良好的电极丝动态性能是高速走丝多次切割加工的基础。
A good dynamic stability is the basis of multiple cut on machine tool of WEDM with high wire travelling speed.
实验结果表明，新型走丝系统实现了电极丝的恒张力控制。
Experimental results show that the wire winding system can realize constant wire tension control.
第三类中速走丝电火花线切割机床，准确地应该叫“多速走丝”。
The third type of wire walking speed WEDM and accurately should be called "multi-speed wire walk."
阐述了高低双速走丝电火花线切割机的设计概念、实现方式和特点。
The design concept, realizing way and characteristics of high-low traveling speed WEDM were expounded and the advantages of high speed WEDM and low speed WEDM were integrated.
通过理论和数值分析，阐述了高速走丝电火花线切割机电极丝的振动情况。
By theory and numerical analysis, expounded the vibration of wire electrode of HSWEDM machine tool.
KX系列中走丝系统所集成的控制柜，采用流行的模块化设计，简单明了。
KX series integration go wire control system cabinets, the modular design of the popular, simple and clear.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM. It is appeared before wire broken.
研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
由于慢走丝线切割的走丝速度较慢，电极丝的抖动也较小，能适合大锥度的切割加工。
Because walks silk thread cutting to walk the silk speed slowly to be slow, the electrode silk's vibration is also small, can suit the big taper the cutting processing.
根据中走丝机的机床精度、工艺效果及应用成本，论述了中走丝机具有良好的应用前景。
According to machine accuracy, process effect and application cost of middle-speed WEDM machine, discussed on a good application prospect of middle-speed WEDM machine.
低速走丝电火花线切割机走丝系统是否能稳定运行，直接影响着加工精度和加工表面质量。
Whether the wire winding system of LSWEDM(low speed wire electrical discharge machine) can run stably directly affects the machining accuracy and machining surface quality.
通过辅助电极利用高速走丝电火花线切割加工的方法对绝缘陶瓷氮化硅作了加工实验研究。
This paper investigates the high speed wire electrical-discharge machining (HSWEDM) of Si3N4-based ceramics by assisting electrode method.
应当对高速走丝电火花线切割的各个方面综合治理，才能在提高加工精度上取得突破性成果。
Only by tackling the problems concerning various aspects in a comprehensive way can we gain the breakthrough in raising the machining accuracy of WEDM with high wire-travelling speed.
而即使是现在，我们也继续深化技术，要把KX系列中走丝系统，提升达到慢走丝的控制要求。
And even now, we also continue to deepen the technology, it is necessary to take the KX series wire system, to enhance the control of silk meet the requirements of walking.
叙述了在使用低速走丝电火花线切割机床加工精密模具时，一些常用的加工工艺技巧及编程方法。
Some commonly used machining process skill and programming method were introduced when using low speed WEDM machine to machine precision mold.
因此，本论文从实际工程应用的角度来开发低速走丝电火花线切割微机编程软件，是具有现实意义的。
So, from the point of practical engineering application, it is of great realistic significance for this theme to develop software for computer programming of wire electrical discharge machining.
随着对产品性能和加工精度要求的不断提高，低速走丝电火花线切割加工在机械加工领域中的地位日益突出。
With the improvement of product performance and accuracy of machining, LS-WEDM has increasingly played an important role in the field of mechanical machining.
而往复走丝电火花线切割加工是我国基于本国国情自行研发并普遍应用的经济高效型电火花线切割加工方式。
Reciprocating feed WEDM, which consumes less time and wire electrode, is independently developed machining method originated according to China's national condition.
但与低速走丝电火花线切割机床相比，它在加工精度、可靠性、稳定性以及自动化程度等方面还存在明显差距。
But there are still significant gaps in the machining accuracy, reliability; stability and the degree of automation go with the low-speed WEDM.
因为采用6轴数控系统的框架，使得我们的中走丝专用控制系统在做复杂加工时依然保持高速、均速、决不抖动。
Because the use of 6-axis CNC system framework, allows us to take the wire in the dedicated control system to do complex processing remains a high-speed, all-speed, not jitter.
针对高速走丝线切割机易断丝的问题，详细地分析了钼丝易断的原因和解决方法，并在实践中取得了令人满意的效果。
Molybdenum wire of HS WEDM is easily broken. For solving this problem, the causes and dealing methods are present in this paper, which have a satisfactory effective in practice.
慢速走丝线切割加工技术在高精度模具制造、成形电极丝加工、难加工材料和精密复杂零件的加工中占有重要的地位。
LS-WEDM plays an important role in the field of high-precision mould manufacture, shaped tool machining, hard-machined material and the machine of precise complex part.
本文详细分析总结了现有低速走丝电火花线切割机走丝系统的组成、功能及原理，在分析现状的基础上，指出了其应用及发展趋势。
This paper studies a re-usable simulating system for WEDM machine tools, it can be used in the numerical control systems or auto-programming systems of various kinds of WEDM machine tools.
研究了高速走丝电火花线切割加工中切割效率、表面粗糙度、表面微观形貌的变化，指出采用切割效率作为工作液失效的表征更为直观和准确。
The changes of cutting speed, surface roughness and surface topography were researched. Adopting cutting speed as characterization of cooling liquid failure is more intuitive and accurate.
分析了高速走丝线切割机使用重锤式恒张力机构存在的缺点，并详细阐述了两种新型的双贮丝筒恒张力控制装置是如何实现电极丝恒张力控制的。
The paper have analysis on the defect of HSWEDM which use gravity takeup. Detail analysis have been made on two new kind constant tension system of double canisters how to achieve constant tension.
在每一次灾难面前他们都分道扬镳，每个人走自己的路；他们有人类的怜悯和仁慈，却没有一丝一毫的集体精神。
At every touch of adversity they fellapart, each on his own; there was human pity and kindness, but not a trace ofcommunity spirit.
露丝仍然充满着力量，她冷静而有自信地扶着朱蒂前进，本该是朱蒂搀着她走的。
Still full of energy, calm and confident, Ruth held on to Judy, for Judy's sake, not hers.
实际上我也在车上准备了比如千斤顶及备份保险丝，而且在油料不足一加仑时少走陡坡路。
And on a practical level as well, what with the fact that I carry things like a jack and extra fuses in my own car, and know enough not to park on a steep incline with less than a gallon of fuel.
实际上我也在车上准备了比如千斤顶及备份保险丝，而且在油料不足一加仑时少走陡坡路。
And on a practical level as well, what with the fact that I carry things like a jack and extra fuses in my own car, and know enough not to park on a steep incline with less than a gallon of fuel.
应用推荐