它们主要用于各种高压钢丝编织胶管，纤维胶管， 吸管，各种橡胶辊和橡胶护舷。
They are mainly used in all kinds of high pressure wire braided rubber hose , fabric hoses , absord hoses, kinds of rubber rollers and rubber fender .
内层织物呈现出一种手工制作的纤维胶效果——这曾经在德国犯罪系列片《犯罪现场》开始片段中出现过。
The inner fabric is a handmade effect viscose - which even appears for a moment in the opening credits of German crime series, Tatort.
随后，国内涌现出各种各样的建筑结构胶如碳纤维胶、锚固胶、灌缝胶等满足了土木工程领域不同方面的需要。
All kinds of structural adhesives emerged subsequently such as carbon fiber adhesive, anchor adhesive, slot filling adhesive and so on met the various needs in the field of civil engineering.
此时，挤压粘接碳纤维层，冷却聚合胶，之后再进行材料强度和韧性的测试。
The layers were then pressed together and the glue was allowed to cool, before the material was tested for strength and toughness.
聚合胶受热松软，纳米碳管通过碳纤维层将其吸入。
When the glue was hot and runny, the carbon nanotubes sucked it up through the carbon-fibre layers.
在中密度纤维板的生产制造过程中，施胶是个至关重要的工序，它对中密度纤维板的产品质量和制造成本影响很大。
In the process of medium density fibreboard's production, applying glue is the important working procedure, it has big influence on the quality and cost production of medium density fibreboard.
常用的覆盖培养基有：琼脂、淀粉凝胶甲基纤维素和黄蓍胶等。
Various overlay mediums, such as AGAR, starch gel, methyl cellulose and tragacanth are used.
无纺布是由纤维素物质用粘胶剂胶压而成的，其挠折性远不如纱布。
Non - woven fabrics are made of cellulose pastern of plastic pressure, the rupture of much of gauze.
目的探讨局部应用人纤维蛋白胶（FS）对实验性肝损伤的止血和护创作用。
Purpose The aim is to investigate the hemostatic and protective effect of fibrin sealant(FS) on liver trauma in rats.
采用动态剪切流变仪测定了掺纤维沥青胶浆的高温流变特性，结合车辙试验结果评价了此特性对该混合料高温性能的影响。
High temperature rheology of asphalt added fibers was determined and the evaluation of the rheology on the properties of the mix wasperformed in combination with rutting results.
目的观察兔骨髓诱导的内皮细胞用纤维蛋白胶接种到骨组织工程支架上，在体外人工骨血管化效果。
Objective To observe angiogenesis of induced endothelial cells in demineralized bone matrix scaffold seed by fibrin sealant in vitro.
探索并确定了冻胶纤维的最佳萃取和干燥工艺，包括最佳萃取时间、最佳萃取浴比、干燥温度和干燥时间等。
The optimum extracting and drying technology of the UHMWPE gel fiber including the optimum extracting time, extracting bath ratio, drying temperature and drying time were studied and determined.
研究结果还表明，不同表面胶碳纤维对于复合材料的性能影响很大。
The results also showed that different surface of carbon fibers should influence the properties of the composites greatly.
结果表明，UHMWPE纤维的断裂强力随着纤维捻度的增加而减小，纤维浸胶处理后的断裂强力增大；
The results showed that the breaking strength of UHMWPE fiber was improved after dipping treatment, which was decreased with the increase of twist.
对比有胶与无胶纤维布拉伸实验，表明环氧树脂不仅粘接纤维布，对纤维布有保护作用，而且能够显著提高其拉伸强度。
The experiment compare of carbon cloths tension strength with and without glue indicates that the epoxy resin can not only make the fiber adhesive united but also increase the tensile strength.
对在不同工况下使用的玻璃钢产品，其纤维和树脂胶的选用提出了看法。
Some discussions are made in the choice of fibre and resin for fibre glass product manufacture under different conditions.
对在不同工况下使用的玻璃钢产品，其纤维和树脂胶的选用提出了看法。
Some discussion are made in the choice of fibre and resin for fibre glass product manufacture under different conditions.
酚醛树脂，制备方法，用于矿物纤维的施胶组合物与得到的产品。
Phenolic resin, preparation method, sizing composition for mineral fibres and resulting products.
任一种白色的晶体酸，化学式为COOH (CH2)8cooh，用于生产某些合成胶、纤维多种增塑剂和聚脂橡胶。
A white crystalline acid, COOH (CH2) 8cooh, used in the manufacture of certain synthetic resins and fibers, various plasticizers, and polyester rubbers.
羧甲基纤维素，纤维素胶：一种纤维素衍生物，其钠盐在加工食品的制作过程中用作稳定剂和乳化剂，也在医药中用作通便剂。
A derivative of cellulose whose sodium salt is used in the manufacture of processed foods as a stabilizing and emulsifying agent and in medicine as a laxative.
通过干法无胶纤维板制造过程中对木材化学成分的转化和含量变化的研究，探讨了干法无胶纤维板的粘合机理。
The paper studied the reaction mechanism of self bonding in dry process binderless fiberboard manufacture by investigating the chemical composition and conversion of wood.
最后研究了碳纤维复合板材配套用胶的配方及性能。
Finally worked over the Glue formula and its properties for the CFRP Plate.
通过试验分析了烟秆纤维的特征，开发了烟秆无胶纤维板制备工艺并得出优化工艺参数。
Though a serious tests, characters of tobacco-stem fiber are studied, process for preparing tobacco-stem binderless fiberboard is developed and optimum process parameters are obtained.
通过试验分析了烟秆纤维的特征，开发了烟秆无胶纤维板制备工艺并得出优化工艺参数。
Though a serious tests, characters of tobacco-stem fiber are studied, process for preparing tobacco-stem binderless fiberboard is developed and optimum process parameters are obtained.
应用推荐