指出常用螺纹脱模机构的应用条件及优缺点。
Expound the widely used mold structures of plastic part with thread, explain the requirements of these structures, the advantage and drawback.
该模具采用潜伏浇口型腔板-推杆二级脱模机构。
重点阐述了锥形套注射模结构中脱模机构的设计要点。
Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.
设计了螺纹脱模机构、浇注系统、螺纹转动保险机构和温度控制系统。
Thread demoulding mechanism, injection system, protect mechanism of thread rotation and temperature control system were designed.
通过计算设计了注塑模具的成型结构、 脱模机构、浇注系统等方面。
The design includes the mould structure, the mould cavity, the pour system, and so on.
介绍了一种型芯与推板双锥面配合脱模机构设计，分析了结构特点及制造加工工艺性。
A demoulding structural design by the cooperation of core and dual-cone is introduced, and the structural character and manufacture process are analyzed as well.
脱模机构采用推杆推出塑件的同时带动斜滑块脱出圆弧形凹位，使脱模机构简单实用。
The ejection mechanism used pin ejector to pull the plastic parts out with move slanting slide simultaneously leaving circular arc concave position.
介绍了斜齿轮塑件注射成型模具的齿形型腔旋转式和斜齿轮塑件旋转式两类脱模机构设计。
The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.
机器运行时，严禁将人体任何部位置于安全门和防护罩范围内以及脱模机构伸出所及范围内。
When the machine is running strictly prohibit any part of the body goes into which the emergency door the protection cover and the mold emptier can reach.
介绍了钢球式二次脱模机构的工作过程，并对设计及加工过程中需要注意的一些关键问题进行了阐述。
The working process of steel ball secondary demoulding mechanism is introduced, and the key issues required attention on design and processing are stated.
透明塑料盒盖注射模采用点浇口进料，脱模机构采用推板推出时，增设引气辅助推出机构，可确保制件顺利脱模。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
为保证顺利脱模，模具设计采用了双脱模机构，即定模采用杠杆、推杆顶出机构，动模采用推管二级顶出机构。
As a result, a mould with double stripper mechanism was needed, that is to say, there were levers and ejector pins on the stationary mould half and ejector pipes on the moving mould half.
对带内螺纹的塑料制品及其模具结构进行分析，采用自动卸螺纹和压缩空气二次顶出相结合的结构较紧凑的脱模机构。
The product with inner thread and its mould structures are analyzed. The demoulding structure of automatic thread demoulding and second ejection with compressed air are adopted.
详细介绍热流道模具浇注系统结构设计和尺寸计算、热流道板加热功率计算、热流道板线膨胀量计算及在设计时应注意的一些问题，并介绍了一种二级脱模机构。
The structure design and the calculation of the sizes, heating power, linear swell value of hot runner system were discussed in detail. A two-step demoulding mechanism was also introduced.
该模具消费的制件是长壁制件，脱模后贴在型芯上，推出机构用的是接近制件壁穿型芯的推杆。
The mold of the parts is parts of the wall, after Stripping posted on the core, the agency launched using a wall around parts wear core putt.
通过对一种带有内螺纹的酒瓶盖的结构分析，阐述了采用大导程螺杆和螺母机构实现螺纹型芯自动旋转脱模的设计过程及其工作过程。
Through analyzing of a bottle cover structure with inner thread, a type of screw and nut with coarse pitch was applied to realize thread core demoulding automatically.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.
模具结构中采用了定模强制脱模，顺序开模，滑动型芯延时顶出等机构。
Several mechanisms such as forced stripper, sequenced opening, delayed goring of the sliding core are applied in the design.
在模具内浇注预养好的坯体，由翻转吊装机构将模具整体经空中翻转90度后放置于切割小车上进行脱模。
Mould the base body in the mould, and lay on the cutting trolley for demoulding after turning the cast mould over 90 degree by the upset hoist.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
针对德国DORST公司生产的TPA140型粉末压机的主机构进行分析研究，根据压制曲线和脱模曲线分析了主机构的结构组成和工作原理。
Based on the stroke curve and pattern drawing curve, the structure of main mechanism of TPA140 powder press made by DORST company of Germany is analyzed in this paper.
即采用液压马达和齿轮机构实现机动旋转螺纹脱模，同时采用组合型芯结构实现螺纹和加强筋的成型。
In the mould, hydraulic pressure motor and gear is applied to realize demolding tread thimble, and combinated core is used for the forming of tread and reinforcing tendon.
该机构能减少推动力，可解决结构空间受限制、深度很大制件内部抽芯脱模问题。
It can reduce driving power and resolve the problem of the internal core-pulling about products with the limited space and large deep.
该机采用蜗轮-蜗杆机构、铸模圆盘-脱模顶杆及凸轮轨道、并配有高效冷却水循环处理系统。
This machine is equipped with turbine - screw mechanism, mould casting disk-tripper pin and CAM path, as well as cooled water recycling treatment system.
在塑料模具设计中，设计一种延时脱开机构将机床动力由动模传递给定模，使定模顶出机构工作；在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
In the design of the plastic mould, a latch_lock mechanism was designed to transfer the machine driving force from the moving half to the fixed half to make the ejection system of the fixed half work.
分析了沐浴露瓶盖的工艺特点，介绍了瓶盖注射模的结构及工作过程，并介绍了注射模设计中采用的强制脱模、二次顶出、滑动型芯延时顶出机构等。
And the mechanisms of forced demoulding, two_time ejection and delayed ejection by a sliding core used in the injection mould were introduced.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
The engagement theory of the gear rack mechanism can be used to study the silent chain mechanism.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
The engagement theory of the gear rack mechanism can be used to study the silent chain mechanism.
应用推荐