• 因此,为了保证车辆运行的稳定性及安全性,应设法避免使用外形严重磨耗的车轮。

    Therefore, use of seriously worn wheels should be avoided in order to ensure good dynamic characteristics and running performance of vehicle systems.

    youdao

  • 最后提出了一些减缓曲线钢轨侧面磨耗的措施。

    In the end, some measures for regarding the side wear on curves are put forward.

    youdao

  • 机车转向架横向弹性连接装置是减少轮缘磨耗的主要措施。

    Lateral elastic coupling device of the locomotive bogie is a main provision of decreasing wheel flange wear.

    youdao

  • 结论垫式义齿和固定义齿是老年人重度磨耗的有效修复治疗方法。

    Conclusions occlusal splint and fixed denture are effective in the restoration of severe occlusal attrition in the seniors.

    youdao

  • 本文研究了火车运行过程中获得的闸瓦图像的识别、磨耗的自动检测方法。

    This paper studies the recognition of the brake image obtained when a train is running and the automatic test of brake wear.

    youdao

  • 结果表明,直接法对修复体早期磨耗的评估不敏感,但对修复体其它方面的评价目前仍为首选;

    The results suggested that the direct evaluation method for early wear of restorations would be less sensitive, but it remains the preferred system for the evaluation otherwise;

    youdao

  • 分析了车辆导向轮侧滑量在允许值范围仍出现轮胎异常磨耗的原因,并讨论了前轮检测中应引起重视的几个问题。

    The causes of anomalous tire wear at side slip value of front wheel keeping normal value were analysed and some problems of measuring front wheel alignment were discussed.

    youdao

  • 从磨损机理及试验曲线段试验数据两方面分析了小半径曲线钢轨侧面磨耗的原因,提出了预防的措施和解决的办法。

    This article analyses reasons of the side rail wear in the sharp curve rail, puts forward the preventive measures and the handling means.

    youdao

  • 结论:牙齿重度磨耗导致异常的下颌边缘运动。

    Conclusion: Severe tooth wear lead to abnormal mandibular maximum excursions.

    youdao

  • 当移位发生在右侧的时候,下颌则向右侧偏移,导致右侧后牙受力大,并开始磨耗。

    When this occurs on the right side, the mandible gets deviated to the right, causing the posterior teeth on the right side to hit harder and start to wear.

    youdao

  • 分析的重点是直线稳定性、曲线轮轨横向力和轮轨磨耗指标等参数。

    The analysis has been concentrated on parameters such as stability, lateral wheel track forces in curve and wheel wear indices.

    youdao

  • 分析了提速前后客车车轮磨耗规律,找出原因,并提出了相应的预防措施。

    The wear laws of passenger car wheels before and after speed increase are analysed, the reasons are found out, and relevant preventative measures are given out.

    youdao

  • 车轮踏面磨耗导致车轮外形改变,使其滚动圆直径产生偏差,对车辆系统的动力学特性影响较大。

    Wheel tread wear leads to change of the wheel profile and rolling diameter, which influences the dynamic behaviors of railway vehicles seriously.

    youdao

  • 针对青藏铁路客车轮缘异常磨耗导致的轮对旋修问题进行了经济性分析。

    The economy analysis is made on the wheelset turning caused by abnormal wear of wheel flange of passenger cars on Qingzang Railway.

    youdao

  • 研究了冻融与磨耗复合作用下的混凝土耐久性能。

    The concrete durability under the compound action of freeze-thaw and abrasion is studied.

    youdao

  • 就增高耐热与耐磨耗性能而言,在合金化设计上,烧结合金远比常规的锻钢与铸造合金灵活。

    They have possessed high flexibility in their alloying design to increase their performance in heat and wear resistance in comparison with that of conventional wrought steel and cast alloys.

    youdao

  • 结论:精密附着体修复对于牙列缺损伴重度磨耗患者是一种有效的方法。

    Conclusion Precision attachments prostheses are effective methods of dentition defect accompanied with severe dental attrition.

    youdao

  • 使用室内磨耗试验机LAT100研究含NR、SBR、BR及不同品种炭黑胎面胶的耐磨性和抗湿滑性。

    The abrasion resistance and wet traction of NR, SBR and BR vulcanizates with different carbon blacks respectively were investigated by LAT100 abrasion tester.

    youdao

  • 而口内测量由于操作的限制,很难实现对一定时期内牙磨耗量的精确测量。

    Confined by the operation condition, intra-oral measurement can't make a precise result of tooth wear in a period.

    youdao

  • 在对矿井电机车用滑板的磨耗进行分析和对各种滑板的使用进行比较的基础上,对滑板的生产工艺和使用进行了研究。

    Technique of production and applications of the slide were studied on the basis of the wear analysis of slide for mine electric locomotive and the comparing of applied situation of various slides.

    youdao

  • 轮缘磨耗主要是轮轨相互作用的结果,而踏面上的凹槽磨耗可能主要由闸瓦制动引起。

    The wheel flange wear is caused by the flange action of the wheel and rail, whereas the double-groove wear on tread may be mainly caused by the break shoe.

    youdao

  • 以丁苯橡胶基础配方为依据,研究了炭黑种类及用量、老化时间对溶聚丁苯橡胶T2000R和乳聚丁苯橡胶1502阿克隆磨耗和DIN磨耗性能的影响。

    Based on the fundamental formula of SBR, the effects of carbon black types and dosage, the aging time on the Akron and DIN abrasion resistance of SSBRT2000R and ESBR1502 were studied, respectively.

    youdao

  • 结果:随着磨耗程度的加重,髁状突表面的应力增加较多。

    Results: the stresses on the surface of the condyle increased obviously as the tooth wear aggravated.

    youdao

  • 第一磨牙的磨耗程度最重,第三磨牙的磨耗程度最轻。

    The first molar has the most serious tooth wear and the third molar was the lightest.

    youdao

  • 循环流化床锅炉炉内的燃烧及传热与炉内床料的状态密切相关,而炉内床料主要是由燃煤含有的矿物组分经过燃烧、爆裂和磨耗过程形成的。

    The combustion and heat transfer in CFB boiler are related with the bed material, while the bed material is formed during the coal combustion, fragment and attrition processes.

    youdao

  • 并对共混物的力学性能、磨耗性能及微观形态进行了研究。

    The mechanical properties, wear properties and micro-morphology of the prepared blend were studied.

    youdao

  • 提出用光电图像方法非接触检测车辆轮对的轮缘磨耗。

    A optoelectronic image detecting method of wheel set flange wear is researched.

    youdao

  • 运用轮轨相互作用原理,研究轮轨磨耗伤损的机理。

    Based on the principle of wheel-rail interaction, the mechanism of the abrasive wear damage of wheels and rails is studied.

    youdao

  • 机车轮对的检修是十分重要的,轮缘磨耗、踏面磨耗等是重要的测量参数。

    To examine locomotive wheels is very important, brim abrasion and fade abrasion of the wheels are the important parameters.

    youdao

  • 机车轮对的检修是十分重要的,轮缘磨耗、踏面磨耗等是重要的测量参数。

    To examine locomotive wheels is very important, brim abrasion and fade abrasion of the wheels are the important parameters.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定