然后基于实验研究,并结合三维全波电磁仿真软件在频域和时域对通孔结构性能进行分析。
And then, based on experiments and combined with three-dimensional full-wave electromagnetic simulation software, the frequency domain and time domain performance of the through-hole via is analyzed.
用仿真软件对这两个滤波器进行了电磁仿真,用软件的优化模块对滤波器结构进行了优化,使所设计的滤波器满足性能指标。
By the optimization modules of electromagnetic simulation software, optimize the filter structure, so that the designed filter to meet performance targets.
为了验证本文所做的工作,文中给出了多个滤波器设计实例,并且运用电磁仿真软件进行仿真设计,较好的仿真结果证明了文中方法的有效性。
In order to verify the work in this dissertation, some design examples are given and simulated with some electromagnetic softwares. Good simulation results state the validity of these methods.
阐述了输电线电磁暂态仿真在现代电力系统分析中的作用和意义,对研究内容和方法进行了介绍。
The function and significance of electromagnetic transients simulation for transmission line in modern power system are clarified and the research contents and methods are introduced.
虚拟现实系统和计算机仿真系统中广泛采用电磁跟踪系统测量用户的头部或手部的位置和姿态来实现人机交互。
Electromagnetic tracking systems are widely used in Virtual Reality and computer simulation system to measure the attitude and position of the users hand or head to perform Human-Computer Interaction.
仿真结果表明,该方法能够克服开口波导法在某些数值点的奇异性,能有效地预测出对应的电磁参数。
The results of the simulation show that the method can overcome the singularity of open-ended waveguide method and can effectively predict the electromagnetic parameters of the materials.
该文从软件开发的角度出发,提出了一种解决电磁暂态实时仿真问题的分网并行算法。
In this paper, a new method named "node-splitting algorithm" is presented to deal with the power system electromagnetic transient network partition and parallel simulation.
基于大型电力系统分析软件NETOMAC,提出了机电暂态和电磁暂态混合时域仿真法。
A hybrid time-domain simulation method integrating electromagnetic transient simulation and electromechanical transient simulation based on large power system analysis software NETOMAC is proposed.
其次,以前步分析结果为基础,采用“场路混合法”对迎击式交流接触器电磁机构的动特性进行了仿真。
Secondly, on the basis of previous analysis results, this paper makes a emulation program of electromagnetic mechanism dynamic characteristics, combining with the magnetic circuit method.
简单介绍了电磁作动器的数学模型,通过仿真分析与试验分析了解了作动器的作动特性。
The mathematic model of electromagnetic actuator was introduced briefly, and the performance of actuator was understanded with simulation analysis and test analysis.
该文阐述了雷达电子战系统电磁环境仿真的基本概念以及建立典型电磁环境应遵从的准则。
This paper first introduces the concepts of electromagnetic environment simulation for radar EW system, then proposes several rules of designing typical electromagnetic environment.
工程师可以使用工具来进行天线,全球定位系统,以及各种无线应用的3 - D电磁模拟和RF电路仿真。
Engineers use the tools to conduct 3-D electromagnetic simulations and RF circuit simulation for antenna, GPS, and various wireless design applications.
对计算机并行处理技术在电磁暂态仿真计算中的应用进行了初步分析,并描绘了一种适合于并行计算的算法。
This paper presents a basic analysis on the application of electro magnetic transient simulation with computer parallel processing technique and describes an algorithm of parallel processing.
依据电磁场理论,直接从三元组出发推导了射频仿真系统目标视在角位置方程。
Based on the theory of electromagnetism, the equations that determine the direction of the simulation target in RFSS (Radio Frequency simulation System) are derived.
通过仿真,本文优化设计的谐振式湿度测量传感器具有良好的高频电磁性能和气动性能。
With the help of simulation, the optimally designed resonant cavity type wetness sensor has acquired good high-frequency electromagnetic as well aerodynamic characteristics.
介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关,并对其总体结构进行了设计与仿真分析。
A new polyimide (PI) -cantilever MEMS optical switch of electromagnetic actuation is proposed, and the structure of the optical switch is designed and simulated.
针对舰船目标尺寸巨大、形状复杂、电磁设备繁多的特点,选取并行多层快速多极子技术来模拟仿真其电磁环境。
Electromagnetic environment of ship, an extremely large complex target with various electromagnetic equipments, was simulated by parallel multi-level fast multipole algorithm (MLFMA).
能实现线缆在系统环境下受到电磁辐照时的线缆感应电压和电流的仿真分析(RS分析)。
Can carry out simulation and analysis (RS analysis) on cable's induction voltage and current when the cable is under electromagnetic irradiation under system condition.
电力系统混合仿真对常规电力系统进行机电暂态仿真,对重点关注的局部网络或者特定元件采用电磁暂态仿真。
In power system hybrid simulation, the mutual influence between the electromechanical transient process and electromagnetic transient process can be synthetically considered.
本文将直流偏磁现象与电磁场计算有机地结合在一起,对变压器在不同直流偏磁下的运行性能做了仿真和分析。
The phenomenon of DC magnetic bias analysis and electromagnetic field calculating are combined in this paper and the running performance is simulated with different magnetic bias DC.
在SIMPLORER中搭建了逆变器供电式三极电磁轴承的磁悬浮控制系统,仿真结果验证了所设计的控制系统的正确性。
And then we build the inverter-fed three-pole AMB control system in SIMPLORER, the performance of the control system is verified by the simulation.
我们行业领先的电磁场、电路、系统和多物理仿真软件能够将设计过程完全实现自动化,便于您更好地理解您产品的表现。
Our industry leading electromagnetic field, circuit, systems and multiphysics simulation software fully automates the design process so you can better understand how your products behave.
基于正交和随机方法安排了有限元仿真试验,获得了用于非线性电磁建模的样本空间。
To obtain sample space used to establish the nonlinear regression model, the FEM simulation tests were arranged with the methods of orthogonal and random experimental design.
介绍了三相异步电动机的直轴和交轴模型的建立方法,并利用MATLAB语言对两种模型进行仿真,仿真数据包括定子电流、电磁转矩以及转速。
Introduces a constituting method for A-axis and D-axis models of three-phase asynchronous motor. Simulating for those two models by MATLAB language.
介绍了三相异步电动机的直轴和交轴模型的建立方法,并利用MATLAB语言对两种模型进行仿真,仿真数据包括定子电流、电磁转矩以及转速。
Introduces a constituting method for A-axis and D-axis models of three-phase asynchronous motor. Simulating for those two models by MATLAB language.
应用推荐