钢结构节点设计中,梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接,螺栓群所承受的荷载有竖向力和偏心力矩。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
本文在总结前人工作的基础上,对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
计算了结构与运动刚体之间的冲击力时程曲线、梁中的剪力及弯矩分布、轴力杆件中的轴力分布。
The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated.
梁非线性动力分析中剪切力和轴力的相互影响。
Interaction of Sheering and Axial Forces in Nonlinear Dynamic Anaysis of Beam.
计算部分预应力混凝土梁开裂后截面应力时,需求解中和轴高度的三次方程,使计算显得比较复杂。
It is rather complicated to compute the neutral axis in partially pre-stressed concrete beams after cracking, since we have to solve a cubic equation.
重力荷载作用下网筒结构外鼓及交叉柱间轴力差异将使环梁受到较大的拉力。
The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.
运用纵横弯曲连续梁理论和达朗伯原理,建立了偏轴钟摆钻具组合动力学分析模型。
A mechanical model for the offset-axes pendulum drill assembly (OAPDA) was established according to the continuous beam theory and the d.
借助与桁架对应的梁的剪力图和弯矩图根据两个关系式可直接求出一般平面平行弦桁架任一根杆件的轴力。
For a complanate parallel chords truss, the axial forces of a member can be solved by the shear-diagram and two simple expressions.
运用弹性梁弯曲振动理论和模态分析法建立了多轴汽车平顺性分析的柔性模型。
A flexible model of multi-axle vehicle ride comfort is presented by combining the vibration theory of elastic beam and modal analysis method.
采用施加在轨道上的一系列移动轴荷载模拟列车作用,利用轨道结构连续弹性双层梁模型,计算出某城市地铁列车运行产生的轨枕与隧道之间的作用力。
Using the continuous elastic double layers beam model of track structure, the forces between the sleepers and the tunnel inlay produced by the running of certain subway train were calculated.
同常规型游梁式抽油机比较,该机型可以显著降低曲柄输出轴的最大扭矩,减小甚至消除负扭矩,在降低能耗的同时改善了减速箱的受力状况。
Compared with conventional beam pumping unit, the swing-rod beam pumping unit can reduce the maximum crank axle torque markedly, reduce and even eliminate negative crank axle torque.
讨论了双轴磁悬挂柔性梁系统的控制问题,该系统是磁悬浮轴承的简化模型。
This paper discusses how to control a two axes magnetic suspension flexible beam system, which is a simplified model for magnetic bearing.
建立了组合梁在任意边界条件下振动与稳定性的状态空间控制方程和振动频率与轴压载荷之间的相互关系式。
The state space equations for vibration and stability of composite laminated beams under axial compression have been derived for arbitrary boundary conditions.
某工程受横向荷载和轴压共同作用的楼面梁因施工缺陷发生初始挠曲。
Initial deflection of the floor beam of a project by lateral loads and co-axial role occurs because of the construction defects.
本文首先建立楔形梁包含轴力和剪切变形效应的平衡微分方程。
In this paper, the equilibrium differential equation including the effects of constant axial force and shear deformation was established for tapered beams.
对弯、剪、轴拉复合受力状态下钢筋混凝土梁的承载能力进行试验研究。
Relatively comprehensive test study on the strength capacity of the reinforced concrete beam under bending moment, shear force and axial tensile force was carried out.
墙体的水平荷载试验以及梁的沿强轴的弯曲试验结果表明,它们吸收能量的能力都是强的。
Horizontal loading tests of walls and bending tests of beams along their strong axes reveal that the energy-absorbing capacities of both are high.
考虑梁的几何非线性动力问题,研究了其动力分析中剪力和轴力相互影响的重要性,提出了剪力和轴力的相互影响是考虑系统非线性影响的关。
A geometric nonlinear dynamic analysis of beam is presented and the importance of interaction of shearing and axial forces in nonlinear dynamic analysis is investigated.
采用DQ法分析了轴力影响不可忽略时简支梁的静力问题。
This paper analyses the static problem of the simply-supported beam with DQ method in case when the axial force cannot be neglected.
由于曲率的影响,曲线梁在其曲率平面内弯曲时的中性轴不通过横截面的形心。因此弯矩在形心处要引起正应力,从而引出所谓“等效轴力”的概念。
When a curved beam is bending in the plane of the curvature, the neutral axis of cross section is not identical with the axis of gravity due to the influence of the initial curvature.
主要在弹性支承连续梁临界轴力求解方法的基础上。提出自锚式悬索桥主梁临界轴力的实用简化计算方法。
Based on the method of calculating the elastic support continuous beam bridge's steady, a practical and simplified method is provided to analyze girder's stability in plane.
由于这类轴具有较小的长径比,因此,在分析它的振动时,采用铁木辛柯梁理论比欧拉梁理论更为合适。
Because of the smaller ratio of slenderness, the theory of Timoshenko beam is more suitable than Bernoulli-Euler beam's for analysis of the dynamic behavior of stepped shaft.
轴压比对节点的抗震性能有利,它可以提高节点的初裂荷载、抗剪承载力、减小节点中梁筋的粘结滑移量。
Axial compressive ratio is advantageous to seismic behavior of staggered joints. It can improve joints first crashing loads, shear resistance capacity and reduce the sliding displacement of beam bars.
对于截面形式较复杂的T形梁,提出了有关的参数计算式,仍可利用图表,通过简单迭代过程,求得T形截面开裂后的中和轴位置。
With the help of some formulae and simple iteration procedures the table and the diagram mentioned above can also be used for locating neutral axis of t beams.
楼板和钢梁构成的组合梁将钢框架和核心筒连接起来迫使其协同工作,在组合梁内将产生反复轴力作用。
The steel frame and core tube are connected by composite beams to work together, and repeated axial forces would be created within the composite beams.
楼板和钢梁构成的组合梁将钢框架和核心筒连接起来迫使其协同工作,在组合梁内将产生反复轴力作用。
The steel frame and core tube are connected by composite beams to work together, and repeated axial forces would be created within the composite beams.
应用推荐