脉冲和放电量统计表明本文方法更符合实际，研究污秽闪络机理更有效。
According to the statistic of impulses and amount of discharge, it indicates the method put forward by this paper is more effective way to study the mechanism of pollution flashover.
脉冲参数对显微硬度和拉伸强度的影响符合相似的规律，但也有所不同；
The effect of pulse parameters on micro-hardness and stretch strength correspond to similar law, but different slightly.
针对一新型表面处理工艺，设计了一种符合工艺要求、可输出双向不对称脉冲的高压脉冲电源实现电路。
This paper introduces the design of high voltage low current pulse power supply with two polarities, which is used in a new type chemical surface disposal.
此外，为符合会聚误差测量中栅极驱动脉冲特定带宽的要求，脉冲的高技术指标仍然是不可缺少的因数。
In addition, the demanding technical specification is still indispensable factor, which accords with the special bandwidth demand of the grid drive pulse in measuring the convergence error.
为了保证高精度线阵CCD精确稳定的工作，必须设计出符合其工作所要求的各种脉冲。
A variety of drive pulse should be designed well in order that the operation of high precision linear CCD is precise and stable.
液压脉冲设备是用来对液压软管、导管组件进行冲击试验时，产生符合标准的脉冲波形。
Hydraulic impulse testing equipment was used for producing standard shape of impulse trace when testing for hoses and tubing assemblies.
双正交pSW F脉冲是符合UW B通信系统要求的一种性能较理想的脉冲。
Doubly orthogonal PSWF pulse is an ideal pulse according with the requirements of UWB communication system.
将有关参量和实验测量值代入这些解，所估算的脉冲宽度数量级与实验显示值能较好地相符合。
The pulse width has been estimated by substituting the parameters and experimental values into the solutions, and the result agrees with that of the experiments within an order of magnitude.
在多个短脉冲驱动时，除了与严重过电离的复合等离子体有关的实验外。理论模拟与实验也基本符合。
And in the case of multiple-pulse, theoretical simulations are also consistent with experiments except the experiments with seriously over-ionized recombination plasmas.
数值计算结果表明：当选取合适的光纤参量时，脉冲在非线性递增光纤中的压缩过程基本符合绝热脉冲压缩的要求；
The numerical results show that the pulse compression process in this kind of fiber satisfies the adiabatic condition by selecting the reasonable systematic parameters.
调制前由频谱优化器运用最小面积准则（LAC）对正交脉冲的参数进行优化计算并调整，使脉冲频谱符合FCC频谱模板要求。
The orthogonal pulses are adjusted by the optimizer which calculates the parameters based on Least Area Criterion (LAC) before modulation in order to follow the requirements of FCC spectral mask.
该研究表明，梯形成形很好地符合核谱仪的脉冲成形要求，通过针对具体情况优化参数设置，易于满足不同应用的需求。
The results also show that the algorithm fulfils the pulse shaping requirements of the nuclear spectrometer with optimal parameter settings for different applications.
经脉冲分配器和功率放大后控制步进电机，使步进电机的转速符合所要求的正弦曲线。
Through cyclic pulse distributor and power amplifier, the pulses drive step-motor and let the speed of step-motor in agreement with a required sine function.
计算结果表明，脉冲引发时刻概率分布的计算结果与实验结果符合较好，所获得的缓发中子发射率规律可合理解释引发时刻概率分布的实验结果。
The result of initiation time is consistent with experiment. Emission rate of delayed neutron attained from calculation can well explain the probability distribution of initiation time.
消防联动控制设备应符合GB16806 - 1997标准的要求。检测项目有：静电放电；辐射电磁场；电快速瞬变脉冲群。
Integrated fire control equipment meets the requirements of GB16806-1997. The test items include Electrical transient bursts, Electrostatic discharge, and Radiated electromagnetic fields.
通过试验，得到了基本符合冲击试验规范的后峰锯齿波冲击脉冲波形，为实现任意冲击波形提供了理论依据。
After testing, the final peak saw-tooth shock pulse is basically suitable for shock testing rules. It provides the theoretical basis to realize shock pulse.
对几类函数波形和一组实测高空核爆电磁脉冲（HEMP）波形的验证结果表明，HEMP波形、余（正）弦阻尼振荡波形等信号的重建波形与原始波形符合很好。
The reconstruction of minimum phase signal, such as the HEMP waveform, cosine or sine exponentially damped waveform etc, shows good agreement with the original.
火灾报警控制器应符合GB4717-1993 标准的要求。检测项目有：静电放电；辐射电磁场；电快速瞬变脉冲群。
Control and indicating equipment (c. i. e) meets the requirements of GB4717-1993. The test items include Electrical transient bursts , Electrostatic discharge , and Radiated electromagnetic fields.
在色散补偿量相同的情况下，压缩效果随入射脉冲能量变化的规律符合理论估计。
When the dispersion compensation is the same, the relationship between the compression result and the input laser energy agrees with the theoretical analysis.
研制的脉冲能量控制焊接电源经试验验证，电源工作稳定，可靠，符合焊接工艺的要求，达到了设计要求。
Through many tests, Power supply is stable, safe and reliable, comply with the requirements of welding process and reached the design requirements.
研制的脉冲能量控制焊接电源经试验验证，电源工作稳定，可靠，符合焊接工艺的要求，达到了设计要求。
Through many tests, Power supply is stable, safe and reliable, comply with the requirements of welding process and reached the design requirements.
应用推荐