纯滞后是工业过程中普遍存在的一种现象。
本文探讨了一阶纯滞后系统补偿的一种算法。
An algorithm for the compensation of a first order pure lag system is discussed in this paper.
对象具有较大纯滞后是过程控制的一个难题。
The control of processes having large dead-times is usually difficult.
该方法对于含有纯滞后的对象的控制具有普遍意义。
This method has general significance to control plants those including time delay.
认为该方法能有效克服大纯滞后对控制系统稳定性的影响。
Holds that by this way the influence of the large pure delay on the system stability can be overcome.
属于后者的是气动乘法元件和以长导管构成的近似纯滞后元件。
For the latter, a pneumatic multiplier and an approximate dead-time element using long tu...
介绍了PF C的基本原理，推导了一阶加纯滞后系统PF C算法。
The basic principles of PFC are introduced, and PFC algorithm for first-order plus dead-time system is delivered.
提出了一类基于非自衡加大纯滞后过程的双预测PI控制器的结构形式。
A kind of double predictive PI (DPPI) controller for integrator plus time delay process is proposed.
该系统特别适合那些具有纯滞后特性被控对象的控制，有效抑制系统振荡。
The system is suits the controlled plants with pure delay property especially. It can restrain the oscillation of the system.
针对电阻炉温度被控对象的纯滞后特性，设计了内模pID鲁棒控制器。
The resistance furnace temperature is a time delay system, an internal model PID robust controller is presented in this paper.
衡量过程具有纯滞后的大小通常采用过程纯滞后和过程惯性时间常数之比。
Measure the size of the process is usually higher than with a pure lag time delay process and the process of inertia time constant use.
本文应用GPC（广义预测控制）算法实现对一阶惯性加纯滞后对象的控制。
This paper uses GPC (Generalized Predictive Control) algorithm to control a one-order inertia plant with time delay.
由于电阻炉炉温系统是一个纯滞后大惯性环节，其参数整定与常规对象有所不同。
The parameter design of this system is different from other objects because of its long time delay.
针对圆锥破碎机控制系统的大纯滞后和参数时变的特点，提出了模糊复合控制方法。
According to the property of large and pure lag and parameter time-varying of the cone crusher, the paper puts forward the fuzzy complex control method.
提出了一种大纯滞后系统新预估控制方法，对大纯滞后系统进行了有效的模糊控制。
This paper presents a new predictive control method for time-delay systems with long pure time delay, which effectively solved the control problem of them with fuzzy control.
针对一阶和二阶纯滞后对象，本文提出了一种基于内模结构的仿人智能协调控制方法。
This paper proposed a method of coordinated control of human- like intelligent based on internal model structure for the first- order and second- order plants with time delay.
对大惯性及纯滞后系统的自适应智能开关控制器给出了一种递推梯度形式的控制规律。
A recursive gradient controlling law for adaptive intelligent switch controller of inertial and large dead time system is given in this paper.
由于温度控制系统为纯滞后系统，纯滞后会引起系统的不稳定或降低系统的工作性能。
Because the temperature control system is a pure time delay system which will cause system unstable or reduce work performance.
一阶加纯滞后或二阶加纯滞后，并且提出了时滞系统的模型参考自适应控制的设计方法。
And a design method of model reference adaptive control for system with pure lag is presented.
此控制器比常规控制器调节时间短、响应快，且能有效地消除纯滞后环节所产生的振荡。
The regulation time and response time of the newly developed controller are shorter than those of traditional one. The instability caused by pure lagging effect can be eliminated effectively.
单晶硅晶体生长炉具有非线性和大纯滞后的特点，应用常规pid控制难以实现有效控制。
It is difficult to apply general PID control to the equipment of monocrystalline silicon growth with the nonlinear and great pure hysteresis characteristics.
许多工业控制对象具有纯滞后的动态特性，常规PID控制方式对这类对象显得无能为力。
There are many industrial Processes with time-delay dynamics, Conventional PID controllers can usually not regulate them very well.
回转窑的生产过程是一个复杂的物理化学反应过程，具有大惯性、纯滞后、非线性等 特点。
Rotary kiln production process is a complex physical and chemical reaction process, with a large inertia, pure lag and nonlinear characteristics.
针对纯滞后对象，提出一种串级双环状态反馈控制方式，使这种对象获得较理想的控制品质。
A kind of cascade control system with state feedback for pure dead-time processes is presented in this paper.
利用惯性过程的阶跃响应特性和线性系统中的叠加原理，提出了纯滞后过程的模糊预估模型。
Using the step response behavior of inertia process and the superposition theorem of linear system, this paper puts forward a fuzzy predictive model of dead-time processes.
针对焦炉温度的大惯性、纯滞后、非线性和时变性等特点，提出了一种新的模糊复合控制方法。
Aiming at the coke oven temperature characteristics of great inertia, pure time-delay, non-linear and time changeable, a fuzzy compound control method is proposed.
大纯滞后系统在控制过程中比较常见且难以控制，如火电厂大多数具有大延迟、大时滞过程的热工对象。
Large delay systems in the control process are very common and difficult to control, such as the majority thermal objects in the coal-fired power plant are with a large time delay.
仿真结果表明该方法对于纯滞后系统具有良好的控制品质，并且对系统内部参数的变化具有较强的适应能力。
The simulation results show that the system with pure lag, designed by this method, has not only fine quality, but strong adaptability to the changes of parameters in the system.
针对烧结这一复杂的物理、化学反应过程的纯滞后特别大的特点，采用BP网络对其烧结矿的质量进行预测。
In view of sintering process that is complex physics - chemistry process with long time - delay, BP network is adOPted to forecast quality of sintered ore.
针对烧结这一复杂的物理、化学反应过程的纯滞后特别大的特点，采用BP网络对其烧结矿的质量进行预测。
In view of sintering process that is complex physics - chemistry process with long time - delay, BP network is adOPted to forecast quality of sintered ore.
应用推荐