欧洲刑警组织分析并散发欧盟成员国的信息。
Europol analyses and distributes information from EU member states.
通过熔覆试验和金相组织分析，获得了最佳工艺参数。
The optimal technological parameter was obtained by laser cladding experiment and metallographic structure analysis.
按模块组织分析数据，并列出模块中各个函数的分析数据。
Organizes profiling data by module, and lists profiling data for the functions in the module.
在产业组织研究中，电信产业组织分析是近年来的研究热点。
In the recently research of Industrial Organization, the analysis of telecommunications is a hot field.
对铅黄铜作了深冷处理，并进行力学性能试验和金相组织分析。
The Pb brass has been treated with cryogenic treatment, the mechanical properties testing and microstructure analysis have been done.
通过显微组织分析，找出产生缺陷的原因，从而提高工艺水平。
Some typical microstructures were analyzed, showing up the potential causes in relation with the defects, so as to improve the process level.
最后结合接头显微组织分析了组织因素对接头强度和塑性的影响。
Finally the effects of microstructures on the welds strength and ductility were discussed.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
组织分析发现，未溶碳化物可成为珠光体转变的核心，促进珠光体转变。
The microstructure analyses find that remaining carbide could be a nucleus of pearlite transformation and accelerate pearlite transformation.
没有哪一个单独的问题重要到能够充分满足作为一种组织分析者的指导原则。
No single item is of sufficient importance to suffice as a guiding principle for the organizational analyst.
按模块组织分析数据，并列出模块的函数、内存分配数据和详细计时信息。
Organizes profiling data by module, and lists the functions, memory allocation data, and detailed timing information for the module.
利用计算机对金相组织进行定量分析是金相组织分析中一条重要的研究方向。
Quantitative analysis for metallography structure with computer is a important research direction in analysis for metallography structure.
对唐钢FTSR线生产的T510L汽车大梁钢进行了组织分析和性能测试。
The microstructure and mechanical properties of low C-Mn T510L beam plate produced by FTSR technology in Tangshan Iron and Steel Co.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
针对半固态组织分析中所需的固相率、固相颗粒尺寸和圆整度进行了计算机分析。
The liquid-solid volume rate, grain size, and nodularization of solid particle within the microstructure of semi-solid metal was analyzed.
作者认为，显微组织分析是控制和判断粉末冶金铜—钨触头质量的重要方法之一。
The analyses of microstructure is one of the important methods for controlling and evaluating the qualities of copper-tungsten alloy contactors.
采用电脑多媒体技术配合荧光显微镜，建立了病理组织分析及活细胞荧光示踪系统。
Using the computer multimedia technology and fluorescence microscope, we established the pathology organization analysis and the living cell fluorescence trace system.
通过对焊接接头的力学性能和金相组织分析比较，证明该钢具有良好的焊接适应性。
The tested results show that the steel has good welding adaptability through analyzing the mechanical properties and metallurgical structures of the welded joints.
将原位分析与低倍组织分析结合起来，完整地体现铸坯试样的成分分布和组织特征。
Combined the original position analysis with macrostructure examination, the composition profiles and structure features of the sample taken from continuous casting strand can be fully revealed.
对断裂的金属接骨螺钉进行了化学成分、硬度、显微组织分析及表面加工质量的检测。
The analysis of chemical composition, hardness and microstructure and quality inspection of surface processing have been done to metal bone screw which was fractured in human body.
对开裂的电厂水冷壁管进行了化学成分及金相组织分析，并对断口进行了扫描电镜分析。
The microstructure and chemical composition of cracked water-cooling wall pipe used in power plant were analyzed, and its fracture was analyzed by SEM.
通过金相组织分析，初步摸清铜锌合金快速凝固组织在不同温度下保温组织演变的特点。
By microstructure analysis the evolutive characteristic of structure of rapidly solidified Cu Zn alloy in different temperature preservation was initially made clear.
对不同条件下所得试样的组织分析表明：在加载条件下，镁基块体金属玻璃更容易发生晶化。
Based on the microstructure of samples under different conditions, Mg-based bulk metallic glass is believed to be easier to crystallize under loading.
显微组织分析表明，含钛钢中生成了钛化物相，并且随着退火温度的提高，钛化物析出量增多。
Analysis on the microstructure shows that precipitation of compound containing titanium was found in the steel, and its amount increases with the elevation of annealing temperature.
首先介绍了SEA中的战略一般分析的内容，即战略内容分析，战略过程分析和战略组织分析；
This paper first introduces the general contents of strategy analyses in SEA, that is, the analyses of strategies' content, process and organization.
显微组织分析表明，呋喃树脂砂生产摇枕、侧架所出现的裂纹按照产生原因分为缩裂纹和拉裂纹。
According to microstructure analysis, cracks in bolster and side frame produced by Furan self-cured sand can be classified into shrinkage hot cracks and stress hot cracks.
涂层微观组织分析表明，涂层组织中的微晶和非晶相对涂层的耐磨性和耐腐蚀性都有重要的意义。
It is found that the microcrystals and amorphous phases in the microstructure of the coating play key role in its wear-resistance and corrosion-resistance.
采用化学分析及微观组织分析的方法，对伞骨钢压扁后成型过程中所产生分层缺陷的原因进行分析。
Causes to the laminar defect of the umbrella bone steel occurring in the process of cold forming are analyzed by chemical analysis and microstructure analysis.
采用化学分析及微观组织分析的方法，对伞骨钢压扁后成型过程中所产生分层缺陷的原因进行分析。
Causes to the laminar defect of the umbrella bone steel occurring in the process of cold forming are analyzed by chemical analysis and microstructure analysis.
应用推荐