• 结果表明:对于碳含量有差异的钢板,其显微组织、晶粒度及夹杂物等级均属正常,焊缝中未发现淬硬组织;

    The obtained results indicate that the microstructure, grain-size and inclusion level of said steel plates were normal, hardened structure induced from quench had not been found;

    youdao

  • 研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。

    Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.

    youdao

  • 淬硬钢制成的零件具有一系列优良性能,用切削代替磨削加工这些零件,具有明显的优点。

    Parts made of hardened steel have good performance. It has obvious advantages to substitute cutting for grinding these parts.

    youdao

  • 自制抗磨铸钢硬度高、焊后淬硬倾向严重。

    The homemade wear-resistant cast steel has high hardness and high tendency of hardenability after welding.

    youdao

  • 该仪器完全能满足生产实际对淬硬层深度的测量要求。

    This instrument can meet the need of actual manufacture for hardness depth measurement.

    youdao

  • 模具淬硬钢高速铣削加工既可以保证加工表面的质量,又可以获得较高的生产效率。

    High speed milling of hardened mould steel can not only ensure the quality of the surface that has been processed, but also achieve a high efficiency of production.

    youdao

  • 这些内圈是碳铬钢制造的,并经过淬硬和研磨。

    They are made of carbon chromium steel and are hardened and ground.

    youdao

  • 由于马氏体这一淬硬钢主要成分的不稳定性,使得回火成为可能。

    Tempering is possible because of the instability of the martensite, the principal constituent of hardened steel.

    youdao

  • 回火完全淬硬钢得到的最终组织结构被称为回火马氏体。

    The final structure obtained from tempering a fully hardened steel is called tempered martensite.

    youdao

  • 表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。

    Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.

    youdao

  • 淬硬工具钢。

    Hardened tool steel.

    youdao

  • 磨削深度是影响工件表面硬度和磨削淬硬层厚度的主要因素。

    The effect of grinding depth on work piece surface hardness and hardness layer depth is important factor.

    youdao

  • 磨削热导致回火引起淬硬钢磨削后表面硬度变化。

    Tempering resulting from grinding heat caused surface hardness changes of hardened steels after grinding.

    youdao

  • 利用高碳钢淬火试样及淬火后充氢试样的拉伸试验,研究了高碳钢淬硬组织对氢和应力的敏感性。

    The sensibility of the harden structure of high carbon steel to hydrogen and stress is researched through the tensile test of quenched specimens and charging hydrogen specimens after quenching.

    youdao

  • 双程磨削淬硬可使表面硬化层深度及其均匀性、显微硬度及耐磨性得到进一步提高;

    The depths and its uniformity of the surface hardened layer, its microhardness and wear resistance are further improved under two-passes grinding.

    youdao

  • 钢材的淬硬倾向、焊接接头含氢量及其分布,以及接头所承受的拘束应力状态是产生焊接冷裂纹的三大主要因素。

    Harden tendency of steel, content and distribution of hydrogen in welded joints, restraint stress resistance of joints are three factors that leads to the cold cracks of the welded joints.

    youdao

  • 根据我国具体的生产实际情况,有必要建立我国自己的淬硬高速钢洛氏硬度和维氏硬度换算的标准。

    According to real production case of our country, it is necessary to establish the standard about the conversion tables on hardness and strength of hardened high speed steel.

    youdao

  • 结合生产,对s- 136淬硬钢高速铣削工艺的刀具选择、冷却方式、进给路线进行了分析。

    Choice of cutting tool, cooling manner and feed path in high speed milling S-136 hardened stainless tool steel were analyzed, based on a S-136 die production.

    youdao

  • 介绍了火焰切割对低合金高强度钢在残余应力、淬硬、渗碳等方面的影响。

    This article introduces the impact of flame-cutting on high strength lower alloy structural steels from curious aspects Such as remnant stress, quench rigidity, cementite and so on.

    youdao

  • 基于锻后预冷淬火可提高工件的淬硬层深度,本文提出锻后余热预冷淬火工艺。

    Based on that hardened case depth can be increased by delay in air after forging, the technique of delay quenching after forging is proposed in this paper.

    youdao

  • 热轧工作辊的裂纹损坏和冷轧工作辊有效淬硬层过浅是两大突出问题。

    The principal problems with respect to roll working life are cracking at the surface of roll for hot-rolling and that effective zone of quench-hardening of roll for cold-rolling is too narrow.

    youdao

  • PEP-II泵的齿轮与轴共为一体,采用通体淬硬工艺,可获得更长的工作寿命。

    PEP - II of the gear pump shaft, and the body USES hardening craft, can obtain more long working life.

    youdao

  • 激光 输出功率增大,淬硬层深度和宽度增加。

    The depth and width of quenching layer increases with the laser power increasing.

    youdao

  • 特别是JT9和JT11刀具,不但刀具磨损量小,加工表面质量好,而且在切削45钢和45淬硬钢时切屑为崩碎切屑。

    Especially the tool wear size of JT9 and JT11 is small and the machined surface quality is high. In cutting 45 anneal steels and 45 hardened steels by JT9 and JT11 tools, chips were segments.

    youdao

  • 淬硬精密丝杠的牙形精度取决于精磨。

    The accuracy of the tooth forms of the quenched precision lead-screws is decided by the precise grinding.

    youdao

  • 模具应抛光、淬硬。

    Mold should be polished, hardened.

    youdao

  • 回火:将已经淬硬的钢材再加热到低于临界点以下的某一温度,保温一定时间然后根据要求冷却到一定温度的工艺;

    TEMPER : Process of re-heating hardened steel to a temperature below critical temperature followed by a desired rate of cooling;

    youdao

  • 模具淬硬钢高速铣削加工既可以保证加工表面的质量,又可以获得较高的生产效率。

    High speed milling of hardened mould steel can not only ensure the quality of the surface that has...

    youdao

  • 主要论述了磨削淬硬零件的表面特性及磨削参数对磨削淬硬层深度的影响以及在工业中应用的可行性。

    The surface characteristic of the grinding hardening parts and effect of grinding parameters on the hardness penetration depth and the new process industrial application will be illustrated in detail.

    youdao

  • 主要论述了磨削淬硬零件的表面特性及磨削参数对磨削淬硬层深度的影响以及在工业中应用的可行性。

    The surface characteristic of the grinding hardening parts and effect of grinding parameters on the hardness penetration depth and the new process industrial application will be illustrated in detail.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定