检验设备完善，有磁粉探伤机和硬度计。
Improve the testing equipment, magnetic detection machines and hardness.
超声硬度计是一种普适的无损测试仪器。
The ultrasonic hardness tester is an versatile nondestructive tester.
额头和脸颊皮肤的硬度通过硬度计进行测定。
The skin firmness or rigidity was measured at the forehead and the cheek with a device called a durometer.
同时用维氏硬度计测量了合金的时效硬度变化。
The hardness was measured before and after the ageing treatment.
硬度计：用来量度弹性材料如胶布的硬度的仪器。
Durometer: Instrument for measuring the hardness of a resilient material, such as rubber blanket.
实验证明，该算法满足对布氏硬度计压痕直径的测量要求。
The experiment has proved that the algorithm can satisfy the need of the indentation diameter measurement.
本文首次使用邵氏硬度计测量了62眼老年性白内障晶体核。
We measured 62 nuclei of senile cataract by Shaos durometer.
型洛氏硬度计具有性能稳定，结构牢靠、安全，操作方便等特点。
This tester is a popular type Rockwell hardness testing machine, the construction is firm and reliable and safe, operating convenience etc. characteristics.
还有完善的理化检验设备，金相显微镜、万能性试验机、台式硬度计。
There are sound physical and chemical inspection equipment, optical microscope, universal test machine, desktop sclerometer.
公司还拥有硬度计、金相显微镜、力学性能实验机，无损探伤等设备。
The company also owns hardness, metallographic microscope, the mechanical properties of aircraft, non-destructive flaw detection equipment.
A 型邵氏橡胶硬度计适用于橡胶。塑料及类似硬度材料的硬度测定。
Shore A durometer use for testing the hardness of flexible materials such as rubber and plastics.
电子双数显拉簧、压簧、扭簧测试仪器、投影仪、硬度计、盐雾测试机等。
The company provides electronic double-digital display tension spring, compression spring, torsion spring testing device, prijector, sclerometer, and salt spray tester.
采用金相显微镜和硬度计研究了多层熔覆对激光熔覆层微观组织和硬度的影响。
The influences of multilayer cladding on the microstructure and hardness of laser-clad layers were studied by metallographic microscope and hardometer.
纸箱、纸板耐破度仪、炉温跟踪仪、涂层测厚仪、硬度计、高度规等测试仪器。
Cartons, cardboard resistance broken meter, temperature tracker, coating thickness gauge, hardness and a high degree of regulation, and other devices.
从测试汽轮机螺栓硬度的实践出发，分析了影响里氏硬度计测量值的几个因素。
Based on practices of turbine bolts hardness test, the factors influencing HL-hardness test results are discussed.
室温下使用维氏硬度计研究了硅单晶表面的接触损伤及硅单晶中杂质对表面损伤的影响。
The contact damage and fracture property of silicon single crystal are investigated at room temperature by indentation, as well as the influence of the intended and unintended impurities.
借助EPMA，XRD和显微硬度计测定了熔覆涂层的化学成份、显微组织和显微硬度。
The composition, microstructure, and hardness of the ceramal layer were analysed with the help of EPMA, XRD and a microhardness measuring instrument.
通过现场试验，以硬度计检测复检确认了金属材料分选仪的可靠性，并进行靶场退壳试验。
Through field test, the reliability of metal material separation is affirmed by sclerometer testing repetition measurement. Moreover, ejection experiments are made in shooting range.
本文从理论和实践的两个角度，论述了D型湿砂型表面硬度计的设计思想，定型设计方案。
The ideal of the design and finalized programme of the type-D green mold hardness tester are expounded by the theory and the experiments.
针对测量领域深孔表面洛氏硬度测量存在的问题，研制了一种便携式微控表面洛氏硬度计。
As for the problem of surface Rockwell hardness measurement of deep hole in measurement field, this article develops a kind of portable micro-control surface Rockwell apparatus.
硬度计还可根据用户特殊要求配制摄影装置，配制后能对所测压痕和材料金相组织进行拍摄。
The hardness tester is also equipped with photographic device which may take photo for all measured indentation and the metallographic formation of materials.
利用光学显微镜、扫描电镜、显微硬度计及X射线衍射仪分析了高氮奥氏体的等温分解过程。
Employed by optical microscope, scanning electron microscope, microhardness tester and X ray diffraction instrument, the isothermal decomposition process of high nitrogen austenite was investigated.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
测定磨具硬度的方法，较常用的有手锥法、机械锥法、洛氏硬度计测定法和喷砂硬度计测定法。
Abrasive hardness measurement method, more commonly used are hand-cone method, mechanical cone method, Rockwell hardness tester hardness measurement method and blasting assay.
利用光学金相显微镜、显微硬度计、电子探针及X射线衍射分析仪初步探索其中温回火转变过程。
Optical metallographic microscope, micro-hardness tester, electron microprobe and X-ray diffraction analysis were applied to explore the process of intermediate temperature tempering transformation.
利用光镜、显微硬度计研究了铬含量对低碳合金钢组织、硬度、冲击韧度及耐均匀腐蚀性的影响。
The influences of chromium content on the hardness, impact toughness and corrosion resistance of low carbon alloy steel were studied using om and hardness tester.
利用显微硬度计、金相显微镜和X射线衍射仪测定了渗氮层的硬度梯度、层深、显微组织和相组成。
The hardness gradient, depth, microstructure and phases of nitrided layers were measured with Microhardness Apparatus, Microcopy and X-ray diffractometer.
结果表明，硬度实验类似于压缩实验中的镦粗，硬度计压头可使金属基体发生塑性变形及粘性流动。
It demonstrated that the experiment of hardness is likely to upset in the experiment of compression. Hardness tester indenter make matrix metal plastic deformation and viscous flow happen.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
应用推荐