould fluxes and different steel grades.
结果表明，该钢种及选用的焊接材料的水冷抗裂性及埋弧焊接头综合性能均满足了工程要求。
The results showed that the crack resistance and the mechanical properties for the steel matched with welding materials can meet the requirements of the project.
介绍了大秦线车轮的服役表现，探讨了重载运输条件下车辆轴重增加对车轮钢种特性的要求。
The requirements on steel types and features of wheels with increase of axle load of heavy haul vehicles are discussed.
应用电弧炉单渣法炼钢的改进工艺，能广泛用于诸多钢种的熔炼，具有较强的实用性、灵活性。
A new technique of applying arc furnace single-slag manner smelting steel can widely be used in varies of steels smelting, and possess preferable practicality and agility.
珠光体轨道钢是目前我国铁路轨道采用的主要钢种，其性能特点是抗磨损性能好，屈服强度高。
The pearlitic rail steel was widely used as rail track in China for its prominent performance in anti-wearing and high yield strength.
介绍了D652新钢种的研制及采用该钢种试制起重臂用冷轧(拔)无缝钢管的工艺研究情况。
Introduced in the paper are the development of the new D652 steel and the research concerning the trial production of the cold-rolled (drawn) seamless tubes for lifting arm with the said steel.
通过加强培训，开展技术竞赛，严格考核，纠正自由炼钢，提高专用钢种命中率，满足市场需要。
We rectify the free steelmaking and improve the hitting rate of special steel grade as well as meet the market need by strengthening train, launching technology race, and assessing strictly.
本文介绍了平炉、转炉不同钢包容量、不同生产工艺条件和不同钢种进行钢包喂铝丝试验的情况。
The article introduced trials on feeding Al-wire into open hearth ladles and converter ladles with various volumetric capacities under different processing conditions and for different Steel grades.
本文介绍了平炉、转炉不同钢包容量、不同生产工艺条件和不同钢种进行钢包喂铝丝试验的情况。
The article introduced trials on feeding Al-wire into open hearth ladles and converter ladles with various volumetric capacities under different processing conditions and for different Steel grades.
应用推荐