碳纤维或石墨碳纤维已经被开发制作各种各样的产业用纺织品，并且也可以制作某些服用织物。
Carbon or graphite fibers have been developed for use in various types of industrial textiles and in some types of consumer goods.
研制了以石墨碳纤维吸附物质为代表，作为简单、耐用且性能优良的固相微萃取装置的吸附基质。
A simple and durable solid - phase microextraction (SPME) device with excellent function was made using carbon fiber as an alternative adsorbent.
一个由材料科学家和物理学家组成的研究小组宣称，石墨烯具有取代制造飞机的复合材料中的碳纤维的潜力。
A team of materials scientists and physicists has claimed that graphene has the potential to replace carbon fibres in the composites that are used to build aircraft.
现在我们有机会利用石墨薄膜来制造更轻更牢固的碳纤维，进而让我们的飞机更轻更安全。
Now we have the opportunity to use graphene to make even lighter and stronger carbon fibres and so make our aircraft even lighter and stronger.
激光拉曼光谱(LRS)可用来研究碳纤维和石墨纤维的结构。
Laser Raman spectrum (LRS) were studied on structure of carbon and graphite fibres.
碳材料如石墨、碳纤维、碳泡沫和膨胀石墨，他们都具有高导热系数、低密度和良好的化学稳定性。
Carbon materials, including graphite, carbon fibre, carbon foam and expanded graphite possess the properties of high conductivity, low density and good chemical stability.
与膨胀性石墨相比，如何发挥活性碳纤维和碳纳米管的实际电容效率是目前研究的重点。
The emphasis was put on how to enhance the real capacity efficiency of active carbon fibers and carbon nanotubes as compared to expanded graphite.
碳纤维织物的强度，除了蓝宝石晶须和石墨晶须织物外，比其它任何商业用纤维的织物的强度均高。
Tensile strength of fabrics is higher than any other commercially available fiber except for sapphire whiskers and graphite in whisker form.
采用聚四氟乙烯(PTFE)、石墨、碳纤维(CF)制备出满足实际应用要求的高导热耐腐蚀复合材料。
Composites with high thermal conductivity and corrosion resistance were prepared from PTFE, graphite, and carbon fibre (CF).
加强纤维可以是金属、陶瓷、玻璃或是已变成石墨的被称为碳纤维的聚合物。
Reinforcing fibers can be made of metals, ceramics, glasses, or polymers that have been turned into graphite and known as carbon fibers.
介绍了焦炭、石墨、难石墨化碳及碳纤维、中间相微球等锂离子二次电池用碳负极材料的研究概况。
The cokes, graphites, nongraphitizable carbon, carbon fibers. mesocarbon. microbeads(MCMB)used as carbon anode materials for lithium ion secondary batteries ware presented.
实验结果表明，碳化温度越高，碳纤维的石墨化程度越高。
The results show that the graphltlzatlon extents of carbon fiber increase with the temperature ofcarbonlzatlon.
利用XRD研究了PAN基碳纤维在连续高温石墨化和热牵伸石墨化过程中纤维内石墨微晶沿纤维轴择优取向性的变化。
The changes of preferred orientation of PAN-based carbon fibers during continuous high temperature graphitization and hot stretching graphitization were investigated by X-ray diffraction (XRD).
结果表明，造成碳纤维力学性能低的直接原因可以归结为严重的皮芯结构、芯部组织疏松或有孔洞出现、晶相少且无明显取向、石墨层排列紊乱。
The results demonstrate that the carbon fibers which have serious skin-core structure, few graphite layers which intricately piled up have low mechanical properties.
通过掺入炭黑、石墨和碳纤维可改善沥青混凝土的导电性能。
The conductive behavior of asphalt mixture can be improved by adding carbon black, graphite and carbon fiber.
使用国产聚丙烯腈基碳纤维进行石墨化实验，制备高模量的碳纤维。
Graphitization experiments are carried out on PAN-based carbon fibers manufactured in China to prepare high modulus carbon fibers.
炭黑的吸油性、石墨的润滑性及碳纤维的分散性分别限制其在导电沥青混凝土的应用。
The absorbing oil nature of carbon black, the lubricated effect of graphite and the bad dispersion of carbon fiber limit their application in ECAC respectively.
用石墨、膨胀石墨、碳纤维三种不同的炭系填料制备了既环保、又具有比一般涂料更优异的性能的水性叔氟导电涂料。
A kind of environmentally friendly waterborne tert-fluoro electroconductive coatings with more excellent performances is prepared with graphite, expansible graphite and carbon fiber respectively.
论述了催化剂种类、含量及石墨化温度三因素对碳纤维催化石墨化反应的影响。
The effects of heat-treated temperature, the catalyst types and relevant content on carbon fiber catalytic graphitization are discussed in detail in this paper.
本产品采用高碳石墨经化学处理，高温膨胀与玻璃纤维、金属丝、碳纤维等材料复合后经编织、整型而成。
The product is woven and carded from high carbon graphitetreated by chemical way and expanded in high temperature, glass fibre, metal silk, carbon fibre, etc.
文章研究了碳纤维-石墨-银基复合材料的制造并应用于雷达电刷传输电讯号。
In paper, the fabrication of carbon fiber-graphite-silver matrix composite and its application in radar electric brushes to transmit signals have been studied.
综述了用于锂离子电池负极的石墨材料的修饰与改性方法，所研究的石墨材料包括天然石墨、人造石墨和石墨化碳纤维。
Modifications of graphite materials for negative electrode of lithium ion batteries were reviewed. Natural graphite, artificial graphite and graphitic carbon fiber were discussed.
利用碳纤维布和铜粉、钛粉、石墨粉等为原料，采用热压成型、烧结等工艺制备三维网状铜一碳复合受电弓滑板。
The three-dimensional network copper-carbon composite pantograph was obtained by hot pressing and sintering with carbon fiber, copper powder and titanium powder, and graphite powder as raw materials.
碳纤维石墨化的关键是石墨化设备和高温热处理技术。
The graphitization apparatus and high temperature heat treatment are the key points in the manufacture of carbon fiber.
碳纤维石墨化的关键是石墨化设备和高温热处理技术。
The graphitization apparatus and high temperature heat treatment are the key points in the manufacture of carbon fiber.
应用推荐