这项技术听起来有些怪异,而事实上它确实是韩国成均馆大学纳米技术学院的研究员金相宇博士的新发明。
The idea sounds funny but it is actually the result of a new invention by a researcher at the Institute of Nanotechnology at Sungkyunkwan University in Seoul, South Korea, Dr. Sang-Woo Kim.
运用金相显微镜、描电镜和能谱仪,研究了前雾灯遮光罩表面处理后起泡的原因。
The causes of the front fog lamp shield blistering after surface treatment are studied by means of metalloscopy scanning electronic microscope and energy spectrum analysis.
以金相学理论基础,金相检测是一种用于研究金属材料内部结构组织与材料性能之间关系的检测技术。
Metallography detection is a technology that studies about the relationship between the structure and the performance of metal material based on the metallographic theory.
医药行业的资金相当的复杂,但是在现的医学研究文化的中的原则之中,纳入了财务利益冲突的申明。
Pharmaceutical industry funding can be complex, but the general principle of declaring financial conflicts of interest is now embedded in medical research culture.
本部分借助剖面金相法针对几种钢进行了启裂韧度的研究。
This paper research the initiation toughness of several kinds of steels using cutting section metallographic method.
通过真空感应炉模拟实验,结合金相分析,研究稀土对于高碳重轨钢奥氏体晶粒尺寸和珠光体片层间距等的影响作用。
Via vacuum induction furnace and metallographical analysis, the effects of RE on the grain size of the austenite and distance of the pearlite laminae of high-carbon steel for heavy rail were studied.
应用金相技术研究了热镀铝工艺对镀铝钢带组织和性能的影响。
Effect of aluminium coating process on the structure and properties of aluminized steel strip was studied using metallographic technique.
采用金相-硬度法研究了中碳钢(40钢)在加热和冷却时的组织转变。
To adopt the metallography hardness method to study microstructure transformation of medial carbon steel 40 being heated and cooled.
通过金相技术、力学性能试验和SEM技术研究了6061-T6铝合金真空电子束焊接接头的金相组织、力学性能和断口形貌特征。
The metallurgical structures, mechanical properties and fractographs of EB welded 6061-T6 aluminum alloy joint were studied by means of metallography, mechanical test and SEM technology.
研究了热影响区宽度和金相结构。
The heat-affected zone and the metallographic structure are studied.
还研究了放热效应,金相组织与涂层过渡层。
Exothermic efficiency, metallographical structure and transition region of coating layer were also investigated.
概述金相技术的进展及其对相变研究的重要意义。
The advance of metallographic technique and its significance in the study of phase transformation is generally described.
通过研究定量金相技术为半固态微观组织的固相率,晶粒大小,晶粒尺寸分布和形状分布的图像处理提供了理论依据和计算方法。
The paper has provided theoretical basis and computation method of the four measuring items of microstructure for digital image processing by studying quantitative metallography.
用金相探针法研究了一种低偏析高温合金的凝固。
The metallography microprobe method has been used to study the solidification process and segregation of a low segregated superalloy.
利用计算机对金相组织进行定量分析是金相组织分析中一条重要的研究方向。
Quantitative analysis for metallography structure with computer is a important research direction in analysis for metallography structure.
通过对粗晶合金性能的检测和金相组织的观察,研究了碳含量对粗晶硬质合金性能的影响。
The effect of carbide content on the properties of coarse grained cemented carbide is studied by means of measuring properties and observing polished cross section.
采用金相显微镜和硬度计研究了多层熔覆对激光熔覆层微观组织和硬度的影响。
The influences of multilayer cladding on the microstructure and hardness of laser-clad layers were studied by metallographic microscope and hardometer.
采用金相和扫描电镜分析研究了锑、镁在铝硅合金中的存在形式和变质机制。
Modification mechanism and existing form of Sb and Mg in Al-Si alloy were studied by using optical microscope and scanning electron microscope.
介绍了用金相法研究钢中夹杂物所存在的问题,以及用酸性电解液电解分离钢中夹杂物所存在的问题。
This paper introduces that the question of metallographic approach of the inclusions in steel and the acid electrolytic liquid in the process of electrolytic separation.
利用光学显微镜、扫描电镜、定量金相等技术研究了冷却速度、铅含量、重力作用等对铝铅合金显微组织的影响。
The effects of cooling velocity, the lead content and the gravity on the microstructures of Al Pb alloy were discussed based on the results of optical microscope, SEM and quantitative metallography.
采用自行研制的倾斜取样板进行取样,并借助金相图像分析系统研究了半固态高铬铸铁先共晶奥氏体的衍变过程。
The evolution of pro-eutectic austenite in semi-solid high chromium cast iron was studied by self-made slope sampling plate through metallographical image analysis system.
利用金相显微镜和SEM研究了合金的形貌,利用EDS和XRD研究了合金的成分,并测定了合金的密度和硬度。
The microstructure was observed through optical microscope and SEM. The composition was studied by EDS and XRD. And the density and hardness were also measured.
本文以金相分析与断裂力学方法研究了主蒸汽管道蠕变破裂过程。
In this paper, the fracture process in creep of main steam pipeline is studied by metallographical and fracture mechanics.
研究了激光焊接的参数和焊缝的金相组织。
Process parameters and the metallurgy aspect of the weld are studied.
通过硬度试验、冲击试验、断口扫描和金相组织观察,研究了T92钢焊接接头的韧性与组织的关系。
Through hardness test, impacting test, SEM of failure surface and microstructure observation, the relationship between the toughness and its microstructure of welding joint of T92 steel was studied.
采用涂层断面金相、X射线衍射、扫描电镜分析方法,研究了涂层微观形貌、组织结构、组成成份。
With coat section metallographic, X-ray diffraction and scanning electrical mirror analysis method, have studied coat microscopic shape look, organization structure and the coating's composition.
通过金相法和磁声发射法(MAE)研究了高牌号无取向硅钢脱碳退火时所产生的内氧化层。
The subsurface oxide layers generated during decarburizing annealing of high grade non-oriented silicon steel sheet were studied by metallographical method and magnetoacoustic emission method(MAE).
金相学:研究金属与合金组织结构的学科,特别指采用显微镜和X射线衍射技术进行的这类研究。
Metallography: Study of the structure of metals and alloys, particularly using microscopic and X-ray diffraction techniques.
通过力学性能和耐磨性能测试、金相组织观察和ESEM形貌分析,研究了氮含量对低碳高铬铸铁性能的影响。
The effects of nitrogen on the properties of low carbon high chromium cast iron were studied by mechanical property and wear resistance test, and metallograph analysis using OM and ESEM.
通过力学性能和耐磨性能测试、金相组织观察和ESEM形貌分析,研究了氮含量对低碳高铬铸铁性能的影响。
The effects of nitrogen on the properties of low carbon high chromium cast iron were studied by mechanical property and wear resistance test, and metallograph analysis using OM and ESEM.
应用推荐