检验设备完善，有磁粉探伤机和硬度计。
Improve the testing equipment, magnetic detection machines and hardness.
理论分析与磁粉探伤的经典实验基本一致。
Theoretical analysis conformed with the classical experiment of magnetic particle inspection on the whole.
提出了适宜于滚子轴裂纹的磁粉探伤方式。
And the magnetic particle detection manner for the roller shaft crack is put forward.
在拆除这些附件后，对表面进行打磨并进行磁粉探伤。
After removing these attachments, the surface shall be ground flush and examined by magnetic particle method.
所有加工面，包括磨整过的表面，都必须进行磁粉探伤。
All (100%) machined areas, as well as grinded surfaces must be inspected by magnetic particle.
介绍了磁粉探伤的原理、工艺流程及在重型汽车维修中的应用。
The paper introduces the principle and technological process of magnetic powder inspection and its application to maintenance of heavy-duty truck.
磁粉探伤法是用磁场探测铁磁性材料表面和次表面的不连续性。
Magnetic-particle inspection USES magnetic fields to locate surface and subsurface discontinuities in ferromagnetic materials.
曾在修补其余21个原始焊缝上进行了着色渗透和磁粉探伤检查。
Dye-penetrant and magnetic particle inspection techniques were used on the repaired and other 21 remaining original welds.
为了提高生产效率，解放劳动力，将数字图像处理的相关技术应用到磁粉探伤中。
In order to enhance the production efficiency, and liberate labor force, people applies the digital image processing technology in the magnetic powder test.
江苏射阳利德探伤机厂是国内无损检测行业磁粉探伤设备的专业研制和生产单位。
Sheyang, Jiangsu lied INSPECTION Factory is the NDT industry magnetic detection equipment professional development and production units.
通过计算研究小间距孔磁粉探伤时不同磁化方法对显示缺陷的有效磁场强度的影响。
The effects of magnetizing methods on the effective magnetic field strength showing the defects in the holes with short distances in magnetic particle inspection were studied by calculation.
通过分析漏磁场的狭缝效应，并借用已有物理模型，探讨磁粉探伤原理模型和应用范围。
By analysis of magnetic leakage effect, discusses magnetic powder detection principle and application range, borrowing physical module.
检测钻具缺陷的常用方法有磁粉探伤、渗透检测、射线检测、超声波检测，都存在不足。
The common methods of drilling rods testing include magnetic particle inspection, permeability testing, radial testing and ultrasonic testing, but these methods all have considerable deficiencies.
结果表明，活塞杆在磁粉探伤中显现的螺旋形磁粉堆积线是由热处理缺陷一屈氏体软带造成的。
The result proves that the accumulate line is caused by heat treatment defect, soft troostite tape.
指出，只有采用湿萤光磁粉探伤法才能有效地检查在湿硫化氢环境下操作的容器可能产生的裂纹。
It was pointed out that the crackles produced on vessels operating under wet H2S circumstance can only be detected effectively by the wet magnetic powder fluorescent method.
对集箱异种钢管接头角焊缝磁粉探伤的方法和准确性进行了探讨，并在产品上进行了实物解剖验证。
This article discusses the method and accuracy for header differential steel nozzle fillet magnetic particle inspection, and shows the actual dissection result that the author did on products.
最后，本课题通过焊后的外观检测、磁粉探伤焊、超声探伤和射线探伤证明了焊接工艺规范合理可行。
Finally, the welding procedure has been proved to be feasible by as-welded appearance checking, magnetic powder inspection, ultrasonic inspection and radiographic inspection.
针对目前轴承荧光磁粉探伤人工观察方法存在的问题，介绍了一种轴承荧光磁粉探伤结果的自动识别方法。
Aim at the existing problems of the manual inspecting in bearing fluorescent magnetic detection, introduced an automatic identification method on the result of bearing fluorescent magnetic detection.
荧光磁粉探伤是一种常用的无损检测方法，是控制产品质量的重要手段，用于检测钢制零件的表面及近表面的裂纹缺陷。
Fluorescent magnetic particle detection is a NDT method that often is used for testing trivial flaws on the surface of some steel workpiece and for controlling qualities of product.
荧光磁粉探伤是一种常用的无损检测方法，用于检测钢制零件的表面及近表面的裂纹缺陷，长期以来一直被认为是表面裂纹检测最灵敏的方法之一。
Fluorescent magnetic particle detection is a NDT method that often used for testing trivial flaws on the surface of ferromagnetic materials in order to control the qualities of product.
目前，对抽油杆的自动探伤主要有涡流、漏磁、磁粉及超声方法，各有其优缺点及适用范围。
Eddy current, magnetic leak, magnetic particle and ultrasonic test are the main methods used for pumping rod test.
介绍了一套荧光磁粉无损探伤检测系统。
This paper introduced a fluorescent magnetic particle Non-destructive testing system.
介绍了一套荧光磁粉无损探伤检测系统。
This paper introduced a fluorescent magnetic particle Non-destructive testing system.
应用推荐