作者论述谨以平推流反应器为代表，但其方法不失通用性，可望在反应器热量衡算中广泛应用。
Although only heat balance of plug flow reactor was discussed in this article, the method could be applied in other types of reactors.
通过物料衡算对设备进行选型。
从热量衡算可以得到固体颗粒任何时候的温度。
给出了氨吸收制冷过程模拟和物料及热衡算的模型。
A simulation model of ammonia absorption refrigeration process involving material and heat balance is given.
通过工艺参数和工艺流程进行物料衡算、热量衡算；
The material balance, heat balance have been calculated respectively with the technical parameters and procedures to get the relevant feed and heat supply.
气化过程的物料衡算可以用来预测气化煤气的基本组成。
通过动量、能量和质量衡算的方法可以建立其基本的计算式。
The basic calculation will be defined on the basis of dynamic momentum, energy and mass equilibrium accounting.
针对散料核设施，提供了一个核材料衡算和MUF评价的方法。
For the bulk handling facilities, a method of the nuclear material accounting and the material Unaccounted For (MUF) evaluation is given in this paper.
在物热衡算基础上，对该系统的设备进行了校核，均能满足生产需要。
Based on material balance and heat balance, the system equipment are examined and proved suitable to the need of production.
模型包括了物料衡算、相平衡计算、传质面积计算、传质速率计算等。
The model includes the calculation of material balance, the vapor and liquid equilibrium compositions, the interfacial area of mass transfer, mass transfer rate.
污水过滤过程的数学模型包括固体滤料相和液体污水相的物料衡算方程。
Filtered process mathematical model includes material balance equations of solid filter material and liquid sewage respectively.
对循环过程进行了水平衡、热量衡算和经济分析，证明了该工艺的可行性。
The calculation of water balance, heat balance and the economic analysis of the close recycle technology have been also conducted, showing that the technology is feasible.
通过动量衡算及能量衡算方法分析并计算了直管内变质量流体流动的流量分配。
Distribution of flow volume for unsteady mass flow in the straight pipe was analyzed and modeled by means of momentum balance and energy balance.
对气升式反应器进行总的能量衡算，从理论上得到计算液体循环速度的解析式。
This paper obtained mathematic model able to calculate liquid circulation velocity with total energy balance for airlift reactor.
将吸附速率方程、吸附等温方程与物料衡算相结合预测了其他条件下的穿透曲线。
The breakthrough curve inside the bed under another operation is predicted by the adsorption rate equation, the adsorption isotherm equation and the material balance equation.
本文根据对流干燥过程能量衡算方程序，对干燥过程的节能措施进行了理论分析。
In this paper, the steps of energy saving on convective drying process are analyzed based on the energy calculation equation.
将吸附带以某一虚拟速度运动，通过物料衡算可以建立固定床吸附操作模型方程。
Supposing adsorption belt moves at a suppositional rate, the adsorption model equation in fixed bed can be set up through material calculation.
主要对SJ型低温干馏炉生产半焦的过程进行了物料、热量衡算及过程能耗分析。
It's mainly analyzed that the material balance, heat balance calculation and energy consumption of the production process of semi-coke by SJ-low-temperature carbonization furnace.
应用平衡常数法、物料衡算和热量衡算，建立了直流法克劳斯硫磺回收工艺的计算模型。
Using the equilibrium constant method, the thermal and material balance calculation, and has set up the calculation model of straight Claus sulfur recovery process.
结果表明，在约束条件下，该数学模型具有较好的适用性，其衡算结果与实验结果相吻合。
The results showed that the mathematical model had fairly good applicability under fixed conditions, and the calculated results was coincident with the experimental data.
其次，热量衡算时，将标准状态下单质的焓定义为所有组分的基准焓，不再需要反应热数据。
Secondly, the enthalpy of elementary substance under standard state is defined as the criterion of component enthalpy, thus reaction heat is no longer needed in energy balance.
通过物料衡算和线性规划方法建立了进行代谢流分析的数学模型，并首次应用于批式培养过程。
An improved mathematical model of metabolic flux analysis by material balances and linear programming method was established, which was first applied to batch culture process in this paper.
建立了纤维湿热表面涂覆的数学模型及衡算方程，讨论了其在项目设计和工程应用中的适应性。
The mathematical model and calculation equations of wet-heat surface coating for fibers was established. The applicability of the model was discussed for project design and engineering application.
对加氢处理、加氢裂化、延迟焦化、溶剂脱沥青和催化裂化等主要加工过程的硫分布进行了衡算。
Sulfur distributions have been calculated for several main processes such as hydrotreating, hydrocracking, delayed coking, solvent deasphalting, and FCC etc.
基于物料衡算、热量衡算和反应动力学建立的催化裂化过程动态模型是具有非线性、分布参数的模型形式。
Based on the material balance, energy balance and reaction kinetics, a dynamic model, having the form of a nonlinear distributed parameter has been presented for catalytic cracking process.
对反应注射成型机所采用的碰撞混合器进行分析，并就其进料喷嘴及混合室中的物料流动进行了能量及动量衡算。
The balance calculations were carried out of energy and momentum of reactant flows in an impingement mixing unit used for reaction injection molding.
采用混合二甲苯二组分物系的固液相平衡方程及物料衡算和热量衡算方程对混合二甲苯连续悬浮结晶工艺进行模拟计算。
The continuous suspension crystallization process for xylene separation was optimized by calculation of solid-liquid phase equilibrium, material balance and energy balance.
根据质量衡算原理，建立了基于微分床萃取的超临界流体萃取的动力学数学模型，从理论上分析了超临界流体萃取的传质过程。
According to the principle of mass conservation, the kinetic model of SCFE is set up founded on differential extraction, and the mass transfer in SCFE is analyzed.
根据质量衡算原理，建立了基于微分床萃取的超临界流体萃取的动力学数学模型，从理论上分析了超临界流体萃取的传质过程。
According to the principle of mass conservation, the kinetic model of SCFE is set up founded on differential extraction, and the mass transfer in SCFE is analyzed.
应用推荐