用途：用作含油轴承、机械结构零件等粉末冶金。
Use: Used in the powder metallurgy of oil-contained bearings and mechanical structure parts.
根据凹模周界尺寸选出压力机和与其相关的结构零件。
Selects the press according to the concave mold border size and the constructional detail which if is connected.
论述了该机构的工作原理及主要结构零件的设计要点。
The working principle of the mechanism and the design on the key components are detailed analyzed.
变值轧制成型技术将成为制造具有变截面形状结构零件的主要方法。
The variable data rolling forming will become the major methods to produce work-piece which has variable section structure.
斜导柱是型腔模具中典型的结构零件，对其实现自动化设计很有必要。
Since the Angle pin is a typical structural part of the mold, it is necessary to design automatically.
铝合金轮毂不仅是摩托车重要的结构零件。而且又是外观件、安全件。
Aluminum alloy wheel is not only the important structural components of motorcycle, but also the appearance of parts, safety parts.
齿轮毛坯材料损耗为70%，而飞机结构零件的材料损耗甚至达90%。
This wastage can be as high as 70% for gear blanks, and even 90% in the case of aircraft structural parts.
锻造生产的零件具有较高的强度重量比，所以常被用在飞机结构零件的设计中。
Forgings yield parts that have high strength to weight ratio, thus are often used in the design of aircraft frame members.
微磨料水射流加工技术正成为制造微细结构零件重要的经济高效的微细加工技术。
Micro abrasive water jet machining (MAJM) is becoming an important machining technique for cost effective micro machining.
悬架橡胶衬套作为悬架重要的承载结构零件，其变形响应特性直接影响到悬架性能。
Suspension rubber bushings being important loaded structure parts on suspension, its deformation response characteristics can influence the suspension performance directly.
为了实现设计重用，提出了一种面向复杂结构零件的初始化设计知识模型构建方法。
To achieve the design reuse of complex structural components, a method for the initialized design knowledge model is investigated.
结果发现，粉冶材料的焊缝不仅具有作为高温材料的很大可能性，而且有潜力用作结构零件。
As a result, it was found that the welds of the powder metallurgy materials have good potential not only for highperformance materials but also for structural Conponents.
分析精冲工艺的成形特点，介绍在通用设备上使用精冲模具以及该模具的主要结构零件和技术参数。
Precision blanking die structures that can be used in forming equipment of general-purpose as well as technology parameters for main structure parts are designed. After experiment, effect is perfect.
除了汽车外装结构零件，GMT也大量应用在汽车非结构内装零件，农机零件及土木结构强化…等。
In addition to Automotive structural exterior parts, GMTs are also widely applied to Automotive non-structural interior parts, Agricultural Machinery, Construction Reinforcement... etc.
迅速理解项目需求和方法，承担机械结构零件和产品的详细设计来满足项目计划的里程碑和关键节点；
Grasp quickly the project requirement and finalize the approach, undertake detailed designs of mechanical parts and final products to meet key milestones and timeline of projects.
针对零件库中复杂结构零件难以分类和检索问题，提出一种基于概念零件结构定性模型的零件设计可重用方法。
Aiming at difficult sorting and retrieving complicated structure parts in part lib, a method for part design by using conceptual part structure qualitative models is presented.
钣金产品中许多结构零件都是采用金属薄板制成的，这种板式结构既可减轻设备的重量，又可降低加工制造的成本。
Many parts are made of sheet metal in sheet metal product, this framework can both decrease the weight of the equipment and reduce the cost of manufacture.
多孔金属零件与标准P/M结构零件不同他们被按以低压，并且也许紧紧捕捉粉末裁减为了达到指定的多孔性要求。
Porous metal parts differ from standard P/M structural parts in that they are pressed at lower pressures and may tight mesh cuts of powder in order to achieve specified porosity requirements.
电子设备中许多结构零件都是采用金属薄板制成的，这种板式结构既可减轻电子设备的质量，又可降低加工制造的成本。
Many parts are made of sheet metal in electric equipment, this framework can both decrease the weight of the electric equipment and reduce the cost of manufacture.
从而说明该气缸的设计符合预计的可靠性要求，其通过有限元方法来对结构零件进行寿命预测是可行的，也是很有必要的。
Which shows that the cylinder is designed to meet the reliability requirements expected, the finite element method for life prediction of structural components is feasible and necessary.
本文介绍了石墨粉的主要特点。说明了石墨粉的特性对粉末冶金结构零件材料性能的影响。最后提出了选用石墨的基本准则。
The main characteristics of graphite powder are introduced with the influence on P/M details performance. The principles of selection are proposed.
赛托斯预想这种材料可以被用作结构材料，用于飞机零件，车辆和航空设备，甚至是日常生活中的手机、笔记本等。
Sottos envisions the materials being used for structural applications such as airplane parts, car and spacecraft components, and for everyday products such as cell-phone and laptop cases.
所以，成功依赖于那些稳固住整体结构不动摇的小工具、小零件。
Success, therefore, depends on the smaller tools, or pieces, that keep structures from tumbling.
这些帖子激起了一系列有关所有可能和不可能实现的数据结构、智能编码和零件编码标准的深入探讨。
These posts sparkled an intensive discussion about all possible and impossible data schemas, intelligent numbers and standards for part numbering.
Fuze能识别并管理你上传的文件，包括零件、装配件和图纸关系，也可以运用其独创的视觉产品结构工具生动地显示这些关系。
Fuze understands and manages the files you post, including part, assembly, and drawing relationships, and can show these relationships graphically with its unique visual product structure tool.
注意：为满足未来的概要文件要求，第四个系统-零件供应商系统可以容易地扩展样本应用程序的体系结构。
Note: a fourth system, the Part Supplier system, can easily extend the architecture of the sample application to address future profile requirements.
结合零件的试制，进行缩口模具的结构设计，并对模具的工作原理、模具主要零件相互关系及其作用做了详细的论述。
Integrated with the trial-produce of the part, the article discusses the structure design, the operating principle, the interrelation and functions of the main parts of the die.
内高压成形零件的强化，以及重量更轻，由于结构的完整性和减少焊接或添加件。
Hydroformed parts are stronger and weigh less due to structural integrity and fewer welds or add-on pieces.
重点介绍了模具结构和工作过程及重要零件的设计。
Further, die structure and working process, as well as critical parts design are mainly introduced.
本文应用多色集合理论建立了零件加工系统的网络结构模型。
The net configuration model of parts machining system is built based on the theory of polychromatic sets.
应用推荐