该非水喷墨油墨至少包含颜料、粘结树脂和有机溶剂；
This nonaqueous ink-jet ink comprises a pigment, a binder resin, and an organic solvent.
这当然会影响树脂基体与玻璃间的良好粘结。
This would certainly militate against good bonding between the resin matrix and the glass.
生产应用结果表明，该树脂粘结剂中甲醛含量可控制在1.8%以下，力学性能完全可以满足生产要求。
Practice results indicated that the content of formaldehyde in resin binder can be controlled less than1.8%and the mechanical properties completely satisfied the requirement of production.
封盖可选择平行缝焊、钎焊、玻璃熔封或树脂粘结。
The fixing and sealing may choose among parallel - seam welding, braze welding, glass - melting - sealing and resin binding.
利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬，通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。
Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article.
浸渍树脂作为复合材料的原料之一以及FRP与结构的粘结材料，其耐久性直接影响FRP加固结构的效果。
The durability of saturating resin which is one of components of fiber reinforced polymer and adhesive material of FRP and concrete, affects the property of FRP reinforced structure.
该丝网和中心管是环氧树脂粘结到去年底的上限。
The wire mesh and center tube are epoxy-bonded to the end caps .
目的：研究复合树脂对医用钛材和牙体硬组织的粘结性能。
Objective: To investigate the bonding effect of composite resins on titanium materials and dental hard tissues.
浸渍树脂作为复合材料的原料之一及FRP与结构的粘结材料，其耐久性直接影响FRP加固结构的效果。
The durability of saturating resin which is one of components of fiber reinforced polymer and adhesive material of FRP and concrete, affects the property of FRP reinforced structures.
它也可用作粘结剂和离子交换树脂。
锶铁氧体化学稳定性良好，锶铁氧体磁钢一般用环氧树脂粘结成磁组固定在磁系中，也存在磁块易脱落现象。
Strontium ferrite chemical stability is good, strontium ferrite magnets general with epoxy resin bond into magnetic fixed set in magnetic of, also exist magnets easily falls off phenomenon.
该共聚树脂粘结剂具有许多优点，符合铸造要求。
The results. showed that the copolymer resin is an adhesive with more merit which meet the needs of casting.
将碳纤维织物浸渍-涂层酚醛-缩醛粘结剂树脂，加压固化后制备出碳纤维织物复合材料。
The carbon fabric composites were prepared by dip-coating of the carbon fabric in a phenolic resin and solidified under pressure.
还讨论了煤焦油、偶联剂、树脂与粘结体之间的作用机理。
The action mechanism of coal tar, coupling agent, resin and consolidating body was also discussed.
热塑性酚醛树脂是人类最早用化学反应方法合成出的树脂粘结剂之一。
Novolak resin is one of the earliest resin binders that were made by human being with chemical reaction.
酯固化碱性酚醛树脂是一种新型的造型、制芯工艺，这种粘结剂体系由碱性酚醛树脂和有机酯两部分组成。
Ester cured alkaline phenolic resin, which is synthesized by alkaline phenolic resin and organic ester, is a new type of binder used for molding and core making.
目的研究树脂类粘结剂边缘厚度与全瓷冠边缘微渗漏的相关关系。
Objective To investigate the relationship between marginal film thickness of resin luting cements and microleakage.
在此基础上加入QS型增韧剂，形成具有“海岛结构”的环氧树脂合金，粘结性能进一步提高。
Based on this, QS toughener was added to form epoxy resin alloy of "sea island structure", thus further improving its adhesion.
良好的界面粘结是制备高性能复合材料的关键之一，而树脂与纤维的优良浸润则是其首要前提。
In a composite system, the adhesion at the interface between fiber and matrix plays an important role in improving the resulting mechanical behavior.
介绍一种粘结强度大、固含量高、低毒环保型的脲醛树脂粘合剂的合成方法。
A novel method for producing urea formaldehyde resin with intensive viscidity, high solid content and low toxicity is introduced in this report.
本文新型CO_2硬化酚醛树脂粘结剂的制备技术以及硬化机理的研究就是为适应这一要求而研究开发的。
Researching on the new producing technique and curing mechanism of CO_2-cured phenolic resin binder in this paper is developed to be meet the requirement.
粘结单体4一META作为陶瓷偶联剂的添加成分，对瓷和树脂的粘结无帮助。
As an additioner in silane coupling agent, the functional monomer of 4-META can not help the bonding between porcelain and composite resin.
热固性酚醛树脂是树脂砂铸造生产中重要的树脂粘结剂之一。
Resol phenolic resin is one of important resin adhesives in foundry industry.
苯酚、苯基苯酚、尿素与甲醛的反应产物进一步与糖醇缩聚生成新型铸造用改性酚醛树脂粘结剂。
A new type of phenolic resin adhesive for casting was prepared by condensation polymerization of furfuryl alcohol and the reaction product between phenol, phenylphenol, urea and formaldehyde.
目的：研究颜色的不同对树脂粘结剂径向抗张强度及其与瓷粘结强度的影响。
Objective To study the effects of colour on diametral tensile strength and bonding strength of resin.
为生产出甲醛含量低、强度高、成本低和工艺性强的粘结剂，通过改进合成工艺及添加助剂，研制出了一种低游离醛的树脂粘结剂。
Improvement on synthesis process and additives was made to develop a new type of resin binder with low content of formaldehyde, high strength and low costs.
该树脂渗透性快，浸润性好，可提高制品层间粘结力。
The resin fast permeability, infiltration of good products can improve bond strength between layers.
选用酚氧树脂作为吸波涂层(RAC)粘结剂，研究了溶剂、分子量、固化剂对RAC主要力学与物化性能的影响。
Phenoxy resin was used as binders of radar absorbing coatings (RAC). The effect of solvents, molecular weight and curing agent on the mechanical properties of RAC has been investigated.
选用酚氧树脂作为吸波涂层(RAC)粘结剂，研究了溶剂、分子量、固化剂对RAC主要力学与物化性能的影响。
Phenoxy resin was used as binders of radar absorbing coatings (RAC). The effect of solvents, molecular weight and curing agent on the mechanical properties of RAC has been investigated.
应用推荐