提出了简单实用的顶板静压计算模型与方法。
A simple and useful method for calculating the static roof pressure has also been disscussed.
进行了数值分析，并与试验结果进行了比较，验证了本文提出的计算模型与方法的正确性。
Validity of the computational model and method is verified through comparison between the results of the shaking table test and numerical analysis.
对于天然丝，他们的研究方法采用计算机模型，来帮助确定使天然丝材料具有卓越力学特性的分子与原子机制。
With silk, that means using computer models that help determine the molecular and atomic mechanisms responsible for the material's remarkable mechanical properties.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
本文讨论水力计算与GIS的集成方法，并提出了模型网络生成算法和流量归结算法。
This paper discusses the integration of hydraulic calculation and GIS, and then brings up the model network creation algorithm and the flux induction algorithm.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
Mathematics model is established, and verified by the imitation of computer. The results show that the method can effectively improve the accuracy and reliability of the position.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
A mathematical model is established and validated with computer imitation. The results show that the method can effectively improve accuracy of object position and reliability.
根据数学模型及助力特性特点，提出了计算任意车速下转向盘转矩与电机助力转矩非线性关系的方法。
Based on the mathematics model and the assist characteristic, the arithmetic to calculate the nonlinear relationship between steering wheel torque and motor torque at any vehicle speed is worked out.
本文目的就是要建立一套适合于水轮机转轮叶片刚强度与振动的分析模型和计算方法。
This thesis aims at developing a model and calculation method of rigidity, strength and vibration of the blade .
通过算例，证明本文提出的力学模型与计算方法的合理性与有效性。
The computation examples prove the reasonableness and effectiveness of the mechanical model and the computational methods presented in the paper.
研究表明，该预测模型概念清晰、计算简单，具有较好的合理性与实用性，是一种较为精细的预测方法。
The study shows that this prediction model has features of clear concept, simple calculation and better reasonability and practicability, is a fine prediction method.
分析结果表明，钢结构节点响应互信息量相关性方法能有效地反映计算模型与实际结构的相关程度。
The results indicate that the method of node response mutual information can reflect the correlativity between the computational model and the actual structure effectively.
本文采用理论计算与模型试验相结合的研究方法。
The study method is to combine theory calculation with model test.
文章介绍了高精度重力场关联维的计算方法，并给出了模型与实际资料的试算结果。
The paper introduces the calculation method of the associative dimension for high-precision gravity field. The trial computation results of models and real data are also given.
还将上述方法与均匀界面层模型进行了比较，计算结果表明，界面层的性质对复合材料有效性质和局部应力的分布有着重要影响。
The computed results show that the presence of an interphase can have an important influence on the effective property and local stress distribution of the composites.
提出了求解道岔转辙器部分轮载的分布规律及结构不平顺的力学模型与计算方法。
In this paper, the mechanical models and calculation method are advanced for calculating the variation regularity of wheel load and the structure irregularity of the switch proper of turnout.
采用神经网络与遗传算法相结合的方法，用黑箱模型计算催化精馏过程，并进行了全局优化；
A method, which combined neural network and genetic algorithms, was employed to simulate the catalytic distillation process by black box model and optimize the operational parameters.
与传统的连续模型和随机振动理论计算涡激响应方法相比，具有更高的适应性。
The proposed approach is shown to be more flexible than the traditional methods adopting continuous models or stochastic approaches.
目前已经有多种基于物理的软体模型模拟算法，但计算量大与算法复杂是这些方法的主要缺陷。
There are multi-kind simulation methods of soft body modeling based on physics, but huge computation and complex algorithm are the limitations of these methods.
为减小长周期反应谱的计算误差，本文提出一个计算长周期反应谱的转换模型和与之相应的精确计算方法。
The transition model and relevant precise method for calculation of the long period portion of response spectrum is proposed to reduce the calculating errors.
给出了PIC法的计算方法，指出PIC法必须与蒙特卡罗碰撞(MCC)模型和鞘层模型相结合，才能更准确地对ICPS进行模拟。
Calculation method of PIC is given. We suggest that only when PIC is combined with Monte Carlo collision (MCC) and sheath model, can it more precisely simulate ICPS.
这一信息模型可方便地采用面向对象的方法在计算机中描述与表达。
The new model can be represented simply and efficiently in computer software by an object oriented method.
理论计算和实际测试结果的比对表明，本文提出的动态力学模型与实际情况较接近，计算公式和计算方法正确，测试结果可信。
Compared calculation with practice test, this paper puts forward the dynamic mechanics modal which near the practice condition, right calculate formula and method and creditable test result.
对若干塔的热力性能计算分析表明，采用本文的数学模型与计算方法所开发的计算程序具有良好的工程应用前景。
Thermal performance analysis of a number of towers shows that this mathematic model and its calculation programme are perspective in technical applications.
建立了数据处理的数学模型和误差计算方法，为空间凸轮廓面检测与误差计算提供了新方法。
This method realizes the measure of the practical profile of the spatial CAM and establishes the mathematical model and error calculate method.
本文在遥感技术系统分析的基础上，给出了一个效益分析模型与相应的一些计算方法。
Based on Systematic analysis of Remote Sensing techniques, a benefit analysis model and its calculative methods are presented in this paper.
分析传递函数与FOG模型的误差，得出数字闭环FOG频率特性的计算方法。
Frequency characteristics calculation of the digital closed loop FOG was conducted based on error analysis between the transfer function and the model.
这一模型非常适合用户与入侵检测系统间的信任研究，并根据用户可信模型及入侵检测系统原理提出了用户可信度的计算方法。
This model researches fitly the trust relation between user and IDS, and the computing means of the user trust degree is presented on the basis of the user trust model and the principle of IDS.
建立了发动机实体和有限元模型，介绍了计算模态分析和模态相关性分析的一般方法与理论。
The method of the calculated modal analysis and the modal correlation is introduced, and the geometrical model and finite element model are established.
建立了发动机实体和有限元模型，介绍了计算模态分析和模态相关性分析的一般方法与理论。
The method of the calculated modal analysis and the modal correlation is introduced, and the geometrical model and finite element model are established.
应用推荐