全可变气门机构能实现发动机配气定时和气门升程的连续可变,是可变气门技术的发展趋势。
Fully variable valve train may realize continuously variable valve timing and valve lift, and so it represents development trend of variable valve technology.
配气可变机构可使发动机在较高转速和全负荷范围都能得到最佳配气,因而改善了发动机性能。
Variable valve train enables the engine to achieve the best valve timing at a very high speed and load. Thus the performance of the engine can be improved.
电磁控制进排气门是一种新型的可变配气相位技术,在发动机上以电磁驱动气门比传统的凸轮驱动方式具有更大的优越性。
Electromagnetic control valve actuation is a new kind of variable valve timing technology. It can offer more advantages than general camshaft valve actuation when used in the engine.
对动态法配气的量值不确定度进行了评定。
And the uncertainty of dynamic volumetric method was evaluated.
研制了用于制取肼类标准气体的动态配气装置。
A developed dynamic hydrazine vapor generator is introduced to gain the standard hydrazine vapor.
分析了配气正时对可变进气系统充气效率的影响。
Influence of valve timing on air intake efficiency of the variable air intake system is analyzed.
不同的发动机,其配气相位和气门重叠是不一样的。
This is called valve overlap. Valve timing and valve overlap vary on different engines.
活塞组采用两道压缩环,密封能力强、配气定时准确;
There are two compression rings for the piston group which guarantees good sealing performance and accurate valve timing.
顶置凸轮,链条传动,正时配气系统传动平稳,噪音小。
Upward camshaft; chain transmission; timing distribution system is stable and has little noise.
顶置凸轮,链条传动,正时配气系统传动平稳,噪音小。
Upward camshaft; chain transmission; timing gas distribution system is stable and has little noise.
介绍食品气调小包装中,简易的配气装置、原理和方法。
A simple and easy mixture device and its principle and method in the small packaging of food modified atmosphere packaging are introduced.
一种发动机配气装置,其属于发动机结构和测试技术领域。
The utility model relates to a gas distribution device of an engine, which belongs to the technical field of an engine structure and a test.
在对测定结果分析的基础上提出了影响配气正时变动的主要因素。
By the analysis of the measuring results, the basic factors which would change valve timing were given.
本发明阀体的控制系统结构简单、可靠性高,配气的效率及精准度高。
The control system of the valve body is simple in structure, high in reliability and is high in air distribution efficiency and precision.
本文提出一种高速车用柴油机配气凸轮的型线——复合摆线凸轮轮廓。
Cam Profile - Combined - Cycloidal curve used for high speed Automobile Engine intake and exhaust valves is proposed.
本文对高速柴油机配气定时进行了优化计算,并在单缸机上进行了试验。
This paper performs optimum calculations of air distribution timing of high speed diesel engines, Experiments are made on a single cylinder.
对比分析了单质量模型和二质量模型,归纳了影响配气系统的主要因素。
Contrast and analyze single lumped mass and two lumped mass, conclude main factors which affect valve system.
这种配气装置为在气缸盖顶部设置密闭的透明视窗留出了足够的空间。
The gas distribution device leaves enough space for an airtight transparent window which is arranged on the top part of a cylinder cover.
这种耦合振动分析的观点,可以为全面探索配气系统的振动规律提供帮助。
This concept of coupled vibration analysis is helpful to detecting vibratorylaws of valve system.
低转动惯量摇臂的设计是近代高速内燃机配气系统结构设计的重要发展趋势之一。
The design of a rocker arm with low rotating inertia is one of the important development trends of the valve timing system structural design for a modern high -speed internal combustion engine.
本文采用模糊控制技术解决汽油机在整个工作范围内实现优化配气相位可变的问题。
In this paper, the problem for realizing optimized valve phases in the range of engine work status is solved by fuzzy control.
用模拟配气系统研究了贫氧、富氧和化学计量等活化气体对新鲜催化剂性能的影响。
Influence of activating gases with poor, rich and stoichiometric oxygen was tested with simulative gas formulating system.
以12t基准气华白数配气得到的掺混气可以替代天然气作为补充气源或应急气源。
The gas mixture prepared according to Wobbe index of 12t reference gas can replace natural gas as a supplemental gas source or emergency gas source.
城市配气管网作为输气管道的下游配套工程,是天然气顺利进入沿线城市的重要环节。
As a part of gas transmission pipeline project, the city gas distribution pipeline network is a very important component for the new gas to enter into the city.
已有的配气凸轮实测升程数据的优化拟合研究基本上都是针对对称型配气凸轮展开的。
Some optimum fitting methods for treating the measured lift data of the symmetrical CAM profile are presented in the previous decades.
介绍了一种基于双凸轮结构的摩托车发动机可变配气正时(VVT)机构自动控制装置。
An automatic control device of motorcycle variable valve timing (VVT) mechanism is introduced based on double CAM structure.
配制的标准气体与静态容量法配气装置配制的标准气体进行了比较,相对偏差在3%以内。
The calibration gases are verified by the calibration gases prepared with static volumetric method, and the relative deviation between them is less than 3%.
根据道尔顿分压定律,利用中压储罐进行混气,设计了一套低压储气、连续的自动配气装置。
In this paper, automatic and continuous mixture equipment, supported by medium pressure bomb, is designed based on Dalton's law to supply low pressure gases.
根据道尔顿分压定律,利用中压储罐进行混气,设计了一套低压储气、连续的自动配气装置。
In this paper, automatic and continuous mixture equipment, supported by medium pressure bomb, is designed based on Dalton's law to supply low pressure gases.
应用推荐