根据这三个关系式预测韧脆转化曲线的具体步骤为：1．对约束参数A_2进行分析，确定A_2的值；
The procedure to predict the DBT curve is given in detail: 1. analylize the parameter A_2 of non-standard specimens and specify its value;
通过建立在特定涡轮机上的功率曲线，这种特定位置风速的预估结果，就可以被转化成电流产生量的评估值。
The resulting estimate for wind speed in a particular location can then be converted into an estimate of electricity generation using a power curve, based on the capabilities of specific turbines.
这种电脑驱动系统缺少足够的马力将曲线转化为位图输出。
These computer-driven systems lacked the horsepower to turn curves into bitmapped output.
通过对某电涡流位移传感器位移、电压用多项式拟合曲线的特点进行分析，经过试探发现该传感器曲线可转化为直线。
The curve of an eddy current displace sensor can be converted into a line by analysing the character of the curve obtained by polynomial fitting.
将基于曲面的干涉处理转化为基于曲线的干涉处理。
The treatment to interference between surfaces is converted to that between curves so that the calculation is made simplified and stable.
提出利用循环阳极极化曲线研究转化膜耐腐蚀性能的方法。
A new method for studying corrosion resistance of conversion films was developed with cyclic anodic polarization curves in this paper.
基于区间分段思想，将极化曲线非线性参数辨识转化为两个线性最小二乘辨识子问题。
The nonlinear parameter identification of fuel cell polarization curve was converted into two sub-problems of linear least square identification based on interval segmentation technique.
试验表明，升温曲线控制对转化率的影响较大，必须规范和统一。
It was revealed by the experiment that the heating curve control affected the conversion rate largely, therefore it must be standardized and unified.
本文建立了一种特殊的第一型曲面积分与第一型曲线积分的转化公式，并通过实例表明该方法在解决问题时所带来的方便。
This paper gives the conversion formula from the first type surface integral to the first type curvilineal, and sets a example of using the method to solve exercises.
在讲课中，要介绍同馀数问题，以及它如何转化成椭圆曲线问题。
In your lecture, I ask you to introduce the congruent number problem, and show exactly how it translates into a problem about elliptic curves.
通过比较煤焦脱灰前后热重燃烧曲线的特征参数的变化和转化速率的快慢，分析了内在矿物质对煤焦燃烧特性的影响。
The effect of included minerals on char combustion characteristics were analyzed by comparing burning curves and their characteristics indexes of the four chars and their demineralized chars.
采用凝胶转化率曲线法和表干时间法，从MI的结构和浓度、活性稀释剂、助剂和树脂等方面对MI引发的光固化进行了研究。
The effects of MI structure and concentration, reactive diluents, additives and resins on photo curing initiated by MI were studied by the gel conversion and photo-curing rate.
选择强度相位的转换曲线，将输入图像的强度信息转化成伪相位信息，并显示在滤波器上。
The pseud phase distribution, which is translated from intensity distribution of the image by a conversion rule, is shown on this given filter.
利用图像处理技术将测井曲线和地质参数转化为图像模式，由神经网络自动提取和记忆曲线所表征的小层模式特征。
Logging curves and stratum parameters are changed to image pattern by image process technology. Neural networks are introduced to extract and remember pattern character of curves automatically.
该算法将曲面问题转化为一个曲线拟合问题和一个曲线插值问题。
A data fusion algorithm for sample set transforms surface problem into a curve fitting problem and a curve interpolation problem.
原子力显微镜测定的力曲线需转化为力位移曲线来应用。
Force curve measured by Atomic force Microscope needs to be converted into force-displacement curve for application.
正是这种细微的结构和组成差异转化为我们看见的弯曲线。
These tiny structural and compositional differences translate into the curved lines we see.
提出了一种自平衡试桩结果转化成传统静载试验曲线的解析法。
An analytical solution transformation method (ASTM) of transforming the data of the O-cell pile testing method into the conventional load-settlement is put forward.
所得的载荷和延伸率都被转化成了真实应力-应变曲线。
Measured loads and elongations were converted to true stress-true strain curves.
基于所建立的理论，可以将给定轮廓曲线的DCSS图象或CSS图象转化为一种树形结构图，并据此检测曲线上的角点。
Based on the established theories, the DCSS or CSS image for a given contour curve is transformed into a tree organization, and then corners on the curve are detected in a multiscale sense.
在建立了由DTA曲线求取任一时刻转化率和反应速度方法的基础上，求得动力学参数。
Based on the methods for calculating directly the conversion and reaction rate at any time from a DTA curve, the kinetic parameters of gasification are obtained.
建立反应混合物转化率与凝胶渗透色谱（GPC）谱图峰面积的标准曲线，采用GPC测定反应混合物转化率和聚合物的分子量及分布。
The thesis includes the following aspects:Based on the calibration curve established, the conversion data of reaction mixtures were determined by Gel Permeation Chromatography (GPC) method.
该方法将材料的S -N曲线转化为零构件的S - N曲线，使之计算结果更接近于实际零构件的使用寿命。
This method converted the S-N curve of material into the S-N curve of the construction member so that it made the computation more closely to the practical service life of the construction member.
作者提出了将鞋楦的复杂空间曲面问题转化为多个较简单的曲线问题来解决的基本思路。
The author put forward the basic thought that transfer shoelast complex space surface problem to several simpler curve problem to solve.
用化学法测定了LIPN生成反映的转化率-时间曲线；
The curve of reaction conversion of LIPN formation versus time was determined by chemical method;
建立数学模型对催化转化器起燃温度特性曲线进行模拟，模拟结果与实验测量结果吻合较好。
A mathematical model was established to simulate the light-off performance of a catalytic converter. Simulation results and the experimental values are agreed well.
建立数学模型对催化转化器起燃温度特性曲线进行模拟，模拟结果与实验测量结果吻合较好。
A mathematical model was established to simulate the light-off performance of a catalytic converter. Simulation results and the experimental values are agreed well.
应用推荐