调节为基础,利用快速可控硅做开关元件,研制的一台新型等离子弧切割电源——输出直流100a逆变切割电源。
M. adjusted, by the use of high speed SCR gate, a new convening power source with output of 100a for plasma are cutting is developed.
本论文主要介绍了所研制的单片机控制逆变埋弧焊机的组成结构和控制原理。
The component parts and control principle of pulsed SAW inverter power source are mainly introduced in the paper.
机器人逆运动学分析方法在实际中得到了应用,为实现弧焊机器人系统路径规划和离线编程奠定了基础。
The method put forward is practical application and lays a foundation for path-planning and off-line programming for robot welding system.
介绍了CPV350型逆变电焊机与弧焊机器人控制系统的连接方法。
In this paper, the method integrating CPV350 inverter welding machine to arc welding robot control system is introduced.
提出采用大功率IGBT设计变极性脉冲MIG焊双逆变弧焊电源。
The high-power IGBTs are adopted to design the dual inverter arc-welding power source for variable polarity pulse MIG welding.
本文介绍了逆变式等离子弧切割机的工作原理、使用方法和维修措施。
The principle, operation and repair of invert plasma are cutting machine are introduced in this paper.
结果表明:这种新型的大功率埋弧逆变自动焊机有着广阔的应用前景。
The result shows that this newfashioned high-power machine of submerged-arc welding inverter has wide prospect of application.
逆冲型地震主要发生在环太平洋地震带上,在喜马拉雅碰撞边界和巽他弧也有发生。
The thrust earthquakes are mainly distributed on the circum-pacific seismic belt, the Himalaya collision boundary and the Sunda arc.
本文在传统晶闸管逆变弧焊电源的基础上,实现了采用8098单片机系统的微机控制模式。
In this paper, the micro-computer controll mode adopting 8098 slice computer system is realized on the basis of traditional thyristor arc welding rectifier.
为了进行电源系统分析和设计,本文建立了电压模式和峰值电流模式控制的逆变弧焊电源数学模型,并用计算机进行分析。
In order analyze and design the power supply system, the system models which control by two above-mentioned control modes are established and analyzed by computer.
逆变式弧焊电源是新一代的弧焊电源,其特点是速度快,直流输出电流波纹小,电弧稳定,质量小,体积小,能耗低。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
本文介绍了目前逆变式弧焊机的基本原理和技术现状,并指出了有待进一步解决的几个技术问题。
This paper introduces the basic principle and the technical status quo of the current inversion arc welding machines, and points out several technical problems needed to be resolved.
这些引弧器的应用对于提高逆变焊机的引弧性能、可靠性等有较大的益处。
These arc strikers are of value for improving arc strike behaviour and reliability of invert welding power sources.
利用大功率器件、逆变技术和PWM集成控制器,构成了一种新型的弧焊逆变电源。
There is a new- style arc- welding inverter, using powerful component and invert technique and PWM integrated controller.
针对手工焊条电弧焊(MMA)弧焊过程特点,建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
采用状态空间平均法建立了全桥逆变式弧焊电源主回路的平均状态方程,经过线性化处理推导出频域小信号模型。
The paper introduces the dynamic characteristic and the structure of arc welding power, and gives a method of designing arc welding power which using DSP chip as a controller.
介绍了该逆变式弧焊机的构成,工作原理及特点。
The paper introduces the configuration, principle and characteristics of the inverter for arc welder.
本文提出了逆变式弧焊电源高频变压器的设计步骤、方法以及实例。
The design procedures and examples of high frequency transformer Used in Inverter ArcWelding Power Source are proposed in this paper.
采用具有全程调速器的内燃发动机、发电机、逆变弧焊电源,以及二次控制系统构成发电电焊两用机。
Generating and welding dual use set consists of generator, welding inverter, automatic control system, and internal-combustion engine controlled by speed regulator.
针对IGBT逆变埋弧焊机设计了基于单片机80c 196kc的控制系统,介绍了系统的软、硬件组成和控制原理。
A control system based on monolithic computer 80c196kc is designed for IGBT welding inverter with submerged arc. The software, hardware, and control principle of the system are introduced.
结合逆变弧焊电源的工作特点,详细介绍了其高频变压器的设计方法。
The design of high frequency transformer in inverter arc welding power is introduced, which is based on the characteristics of inverter arc welding power.
研制开发出一种单片机控制的新型IG BT逆变埋弧自动焊机。
A new IGBT inverter control by SCM for submerged arc welding is developed.
本文为熔化极CO2保护的IGBT逆变半自动弧焊机电源研制了一套控制系统。
In this thesis, a set of control system is developed for IGBT inverter power supply of consumable-electrode CO2 shielded arc-welding machine.
可供设计逆变式弧焊电源时参考。
The designs for inverter arc welding power sources are available for reference.
弧焊电源一次逆变控制电流快速动态过程,二次逆变控制电弧极性。
Dynamic process of current is controlled quickly by the first inverter, and arc polarity is controlled by the second inverter of arc welding power source.
本文介绍了一种新型交流逆变式弧焊电源。
A new system of inverter for arc welding is introduced in this paper, which gives medium frequency AC current.
介绍了一种用逆变方式和倍压整流方式构成的中频逆变式引弧器,并对其工作原理及参数设计进行了分析。
A medium frequency pulsed starting arc unit, which consistS of a voltage dowble is introduced in this paper, and its working principle and parameter design are also analyzed.
提出了一种新的软开关逆变弧焊电源的设计方案,该方案基本上可实现空载、短路、燃弧全负载范围内的软开关状态。
This article introduces a new design plan of soft switch invert welding power source, which can almost get in soft switch state under no-load, short circuit or load.
控制电路是逆变弧焊机的技术关键之一。
The control circuit is one of technology keys of arc welding inverter.
控制电路是逆变弧焊机的技术关键之一。
The control circuit is one of technology keys of arc welding inverter.
应用推荐