我假设您或您的SAN存储管理员已经布好线、配置并连接好了新的SAN存储设备与您现有的SAN。
I'm going to assume that you or your SAN storage administrator have already cabled, configured and connected your new SAN storage device to your existing SAN.
这使得只要使用现有网络就能打开并连接无线设备—无需新的配置,也无需特殊路由。
This allows wireless devices to simply be turned on and attached using your existing network — no new configuration, no special routing.
配置连接到系统的设备。
API对蓝牙A2DP和HSP配置的支持使得应用可以查询连接的蓝牙设备所提供的蓝牙协定、音频栈等,并通知用户。
API support for Bluetooth A2DP and HSP profiles lets applications query Bluetooth profiles for connected devices, audio state, and more, then notify the user.
连接,配置并检查设备接口的工作状态。
Connect, configure, and verify operation status of a device interface.
早期的网桥、协议转换器和路由器都是简单的专用硬件设备,通常是通过直接连接到该设备本身串口的终端来配置的。
Early network Bridges, protocol converters, and routers were simple dedicated hardware units typically configured through a terminal directly connected to a serial port on the unit itself.
在很大程度上,设备并不需要很多手工配置工作;它可以连接到蓝牙电话或无线网络上,这种连接可以自动实现也可以在用户进行少量干预下实现。
For the most part, the device doesn't require a lot of manual configuration; it can connect to Bluetooth phones or Wi-Fi networks, either automatically or with minimal instruction.
由于您已经有一个可能具备许多实例(即针对每个连接的设备进行了配置)的代理,将使用托管的服务工厂接口。
Since you have an agent that might have many instances (that is, one configured for each attached device) the managed service factory interface is used.
规范层次结构的基部是通用访问配置文件(GAP),定义了一系列实现在不同设备间建立基带连接的方法。
At the base of the profile hierarchy is the generic access profile (GAP), which defines a consistent means to establish a baseband link between Bluetooth devices.
J 2 ME连接有限设备配置。
基于此,服务发现应用配置文件规定任何应用程序能够在任何要连接的蓝牙设备上找出有哪些有效服务。
Based on this, the service discovery application profile requires that any application be able to find out what services are available on any Bluetooth device it connects to.
目前,有两个J2ME的配置:连接限制的设备配置,和连接的设备配置。
Currently, there are two J2ME configurations: the Connected Limited Device configuration, and the Connected Device configuration.
当连接和配置后,头戴式耳机可以充当远程设备的输入输出接口。
When connected and configured, the headset can act as the remote device's audio input and output interface.
某些系统配置,包括旋启式止回阀直接连接到其他法兰设备的场合可能要求考虑这种螺栓所需要的间隔。
Certain system configurations involving direct connection of a Swing Check Valve to other flanged equipment may require consideration of this bolt clearance.
如何配置SQLCE连接智能设备上应用程序使用模拟器?。
How to Configure SQLCE connection on Smart Device Application using Emulator?
配置了SD读卡器及USB接口,用户可以通过附赠的音频线将它与电脑等设备连接,播放音乐。
SD card reader and configure the USB interface, user can pass throw in audio line will be it with computers, music, play device to connect.
旅行在外,连接任何WIFI网络之前,请确定你的设备配置恰当并装有安全防护软件,以防他人侵扰窥觑。
Before connecting to any WIFI network while traveling make sure that your device has the proper Settings and safeguards in place to prevent others from accessing your device and snooping around.
一种用于确定存储在PROM中数据的完整性的方法和设备,其中PROM配置了至少一个连接到两组块的保持锁存器。
A method and apparatus for determining the integrity of data stored in a PROM device provides at least one holding latch connected to two sets of blocks.
通用操作有设备的动态连接与移去、设置地址、信息配置、数据传送、电源管理、请求处理及出错处理等。
The common operations are dynamic attachment and removal, address assignment, configuration, data transfer, power management, request processing, request error.
每台设备的连接点上都将配置cti。
可卷曲部分(18)连接至可伸缩部分(19),并且配置成用于耦合至矫正设备(14)。
The crimpable portion (18) is attached to the telescopable portion (19) and is configured for coupling to a corrective device (14).
可卷曲部分(18)连接至可伸缩部分(19),并且配置成用于耦合至矫正设备(14)。
The crimpable portion (18) is attached to the telescopable portion (19) and is configured for coupling to a corrective device (14).
应用推荐