开发了一种超声电火花线切割复合加工装置。
A new kind of device has been developed, by which hybrid technology of ultrasonic and WEDM is performed.
本文介绍了电火花线切割机床的微机控制系统的设计与实现；
This article introduces the design and realization of the control system for electrical spark linear incising machine tool.
分析了电火花线切割机断丝原因，并相应地提出了解决方法。
This article analyzes the reason for broken wire in electric spark cutting machine and puts forward some solution.
慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。
Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.
电火花线切割加工的表面粗糙度是衡量加工质量的重要指标之一。
The surface roughness in the wire cut of electric discharge machine work is one of the important parameters to measure the work performance.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
高士集团是世界上最大的工业用缝纫线及锈花线制造商和供应商之一。
Coats is the world's largest manufacturer and supplier of industrial sewing and embroidery threads.
文章介绍了用于电火花线切割机床连续轨迹式数字程序控制的射流装置。
In this paper a fluidics device of continuous-path numerical control system for electrical spark machine tool is presented.
为了提高电火花线切割机电极丝运动的平稳性，通常需要对其施加张紧力。
In order to improve the movement stability of the WEDM machine tool, the tension force is usually applied to the wire electrode.
通过理论和数值分析，阐述了高速走丝电火花线切割机电极丝的振动情况。
By theory and numerical analysis, expounded the vibration of wire electrode of HSWEDM machine tool.
主要介绍了当前慢走丝电火花线切割脉冲电源的研究现状和新的发展趋势。
The paper introduces the research status and the new trend in development of pulse generator for LSWEDM.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
用光学显微镜观测和分析电火花线切割硅表面沿纵向分层择优腐蚀后的形貌；
The surface morphology after preferential corrosion along the vertical orientation was observed via an optical microscope.
本文进行了电加工中的磁力电解抛光和干式电火花线切割两方面内容的研究。
WE study two areas of the electro-machining: the magnetic force electrolysis polishing and the dry-type WEDM.
气中电火花线切割加工技术是近几年出现的一种新技术，它采用气体作为介质。
WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM.
皇冠式的天花线板，提高面板的室内门，和设计师选择的照明灯具及内嵌式照明。
Crown Molding, Raised panel interior doors, and Designer selected Lighting Fixtures and recessed can lights.
研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
探讨在电火花线切割得到广泛应用的背景下，电火花线切割数控编程的手段和方法。
The article discusses the means and method of numerical control programming under the background that spark erosion wire cutting is applied extensively.
电火花线切割加工精度，主要指尺寸精度、形状精度、位置精度以及加工表面粗糙度。
The machining accuracy of WEDM means mainly the dimensional accuracy, accuracy of form, accuracy of position, and the surface roughness of cut surfaces.
在现代电力电子技术基础上，开发出新型微能可控的微细电火花线切割加工脉冲电源。
Base on power electronic, a newly micro energy controlled pulse generator for MWEDM was developed.
通过对电火花线切割机床在加工过程中的特殊受力分析，给出步进电机的匹配选择方法。
This article introduced the matching selection of step motor for wire-cut electric discharge machine by analyzing the special stress of the machine.
低速走丝电火花线切割机走丝系统是否能稳定运行，直接影响着加工精度和加工表面质量。
Whether the wire winding system of LSWEDM(low speed wire electrical discharge machine) can run stably directly affects the machining accuracy and machining surface quality.
采用一般的脉冲电源对磁钢进行电火花线切割加工，不可避免地将引起充磁，造成排屑困难。
When the method of general pulse power of wire cut EDM is used, magnetic steel has magnetic property inevitably and it is difficult to evacuate.
应当对高速走丝电火花线切割的各个方面综合治理，才能在提高加工精度上取得突破性成果。
Only by tackling the problems concerning various aspects in a comprehensive way can we gain the breakthrough in raising the machining accuracy of WEDM with high wire-travelling speed.
对进一步提高微细电火花线切割加工精度，减少电极丝的损耗，降低加工成本具有一定意义。
The measures and solution for decreasing wire wear are proposed, which are significant to increase the precision of Micro-WEDM process, reduce the wire wear and cost of the machining process.
酒店客房整洁时尚，天花线条装饰配合橘色的背景墙与木地板的边饰遥相呼应，也是心意十足。
Hotel rooms are clean and tidy fashion, smallpox decoration lines with orange background walls and wooden floor edging echoed. Also the mind is dye in the wood.
叙述了在使用低速走丝电火花线切割机床加工精密模具时，一些常用的加工工艺技巧及编程方法。
Some commonly used machining process skill and programming method were introduced when using low speed WEDM machine to machine precision mold.
如在壁面上设计一弧型铁花线条，顶角设计一铁花角饰，它与整个居室相映成趣，活跃了室内氛围。
As in art, design a user spends lines, the design of a vertex Angle spends Kok decorated it with the entire room trying, the revitalization of the indoor atmosphere.
如在壁面上设计一弧型铁花线条，顶角设计一铁花角饰，它与整个居室相映成趣，活跃了室内氛围。
As in art, design a user spends lines, the design of a vertex Angle spends Kok decorated it with the entire room trying, the revitalization of the indoor atmosphere.
应用推荐