本法适用于钨原矿中钨的物相分析。
This method is applicable for phase analysis for raw tungsten ores.
水泥熟料X射线定量物相分析方法的对比研究。
Comparative study on X-ray methods for quantitative phase analysis of cement clinker.
金相图象特征信息提取是进行金相分析的关键。
The extracting features of metallography is the key to metallographic analysis.
本文研究了一个新的铬化合物的化学物相分析方法。
A new method of chemical phase analysis for the chromium compounds was presented.
介绍了石灰岩中游离二氧化硅的化学物相分析方法。
A method for chemical phase analysis of free silica in limestone was discussed in this paper.
金相分析结果为寻求提高刀片寿命的途径指明了方向。
The result of microstructure analysis gives the direction of increasing the service life of cutter.
矿石中钨的物相分析通常只分析钨华、白钨矿和黑钨矿。
In ordinary chemical phase analyses of tungsten only tungstite, scheelite and wolframite are dealt with.
地震震相分析是地震学研究中最基本、也是最基础的工作。
Seismic phase analysis is the most fundamental and basic work in seismological research.
本文提出了通用的无标样X射线衍射定量相分析的新方法。
In this paper, a new general method of X-ray quantitative phase analysis without standards is presented.
模型震相分析是超声地震模型实验研究中的一项基础性工作。
Model phase analysis is the basic work of supersonic seismic model experiment.
地震相分析是指根据地震属性对地震相单元进行识别和作图。
The analysis of seismic facies means identification and mapping for seismic facies unit on the basis of seismic attributes.
本文以金相分析与断裂力学方法研究了主蒸汽管道蠕变破裂过程。
In this paper, the fracture process in creep of main steam pipeline is studied by metallographical and fracture mechanics.
把地震属性技术和地震相分析技术应用于煤层冲刷带的解释工作中。
Both seismic attribute technique and seismic facies analysis were used in the interpretation of coal erosion zones.
通过金相分析方法对RE多元复合孕育剂的孕育强化机理进行研究。
The strengthening mechanism of re multi-compound inoculation has been studied by using the method of metallurgical analysis.
采用热重分析和岩相分析等方法，对复杂煤种的燃烧特性进行了评价。
By adopting the analytic methods such as thermal-gravimetric analysis and petrographic analysis, an appraisal research on burning characteristics of the composite coal is made.
对泰国复杂高岭土矿样的物相分析表明影响其白度的主要杂质为含铁矿物。
Mineral Composition analysis to the kaolin sample indicates that main impurities affecting its whiteness are iron-bearing minerals.
本文对分银渣进行了成分和物相分析，确定了回收利用有价金属工艺流程。
This paper analyzed the composition and chemical phase of silver separated residue and confirmed the technologic flowsheet of recovering value metal.
对CSP生产的低碳微钛高强度钢进行了化学相分析和高分辨率透射电镜的观察。
Using chemical phase analysis and high resolution TEM analysis, HSLC steel with microalloyed Ti produced by CSP was studied.
通过对进口切粒机动刀材质硬度分析和金相分析，确认其可使用的最小外圆直径。
Through analyzing material hardness and metallography of moving knife of import cutter, its minimum round diameter outside used is confirmed.
通过对红花生物礁露头的精细解剖和微相分析，研究了礁的内部构成和成礁模式。
A detailed study of internal architecture and reef-forming model of Honghua reefs has been conducted by outcrop observation and microfacies analysis.
定量金相分析表明，密度分布不均是由于钨相在烧结试样行进方向上分布不均所致。
The quantitative metallographic analysis of the plates indicated that the decreasing amount of W particles contributed to the decreasing density of the plates.
通过牙形石生物相分析，推断温古尔地区中二叠世早期可能为盆地相较深水沉积环境。
Based on an analysis of the conodont biofacies, it is inferred that there was probably a deep-sea basin facies sedimentary environment in the Wenguer area during the early Middle Permian.
针对制氢转化炉炉管多次开裂失效的情况，进行了宏观分析、化学分析以及金相分析。
The macro, chemical and metallographic analysis have been performed on the cracking failures of reformer tube for hydrogen generation.
因此，确定电解浸蚀法作为铜铬稀土合金定量金相分析的试样制备方法是切实可行的。
Consequently, it is feasible to determine electro-etching method as the sample preparation method about quantitative metallographic analysis in CuCrRE alloy.
根据腐蚀产物的物相分析结果，提出腐蚀机理的假说及防止运行中再次发生腐蚀的办法。
The XRD analysis of the corrosion product was made and a hypothesis about corrosion mechanism and some preventive measures were proposed.
通过电镜、能谱分析、金相分析等手段对H13钢制风机叶轮模坯开裂进行了综合分析。
Cracking of H13 steel die blank for fan impellers was analyzed by means of SEM, EDS and metallographic microscope.
采用化学分析、金相分析以及扫描电镜分析等试验方法对某减震器连杆断口进行了分析。
The fracture of Piston rod of the absorber was analyzed by means of chemical composition analysis, microstructure examination and the scanning electron microscope (SEM).
实验室工作人员和我们的内部金相实验室的设备也扩大到包括切割，抛光，腐蚀和金相分析。
Laboratory staff and our in-house metallographic laboratory equipment are also expanded to include cutting, polishing, corrosion and metallographic analysis.
本文采用热酸浸蚀试验，化学成份分析和金相分析等手段，对45钢轴所出现的发纹进行分析。
The hair lines of 45 steel driving axle when quenching and tempering was analysed by heat etching, chemical analysis and metallographic.
本文采用热酸浸蚀试验，化学成份分析和金相分析等手段，对45钢轴所出现的发纹进行分析。
The hair lines of 45 steel driving axle when quenching and tempering was analysed by heat etching, chemical analysis and metallographic.
应用推荐