这是专为过程控制软件交互信息而设计的基于OLE技术的规范。
It was based on the OLE technology standard and designed for the information alteration of the process control software.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
何时执行更新，进度输入是过程控制，不是软件控制。
When to perform update, progress input is control by process, not software.
介绍了在化工生产中过程控制的应用软件系统的保护与快速恢复情况。
The protection and rapid recovery of application software system for process control in chemical production were introduced.
此软件主要应用于大学本科生过程控制系统课程的实验。
This software applies chiefly in the field of undergraduate course experiment of process control system.
详细阐述了过程控制中通讯软件的设计方法以及通讯中的抗干扰方法。
Communication software design method in process control and anti-interference method of communication are described in detail.
其技术含盖从电路保护和能源管理系统到过程控制、工业软件和完整集成自动化解决方案等。
Its technologies range from circuit protection and energy management systems to process control, industrial software and totally integrated automation solutions.
设计了该软件各个部分的处理流程、过程控制、数据结构、用户界面和接口等；
This author has designed the processing flow, course-controlling, data structure and user's interface of each components of the software.
介绍了SPC(统计过程控制)技术的技术流程、应用软件和具体实施方法。
The technique flow, application software and particular implement measures of SPC technology are introduced in this paper.
本文介绍了该系统过程控制级、基础自动化级和现场执行级的主要功能、硬件组成、网络结构及软件设计思想。
The main functions, hardware component, network configuration and software design idea of process control level, basic automation level and field execution level for this control system are described.
本论文使用统计过程控制和控制图表的方法来度量和分析软件过程，达到了商业目的和技术要求。
This paper is using statistical process control and control charts to measure and analyze software processes, and achieves business and technical goals.
介绍了自动剪板机系统的结构组成和工作原理，叙述了8051单片微机实现其生产过程控制的硬件与软件的设计方法。
The structure and the principle of auto board shears have been introduced with the design method of hardware and software implemented by 8051 single chip microcomputer.
介绍了一种基于组态软件的数据管理系统，重点介绍了过程数据的采集和存储，及其在冷连轧过程控制中的应用等。
A kind of data management system based on configurable software, including data collecting, data saving and its using in process control, was introduced.
介绍了包头钢铁公司转炉炼钢过程控制级的软件结构，详细地说明了应用软件、基础软件。
To introduce the software structure of computer process control system for LD converter of Baotou ironand Steel Corporation.
设计了一套优化软件，将先进的智能控制理论运用到发酵过程控制领域中。
Optimal software is designed for ferment process control and the advanced control theories are used in it.
在发动机台架上对微型涡喷发动机进行的起动过程控制和转速闭环调节试验表明，该控制软件在时间精度和可靠性方面能够满足发动机控制的要求。
Engine tests of starting procedure control and rotation speed in closed loop have proven that the time precision and reliability of this software meet the demands of engine control system well.
统计过程控制(SPC)技术的引入及其软件在生产过程中的应用，使得精密连接器的质量在管理技术上得到了保证。
The introduction and the application of the Statistic process Control (SPC) technology used in the produce process made the precision connector's quality guaranteed on the management technology.
介绍了锅炉吹灰器枪管环缝焊接机床的基本组成和工艺过程，设计了基于可编程控制器的电气控制系统和软件系统。
The technological process and the basic construction of a encircling weld lathe for boiler sootblower's pipe are described in this paper.
根据铀浸出液处理过程控制的要求，本文论述了如何用监控组态软件结合PLC可编程序控制器完成对铀水冶的自动控制。
According to control requirements of uranium leaching solution process, the paper discusses the completion of automation for uranium hydrometallurgy process by using SCADA and PLC.
叙述了某大型辊底式炉在轴承套圈余热退火过程中，采用可编程控制器(PLC)作为控制核心，自动进行工作的机械液压传动控制系统的组成、PLC软件设计及编制。
The authors describe the constituent of hydraulic control system and the design of PLC software for some large roller hearth furnace with PLCs as its control centre for annealing bearing RACES.
利用STEP7软件完成了硬件组态和过程控制程序的编写。
The hardware configuration and programming are accomplished with STEP7. The monitoring and controlling of processes is implemented with WinCC.
在实际的过程控制系统中，应用先进的软件技术可以良好地控制过程回路，并能提高产品质量、生产效率，减少停机时间。
In the practical process control system, applying advanced software technology may control process loops well, and improve product quality and efficiency, and decrease stop time.
底层驱动软件主要负责数据采集过程控制、采集数据的传输和存储。
The low level driver controls the data acquisition, data transmission and data storage.
介绍了其焊接原理及整机的构造设计方案，并给出了焊接过程控制系统的硬件构成和软件结构。
The elements and the whole sets of construction design of the automatic steel-pipe electric welding machine were introduced. The composition of hardware and software of the systems were also designed.
介绍了平整线生产工艺流程、电气传动设备的组成、过程控制计算机系统的硬件、软件的构成和控制特点。
This article curtly introduces production process flowsheet, composing of electric gearing devices and hardware & software structure of the process control system for 4 Hi Skinpass Mill Line.
电子统计过程控制：这是一种由铁姆肯公司开发，基于计算机数据采集和统计过程控制的软件。
ELECTRONIC Statistical Process Control: Timken Company developed software for PC based data collection and Statistical Process Control or SPC.
然后设计并实现了一个结合多元统计过程控制方法，基于CORBA技术的多客户端工业过程实时监测软件系统。
Then, a multi-client distributed process monitoring system based on CORBA is developed w using multivariate statistical process control technology for process industries.
第四部分使用一个应用实例——液位过程控制实验系统验证了软件平台的有效性。
In the fourth part, a practical hydraulic level control system is realized to validate the feasibility and rationality of the platforms.
介绍了利用PLC实现跳汰机电磁风阀的过程控制，着重分析了该控制系统的硬件结构和软件设计思想。
This paper introduces the process control of electr o_magnetic valves in jig in which programmable logic controller is used, and mentions software and hardware in details.
介绍了利用PLC实现跳汰机电磁风阀的过程控制，着重分析了该控制系统的硬件结构和软件设计思想。
This paper introduces the process control of electr o_magnetic valves in jig in which programmable logic controller is used, and mentions software and hardware in details.
应用推荐