缩进给你一个关于哪些行是相互关联的视觉提示。
The indentation gives you a visual cue as to which lines are related to each other.
当进给速度不恒定时，会造成许多问题。
When the velocity (feed rate) is not constant, several problems can result.
进给速度对钻削力的影响最为明显。
The effect of the feedrate to drilling force is the most significant.
热板的水平进给运动由气缸驱动。
通过摇动复式刀架操纵柄手动提供进给。
Feed is manually provided by cranking the handle of the compound rest.
在钻深孔的时候，有时必须放松进给运动。
When drilling deep holes, the feed movement should be released from time to time.
他们甚至把这个故事编进给小孩看的连环画里面。
那我们一定要把这一点写进给总裁彼得的报告里。
Let's be sure to include that in our report to our President, Peter.
粗车刀具按其进给方向可以是右手型的或是左手型的。
Rough turning tools can be right-hand or left-hand types, depending upon the direction of feed.
直线电机进给单元是高速数控机床的一种新型进给系统。
Linear motor driven system is a new kind of feed system for CNC machine tools.
切削用量三要素包括切削速度、进给量和（或叫吃刀量）。
Thee three factors of cutting include cutting speed, feed and the depth of cut.
刀具还可以设置一种边切进给率，以使用于横向的刀具移动。
The tool can have an additional 'side-increment' feedrate, which is applied to step-over moves.
滚珠丝杠由于运动效率高、发热小，故可实现高速进给(运动)。
Ball screw due to high movement efficiency, small heat, it can achieve high-speed feed (motion).
本文设计的重点在于进给系统液压缸的设计和PLC控制系统的设计。
The important parts of the thesis are the design of hydraulic feeds system and PLC control system.
如前所述，当依靠驱动大拖板的丝杆切削螺纹时轴向进给是自动产生的。
As previously mentioned, the axial feed is automatically generated when cutting a thread by means of the lead screw, which drives the carriage.
老式机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。
Early machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.
锯切速度曲线是不可变的，但进给速度曲线随进给机构杆长比的不同而变化。
The sawing speed curve is unchangeable, but the feed speed curve can be different with different length ratio of members of the feeding mechanism.
本机具有磨削范围广，进给如意调节，体积小，结构精致，操作方便等优点。
The machine has a wide range of grinding, feed wishful regulation, small size, delicate structure, convenient operation and so on.
为满足进给机构控制系统实时性要求，设计了基于DSP的直线电动机控制器。
To satisfy the feed mechanism's real-time performance, the linear motor controller is designed based on Digital Signal Processor (DSP).
至于涉及到铣刀转动的方向和工件的进给，铣削可以通过下列两种方法之一进行。
As far as the direction of cutter rotation and workpiece feed are concerned, milling is performed by either of the following two methods.
所有液压设备都要进行调节，并在规定的的速度下进行横向进给和提升运动操作。
All equipment should be adjusted to operate at the required speed and with the specified traverse and lift motion for all hydraulic equipment.
轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。
The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.
设计的改进给了你一个理由去看这款车，而质量品质的进步使你没有理由转身走掉。
The improved designs give you a reason to look and improved quality gives you no reason to turn away.
即使这种似乎在朝着不同方向的行进给你一种你确实在做什么的感觉，那还是个幻觉。
Even if this going towards what seems different gives you the feeling that you are really doing something, it is an illusion.
在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。
During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.
横向方法：这种方法中砂轮与工件均旋转且采用线性纵向进给以保证能磨削整个长度。
The transverse method, in which both the grinding wheel and the workpiece rotate and longitudinal linear feed is applied to enable grinding of the whole length.
新硬件支持、软件支持和内部的内核改进给 2.6 内核带来了更好的扩展性和稳定性。
New hardware support, software support, and internal kernel improvements give the 2.6 kernel better scalability and stability.
进给越小生成的光洁度越好，而在刀具与工件直接接触时进给越大则可以减少机加工时间。
Finer feeds produce better surface finish, whereas higher feeds reduce the machining time during which the tool is in direct contact with the workpiece.
进给越小生成的光洁度越好，而在刀具与工件直接接触时进给越大则可以减少机加工时间。
Finer feeds produce better surface finish, whereas higher feeds reduce the machining time during which the tool is in direct contact with the workpiece.
应用推荐