本文用连分数理论研究并解释纤维缠绕线型。
The article studies the theory of continued fractions and describes filament winding patterns.
纤维缠绕中张力的控制是关系到产品质量的关键技术。
The tension control is the key technique in the filament winding process to guarantee the product quality.
纤维缠绕环形复合材料容器是一种新型结构的压力容器。
Toroidal composite vessel winded with fabric is a new kind of mechanical pressure vessels.
介绍一种固体火箭发动机燃烧室壳体纤维缠绕芯模的设计。
This article introduces a designing means of mold of the fibre winding solid rocket motor combustion chamber shell.
因此，纤维缠绕设备的三维参数化设计成为研究方向之一。
Thus, the 3d parametric design of filament winding equipment around a research direction.
配橡胶内衬的复合材料板壳可以模拟真实纤维缠绕压力容器。
Composite plate and shell with rubber liners can analogize real filament wound pressure vessels.
推导和建立了纤维缠绕壳体大变形有限元公式和有限元模型。
The large deformation formulae of filament wound case (FWC) are derived, and the finite element model of the FWC is established.
这些为多向纤维缠绕复合材料制品的制造工艺提供了理论上的指导。
These provide a theoretical basis for the manufacturing process of the multidirectional filament wound composite products.
介绍了纤维缠绕张力微机系统的控制原理及硬件、软件的设计方法。
This paper introduces the control principle of the filament winding tension control system and the design method of the hardware and the software.
本文提出在纤维缠绕复合材料制品中，采用非测地线稳定缠绕理论。
In this paper, a general theory of stable non-geodesic winding in composite materials is used.
碳纤维缠绕气瓶具有耐腐蚀、用寿命长、轻、度高、破碎的卓越性能。
The carbon fiber wrapped gas cylinder boasts for its anticorrosion, long use life, lightweight, high strength and no breakage.
配橡胶内衬的复合材料板壳可以模拟宇航飞行器的纤维缠绕压力容器。
Composite plate and shell with rubber liner can simulate filament wound pressure vessels of the aircraft.
本文概述了热塑性树脂基体纤维缠绕工艺国内外的研究状况及发展趋势。
This paper briefly introduces the present situation and future trends of thermoplastic filament winding at home and abroad.
应用上述方法设计的控制系统，使纤维缠绕机的纤维缠绕线型准确、可靠。
The filament winding using the new method was accurate and reliable in the string pattern.
经运行证明，该系统技术先进、合理，提高了纤维缠绕中张力的控制精度。
By operating the technique is advanced and reasonable, thus improves the control precision of tension in filament winding.
针对纤维缠绕含胶量的精确测量问题，介绍了一种基于面积测量的测量系统。
A measuring system of detecting glue ratio based on laser sensor is introduced to solve the problem on accurate measurement of glue ratio during filament-winding.
在纤维缠绕压力容器设计中，纤维缠绕的方向及各方向纤维用量配比是关键问题。
In design of composite pressure vessels, the fiber orientations and quantities of fiber in different orientations are the key problems.
本文简要介绍了玻璃钢在飞机头部雷达罩中的应用及其用纤维缠绕法成型的概况。
This paper introduces the method of fabrication of FRP nose radome by filament winding process.
纤维缠绕复合材料气瓶用于呼吸器、车用压缩天然气燃料气瓶及航空航天等领域。
Filament wound composite gas cylinders are widely used in respirator, compressed natural gas vehicle fuel cylinders and the fields of aerospace, et al.
本文采用大变形有限元方法进行纤维缠绕固体火箭发动机壳体的应力及爆破分析。
In this paper we employed the nonlinear finite element method to calculate the stress and bursting pressure of filament wound rocket motor case.
以纤维缠绕结构的网格理论为基础，建立了纤维缠绕圆锥壳体在内压作用下的平衡方程。
Based on the netting theory for the filament-wound structure, the balanced equation of the filament-wound conical case under internal pressure was derived.
本文压力容器几何非线性分析的结果表明铺层方向是影响纤维缠绕壳体强度的最大因素。
The results of geometrical nonlinear analysis show that the effect of layer orientation on the strength of fiber-winding case is the most significant factor.
用于固体火箭发动机壳体和工业贮罐的纤维缠绕压力容器，爆破压强是重要的设计参数。
The burst pressure of filament wound pressure vessels which is applied to solid rocket motor case and gas tank in industry is an important design parameter.
本文分析了纤维缠绕玻璃钢管道的渗漏原因，并提出了提高玻璃钢管道防渗能力的对策。
The seepage of filament wound FRP Pipe is analyzed and the way to improve the capability a gainst seepage of FRP Pipe is presented.
以纤维缠绕结构的网格理论为基础，建立了纤维缠绕圆锥壳体在内压作用下的平衡方程。
Based on the netting theory, the balance equations of the filament-wound toroidal pressure vessel under the internal pressure were derived.
无碱玻璃纤维缠绕用直接无捻粗纱应用于纤维缠绕和挤压成型工序，手糊成型和方格布产品。
E glass direct roving is used in filament winding and extrusion process, hand lay-up and woven roving products.
本文分析计算了基体开裂及大变形对纤维缠绕壳体变形的影响，得到了比较满意的理论分析结果。
For matrix cracking and large deforming, the deformation of a filament wound case is analyzed and calculated.
本文对以高密度聚乙烯为内衬的玻璃纤维缠绕复合材料天然气气瓶的制造工艺进行了初步试验研究。
This paper studies the manufacturing processing of compressed natural gas bottle of glass fiber filament winding composites with HDPE liner.
本文对以高密度聚乙烯为内衬的玻璃纤维缠绕复合材料天然气气瓶的制造工艺进行了初步试验研究。
This paper studies the manufacturing processing of compressed natural gas bottle of glass fiber filament winding composites with HDPE liner.
应用推荐