一个用于显示关键性能指示器的仪表板,比如输入和输出吞吐量,在等待和处理中的请求数量,以及平均的等待和处理时间。
A dashboard must display key performance indicators such as the input and output throughputs, number of requests waiting and in process, and average waiting and processing times.
该系统实现了由应变计组成的电桥测量线路,以及传感器输出信号的处理,并实时传送至显示仪表。
In this system, bridge measurement wiring is composed of foil gauges and signal outputted by sensors is transmitted to the display instrument.
用于需要有模拟信号输出的温度测量仪表和系统。
It is used for temperature measurement instruments and system that is an analogue signal output.
变送器输出——对气动变送器是空气压力——通过管道传给记录或控制仪表。
The transmitter output-air pressure for a pneumatic transmitter-is piped to the recording or control instrument.
该数显仪表可以直接和晶体管输出型的各类PLC连接,实现PLC系统的数据显示功能。
This digital display meter may directly connect with a transistor- output PLC and display data of PLC system.
设计实现了微机控制仪表的一种输出单元电路。
The output unit circuit of microcomputer controlled instrument has been designed and realization.
LTC 6915是具有14级可编程增益的仪表放大器,采用轨对轨输出,其增益可通过串行或并行接口方便设置。
The LTC6915 is a precision programmable gain instrumentation amplifier with rail - to - rail output. The gain can be programmed to 14 levels through a parallel or serial interface.
它包含一个精密的仪表放大器,滤波输出和内置激发供应。
It contains a precision instrumentation amplifier, filtered output and a built-in excitation supply.
仪器的输入端子之间用一个“短路头”连接,其输出到仪表的输入即为零,也可使用仪器前面板上的消零控制或者用计算机控制来置零。
A short circuit can be connected across the input terminals and the output can then be set to zero, either by front panel zero controls or by computer control.
智能化仪表,多种显示功能,大容量存储,标准串行输出,具有强劲扩展功能。
Intelligent instruments, a variety of display functions, large capacity storage, standard serial output, with strong expansion.
模拟电路主要实现了由物理闭环和增益控制闭环构成的驱动系统,以及对一次仪表输出信号进行预处理的信号预处理系统。
Analog circuit mainly realizes the drive system consisting of physical loop and gain-controlled loop and signal pre-processing system which ACTS on output signals from primary instrument.
该仪表能够完成对电机的电压、电流、速度等参数进行采集、处理、输出和显示。
It can collect, process, export and display the parameters of motor's voltage, current and speed.
为了给智能仪表提供廉价标准电流信号输出接口,可以使用RC低通滤波器,从PWM中分离出与占空比成正比的线性直流电压信号。
To provide intelligent instruments with the cheap interface of the standard current sign, the RC low pass filter is used for producing a voltage signal which is proportion to PWM's duty rate from PWM.
该系统利用计算机控制D/A转换器及精密电阻分压器,输出标准电势作为被检仪表的信号源;
In the system, a computer is applied to adjust a D/A device and a precise voltage divider for criterion signal output.
通过工控机实现了伺服控制器、变频控制器、PLC和各个仪表之间的数据通信以及数据报表的输出,达到了实时控制。
The data communication between the servo controller, transducer controller, PLC and every meter, as well as the data report forms is realized through the IPC, and real-time control is also achieved.
电流信号被广泛应用于仪表信号的输出。
The current signal is widely used for the instrument's output signal.
由于仪表的输入与输出一般是呈非线性关系,导致仪表的显示及数据处理十分不便。
Data displaying and processing are inconvenience because of nonlinear relation between the input and output of instrument.
针对我国工业自动化仪表行业普遍应用的各种信号输出制的仪表,设计出仪用标准直流信号源。
This paper designs standard direct current signal source arming at various output standard that are generally used in automatization instrument industry.
应用AL808智能仪表,采用先进的专家智能PID自整定技术,自动整定加热系统的PID参数。 模块输出为可控硅过零触发,输人为热电偶信号。
Two AL808 IRs which can automatically tune PID parameters of the system with expert intelligence, thyristors as the output and thermocouples as the input.
本仪表采用电感调频式传感器直接输出表征位移的数字信号,经单片机处理后,即可显示拉压变形量。
Utilizing variable frequency transducer to get the displacement signal directly, the multimeter can show the tension or compression deformation after the micro-processing of signal.
仪表实现了复费率电能计量、2-31次谐波分析、参量报警、开关量输入输出、液晶显示、人机交互和RS485数据通信功能。
Realize multi-rate billing, 2-31 harmonic analysis, parameter alarm, switch input and output, LCD display, human-computer interaction and RS485 communication.
驱动系统输出信号驱动一次仪表上的线圈工作,模拟了科里奥利力的产生条件。
The drive system outputs to drive magnetic loop on the primary instrument, accordingly simulate the work condition of Coriolis force.
电线适用于电视接收机行输出变压器高压输出,连接高压整流硅与头像管高压及,以及其他电子仪器仪表内部作高压安装及讯号连接作用。
This wire si suitable for TV High voltage as connecting wire between rectify and kinescope, or as connecting wire or fixing wire in other appliance and instrument.
为使这些模拟量或非标准数字协议输出的仪表升级为HART型智能仪表,一般需要定制与之相配套的电子部件或HART协议扩展模块。
If we want to update those analog or non-digital instruments to HART instruments, typically a kind of HART protocol expanding module (electric module) should be custom-designed for them.
所有元器件均来自一个品牌,包括真空断路器,空气断路器,电流接触器,热继电器,驱动,可编程控制器,输入输出模块,电站管理系统继电器和仪表,不间断电源,传感器和照明器材。
All of components come from one brand, from vacuum circuit breakers, air circuit breakers, contactors, thermal relays, drives, PLC, I/O, PMS relays and meters, UPS, sensors and lighting fixtures.
仪表放大器电路以其高输入阻抗、高共模抑制比、低漂移等特点在传感器输出的小信号放大领域得到了广泛的应用。
Instrumental amplifiers with high input impedance, high CMRR and low drift are widely used in the small signal amplifying field.
该仪表通过外部按钮或PLC输出接点可实现对仪表的控制、串行通信和报警等功能。
Functions including control, serial communication and alarm are enabled with buttons and PLC output port on the instrument panel.
该仪表通过外部按钮或PLC输出接点可实现对仪表的控制、串行通信和报警等功能。
Functions including control, serial communication and alarm are enabled with buttons and PLC output port on the instrument panel.
应用推荐