对渤海湾西北部潮间带16个样品分别进行了激光法与综合法(筛析沉降法)粒度测量。
Grain size analyse experiment of 16 samples, taken from the tidal flat of the northwest Bohai Bay, was carried out by laser and pipette-sieve methods simultaneously.
主要内容有:(1)提出粒度测量函数的概念。并在此基础上提出粒度分析的共同指标;
The major points of the paper are as follows: (1) the concept of particle measuring function is presented, based on which, the general specification of particle analysis is given;
第五章讨论如何把重叠的细胞图像分离开来,提出了一种基于粒度测量的重叠细胞分割(分离)算法。
Chapter 5 discusses how to separate overlapping cell images and proposes a separating algorithm based on granulometry.
利用FAM激光粒度测量仪,以水为工质对不同结构旋涡压力喷嘴在不同压力条件下的雾化特性进行了实验研究。
The atomization characteristics of different eddy pressure nozzles were investigated using FAM laser particle size analyzer with water as working fluid in different pressure conditions.
因为纳米颗粒散射光所呈现的光谱是由颗粒粒径决定的,所以在纳米颗粒粒度测量中,单一角度测量只能观测到样品的部分情况。
Because the scattering spectrum of nanoparticles is determined by nanoparticles size, so only part of the sample can be observed at single Angle in measuring nanoparticles size.
外部可配置上下文跟踪的灵活性支持以更加准确和粒度化的方式来定义和测量性能阀值。
The flexibility of externally configurable contextual tracing enables a more accurate and granular way to define and measure performance thresholds.
该数据由一系列遍及目标的定量测量指标组成,它们为整个系统的健康状况提供细粒度和详细的表示。
This data consists of a series of ongoing quantitative measurements that are pervasive in their targets to provide a granular and detailed representation of the whole system's health.
如能得知液滴尺寸与其带电量的关系,对于液滴粒度及其分布的测量是十分重要的。
It is important that is measured the liquid droplet size distribution, if the relation of size and charges is known.
在详细分析激光粒度仪工作原理的基础上,介绍了一种分层方法,用于修正高浓度悬浊液而引起的测量误差。
On the basis of analyzing the operation principle of laser particle sizer, we introduce a method of delamination which is employed to revise the measurement error by high concentration suspension.
本文介绍了雾化区温度分布、金属粉末粒度及速度分布的在线测量技术,它们包括图象技术与非图象技术两大类。
Some on-line available techniques for measurementS of temperature profile and distribution of velocity and size of droplet and powder are introduced in this paper.
介绍了测量液滴粒度及分布信号处理装置的设计,并给出了实验结果。
The design of the signal processing device for measuring the liquid droplet size and distribution is introduced, and the experimental results are given.
用DTEM观察了全部试样的液相分离结构,系统地测量液相小滴的粒度分布。
For all the specimens, liquid phase separation structures were observed generally by DTEMand a systematic measurement of liquid droplet size distribution was carried out.
通过扫描电镜对聚苯乙烯微球进行了形貌表征,激光粒度分析仪测量聚苯乙烯微球的粒径。
By scanning electron microscopy, the morphology of polystyrene microspheres was characterized, the particle size of polystyrene microspheres was measured by laser particle size analyzer.
在陶瓷产品生产过程中,快速测量和有效控制粉体的粒度及其分布,对提高产品质量、降低生产成本具有重要意义。
In the ceramic production process, fast mensurate and efficient control powder granularity and their distribution have important meaning in raising product quality and reducing cost.
通过对改性产品接触角测量和红外光谱分析,探讨了颗粒粒度、表面性质、晶体结构对填充橡胶性能的影响。
Through measures such as surface contact Angle method and infra-red spectrum, the effects of particle size, particle surface activity, particle shape, etc were studied.
采用激光纹影高速摄影和激光衍射方法进行喷雾结构特性和粒度特性测量。
The spray shape and droplet characteristics were measured by means of Laser schlieren high speed photography and Malvern Laser Diffraction method.
测量结果与消光法测量进行对比,表明该方法应用到颗粒粒度大小测量是切实可行的。
The ultrasonic measurement results are compared with light extinction method measurement, which shows this method has a good foreground for particle sizing.
粒度分布测量过程中,由于各种原因,使得测量结果不能再现。
Results could not recur for many reasons during the measurement of particle distribution.
由于喷雾干燥中雾滴的运动较复杂,所以目前多是通过实验测量来确定雾滴粒度分布,有很多不便因素。
There is much inconvenience in measuring particle size distribution by experiments at present, because of droplets movement complexity in spray drying.
采用淘析法、激光粒度分析法、渗透过滤法、显微镜法对膨润土及石英的粒度进行测量比较分析。
The particle sizes measured by elutriation method and laser particle size analysis are bigger than those by the other two methods due to aggregation.
采用SEM、激光粒度仪对不同分解炉温制备的初级粉末的形貌进行观察,对其粒度进行测量。
Morphology of raw powders prepared at different stove temperature were studied by using SEM and granularity of powders were measured by laser granularity analyzer.
通过激光粒度仪等测试设备,测量了多种喷头的喷雾特性。
The nozzle's spray characteristic were measured and analyzed by laser granularity instrument.
讨论了对纳米碳酸钙的粒径测量方法,如:电镜、激光粒度分布仪、沉降体积、筛分法。
The measurement methods of particle size of nano-CaCO_3 including SEM method, laser size distribution method, sedimentation volume method and screening method are discussed.
将供给态粉和研磨态粉由激光衍射法、FSSS法和BET法测量出颗粒粒度。
FSSS method, laser diffraction method and BET method were used to perform the particle size measurement.
用激光散射法测量粒度时,要考虑引入折射率,本文讨论了它对粒度结果的影响。
Refractive index should be introduced in particle sizing with laser scattering. This paper discussed its effect on analysis data.
通过测量主轴功率获得切向磨削力,讨论了加工参数,如切深、进给率以及砂轮粒度对切向磨削力的影响。
Tangential grinding forces are obtained through monitoring spindle power and the ir variations are studied with process parameters such as depth of cut, feedrate and wheel grit size.
颗粒粒度的测定已成为现代测量学的一个重要分支。
Particle size measurement has become an important branch of modern surveying.
本文对用光学粒子计数器在飞机上测量的大气气溶胶数密度-粒度谱分布进行了分析研究。
Size distributions of number concentration of atmospheric aerosol measured by optical particle counter aboarded on aircraft were analysed.
利用马尔文粒度分析仪测量喷嘴在不同工况下达到的雾化粒度。
The drop-size of liquid was measured in different conditions by Malvern spray analyzer.
利用马尔文粒度分析仪测量喷嘴在不同工况下达到的雾化粒度。
The drop-size of liquid was measured in different conditions by Malvern spray analyzer.
应用推荐