采用本工艺可以生产圆锥滚子轴承外圈。
This technology can be used for producing taper roller bearings.
以二代轮毂轴承外圈锻造为例进行模拟分析。
As an example, the forging of the second-generation hub bearing outer-ring is analyzed.
压力球轴承外圈有平面座型、调心座型和带调心垫圈座型。
Pressure on the ball bearing outer ring with a flat seat type, aligning seat type and seat type with a self-aligning washers.
介绍一种有内圈和无内圈的滚针轴承外圈组件互换的方法。
An interchangeable method of outer ring assembly of needle roller bearings with or without inner rings is introduced in this paper.
外球面球轴承外圈一般带油槽，也生产外圈无油槽的产品。
Usually, the outer ring of the tl bearings has grease groove, bearings having no grease groove are to be provided, too.
磁电机轴承外圈与内圈只有单面相连，因而拆卸方便，利于安装。
Since the outer ring has a shoulder on only one side, the outer ring may be removed. This is often advantageous for mounting.
轴承外圈上设有止动槽，以便装上止动圈，因此轴承的安装较方便。
There is a snap groove in the outer ring for fitting a snap ring, so it is convenient to assemble the bearing.
该类轴承外圈滚道是球面形，故其调心性能良好，能补偿同轴度误差。
This kind of bearing outer ring raceway is spherical shape, so the self-aligning good performance, to compensate concentricity error.
航空轴承外圈的疲劳裂纹分析表明，套圈表面的残余压应力分布致使轴承表面接触疲劳寿命降低。
The analysis on fatigue cracks of the outer race of aero-bearing shows that the distribution of residual tensile stress on race surface could reduce its contact fatigue life.
实验结果表明，该方法中参数变化量的2 -范数会发生突变，能检测出齿轮磨损和轴承外圈剥落的故障。
And two kinds of faults that peeling off the bearing outer ring and gear wear are analyzed. Results show that their 2-norm of model parameters change for two failures happened mutation.
本文以双沟轴承外圈为研究对象，从理论、数值模拟和实验角度对双沟轴承套圈冷辗扩成型基本规律进行了深入研究。
So this paper is related to the study of basic forming principles of cold rolling for double groove ball bearing outer rings from theory, numerical simulation and experiment.
对比了该轴承外圈早期故障和晚期故障的振动信号的小波包分解结果，证明了小波包方法诊断滚动轴承早期故障的有效性。
Comparison of the bearing "s early fault and late fault vibration signal decomposed results, proves that WPT diagnosis method used in incipient rolling element bearing fault is effective."
本文对高速切入磨削轴承外圈沟道所产生的烧伤现象进行分析和探讨，并提出了具体的解决方法，在实践中取得了良好的效果。
This paper analyses the burn problem produced from highspeed crush grinding of the bearing outer ring raceway. And a solution is presented, then good results are achieved by practical application.
提出了通过在装有一个磁化钢球的轴承外圈及保持架侧面配置霍尔传感器，测量钢球三维运动的新方法，阐述了该测试方法的基本原理；
A new method for measuring the 3D motion of balls in angular contact ball bearings fitted with a magnetized ball is proposed, in which Hall Sensor is fixed to its outer ring and cage side face.
提出在传统保护轴承外圈加弹性环来提高其在主动磁悬浮轴承(activemagneticbearing,AMB)系统中的工作性能。
A new type catcher bearing with an elastic ring is proposed to enhance its working performance in active magnetic bearing (AMB) system.
这些类型的轴承还具有两个内圈，但只有一个外圈法兰法兰。
These bearing types also feature two flanges on the inner ring but only one flange on the outer ring.
外部直径，外圈的宽度和轴座直径相同的尺寸标准的球面滚子轴承范围。
The outside diameter, outer ring width and shaft seat diameter are identical to the dimensions of the standard spherical roller bearings range.
球面滚子轴承是双列，自我包含的单位，包括坚实的外圈与凹面滚，固体和内圈与辊每桶笼。
Spherical roller bearings are double-row, self-containing units that comprise solid outer rings with a concave raceway, solid inner rings and barrel rollers with cages.
但是外圈只有一个轴肩，所以轴承可以拆开。
The outer ring, however, has only one shoulder , so the bearing can be taken apart .
双方的这种类型的轴承内圈和外圈的滚道是由一组与接触角。
The raceways of both the inner and outer rings of this bearing type are made with a set contact Angle.
双向压力球轴承有安装于轴上的中间圈和两个外圈，在中间圈与外圈之间分别加有钢球，能够承受双向轴向负荷。
Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
在这种情况下接触球只在某个时候，内圈和外圈，作为一个受压单列角接触球轴承。
Under such conditions the balls contact the inner and outer rings only at one point, as in an axially loaded single-row angular contact ball bearing.
像自调心球轴承和球面滚子轴承，他们提供了一个球形外圈滚道。
Like self-aligning ball bearings and spherical roller bearings, they are provided with a spherical outer-ring raceway.
圆锥滚子轴承有圆锥形内圈和外圈滚道，圆锥滚子排列在两者之间。
Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged.
通过对轴承结构中的滚子尺寸、滚子数量、外圈滚道直径、止动槽直径公差及有效壁厚的改进，提高其使用的可靠性。
By the way of improving roller dimensions, roller number, outer roller path diameter, stop groove diameter and the effective thickness, the using reliability of the bearing is advanced.
座高：整套轴承的总宽度；参考内外圈尺寸，外径，内径以及滚子。
STAND: Overall width of the assembled bearing; refers to the combination of sizes of the cone, outer diameter, cup, inner diameter, and roller.
不带法兰的滚针轴承是可分离的，即外圈、滚针和保持架组件以及内圈都可分别安装。
The needle roller bearings without flanges are separable, i. E. The outer ring, the needle roller and cage assembly and the inner ring can all be mounted separately.
二条滚道的内圈和滚道为球面的外圈之间，装配有鼓形滚子的轴承。
Two groove of the inner ring and outer ring groove for the ball between the form of a drum, equipped with roller bearings.
外圈：轴承组件的四个基本组件之一，也称作外滚道；内圈装配在外圈里。
Cup: one of four basic components of the assembled bearing. Also referred to as the outer race; the cone assembly fits into the cup.
在对深沟球轴承几何参数及接触应力分析的基础上，给出了沟曲率半径系数的控制方程，并对轻、中、重系列轴承的外圈沟曲率半径系数的选取进行了探讨。
Based on the analysis of geometry parameters and contact stresses of the deep groove ball bearings, the control equation of groove curvature radius has been drawn out.
应用推荐