不过，我们也需要考虑由过程管理器控制的交互和接口。
However, we also need to consider the interactions and interfaces that will be controlled by the process manager.
文中着重简述了专家系统与控制过程的数据通信方法、程序接口。
In this paper mainly describes data communication methods and program interfaces of expert system with control process.
转换过程和数据采集过程通过CS和串行时钟信号进行控制，从而为器件与微处理器或DSP轻松接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
该型含系统控制软件、计算机接口，可在计算机上全程记录和显示测定过程和结果。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
最后，根据不同的车间适用场合，分别介绍了两种制造执行系统和车间过程控制系统的接口方式。
Finally, according to different situations in workshop, two kinds of interface methods between MES and Process Control System were introduced.
本文阐述并分析了目前大多数HIS调用医保接口时存在的数据一致性问题，并结合本单位的实际开发过程，提出了比较有效的控制办法。
This article expounded and analyzed the accordance of data when his is calling medical insurance interface, presented an effective method to control the accordance based on actual developing process.
控制过程中所需的一些配置信息可通过SPI接口从外部FLASH存储器读取，所需记录的数据也可写入该存储器中。
It is available reading some configuration information required by control process from external FLASH memory through SPI interface and writing data records in the memory.
设计了该软件各个部分的处理流程、过程控制、数据结构、用户界面和接口等；
This author has designed the processing flow, course-controlling, data structure and user's interface of each components of the software.
第三章对蓝牙协议，以及蓝牙用户模式、蓝牙的通讯过程、蓝牙主机控制接口(HCI)信息交换命令的数据格式进行了阐述。
In the Chapter 3, it expounds the Bluetooth protocols, the mode Bluetooth users, the process of Bluetooth communication and Bluetooth exchange specific information of Host Control Interface (HCI).
转换过程和数据采集过程通过CS和串行时钟进行控制，从而为器件与微处理器或DSP接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs.
网卡驱动程序控制着网卡的通信过程，并为上层程序提供应用编程接口(API)。
NIC device driver controls the process of network card, and at the same time the device driver provides some application programming interfaces (APIs) for high layers.
本文对TWI通信接口作了概述，重点论述了TWI通信接口在本微控制器中的应用，包括主机与从机的通信过程，主机读写片外EEPROM的工作过程。
This paper discusses the application of TWI in the microcontroller, including the communications between master and slave, between the microcontroller and the serial EEPROM.
设备的主要功能是通过SPI、UART、以太网等通信接口，对整个分选检测过程以及各子工作系统进行控制和异常处理。
The functions of this system are controlling the whole system and other subunits by UART, SPI and other communication methods.
分析了智能网络接口单元的硬件和软件设计过程，介绍了利用智能网络现场控制单元对袋式收尘器进行远程监控的基本原理和方法。
This paper analyzes the designing process of software and hardware for the intelligent network's interface unit, and introduces the basic monitor principles and m...
在数据通信方面，提出了由总线控制器与报文收发器构成的CAN总线接口电路，并详细论述了与总线接口初始化、总线中断处理、总线数据收发相关的设计实现过程。
For the purpose of data communication, the paper lodges the CAN interface circuit, and expatiates the programs of bus initialization, bus interrupt service routing, receiving and sending bus data.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
摘 要：软件接口测试的重点是要检查数据的交换、传递和控制过程，还包括处理的次数。
Absrtact: It is important that checking the data exchange and transfer, controling the process and times for software interface testing.
本文介绍了LSAW自动超声检测过程及控制对象、工艺流程逻辑图、PLC的硬件接口系统及工艺软件编程等。
The technical process and control object of the automatic ultrasonic inspection of LSAW, the logic diagram of technical process, hardware interface system and software program of PLC were introduced.
它由分布式网络 （INFINET） ，过程控制单元 （PCU） ，操作员接口站 （WSA） ，工程师工作站 （EWS）以及计算机接口单元 （CIU）等组成。
It is made up of distributing network (INFI NET), process control unit(PCU), operator interface station (WSA), engineering work station (EWS) and computer interface unit (CIU).
转换过程和数据采集过程均通过标准控制输入进行控制，使器件与微处理器和DSP可实现轻松接口。
The conversion process and data acquisition are controlled using standard control inputs that allow for easy interfacing to microprocessors and DSPs.
转换过程和数据采集过程均通过标准控制输入进行控制，使器件与微处理器和DSP可实现轻松接口。
The conversion process and data acquisition are controlled using standard control inputs that allow easy interfacing with microprocessors and DSPs.
转换过程和数据采集过程均通过标准控制输入进行控制，使器件与微处理器和DSP可实现轻松接口。
The conversion process and data acquisition are controlled using standard control inputs that allow easy interfacing with microprocessors and DSPs.
应用推荐