准确的定位和控制由伺服电机编码器。
The positioning and accuracy are controlled by encoders from servo motors.
研究了分别以电机编码器和速率陀螺输出信号作为速度环反馈时,系统输出的跟踪特性。
The article also studied the tracking quality in which the system has used the motor encoder and the velocity gyro as the velocity loop feedback respectively.
据称M9可作为直接替代大多数惠普HEDS - 5xxx在不增加电机编码器或电缆的变化。
The M9 may be used as direct replacements for most Hewlett Packard HEDS-5XXX encoders with no changes to the motor or cable.
阶段具有千分尺等级螺钉以及0.5毫米的引脚间距的特点,微型直线轴承和非接触式限位开关带有,任一步进机或直流伺服电机编码器的选择。
Stage features micrometer grade screw with lead pitch 0.5 mm, miniature linear bearing and non-contact limit switches with a choice of either stepper or DC servo motor with encoder.
全部都可以用来识别和监测电机的速度或确定编码器脉冲计数。
All can be used to identify and monitor motor speeds or determine pulse counts of encoders.
自从大电机式轴承整个编码器游戏机,该单位可以容忍相当大轴的运动。
Since the entire encoder rides on large motor style bearings, the unit can tolerate considerable shaft movement.
电机与闭环应用提供可选的编码器。
Motors available with optional encoder for closed loop applications.
目前常用的伺服电机是交流伺服电机,在电机的轴端装有光电编码器,通过检测转子角度用以变频控制。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
套件包括安装板安装到安装法兰或伺服编码器和硬件,使之与5PY区盛德发电机互换。
Kits include mounting plate and hardware for mounting to flange or servo mount encoders, making them interchangeable with 5PY DC tach generators.
采用高分辨率的增量式光电编码器和相应的硬件接口电路,实现了变磁阻电机转子在定子两个齿之间位移的检测。
Using an optical incremental encoder and hardware interface, the position of the motor rotor between the two teeth of the motor stator is measured.
该驱动器从编码器中读取电机数据。
该运动控制卡能同时采集四轴的编码器脉冲信号,输出四路模拟电压控制伺服电机,同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
调平机构部分,用三相混合式步进电机替代原有的交流电机,位置反馈部分,用编码器替代高精度电位器,这样构成了一个半闭环系统。
About the mechanism of adjusting crossbeam balance, the three-phase blend stepping motor take the place of the A. C. motors, the coder as a feedback device, then make up of a closed-loop system.
该系统采用光电编码器作为速度检测传感器,控制方式采用PID数字控制,控制输出采用PWM数字信号至驱动电路对电机调速。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
电机分别与旋转式编码器和扭矩检测器相连接。
A rotary encoder and a torque detector are attached to each motor.
所述的称重传感器(5)、驱动数字伺服阀的步进电机以及数字阀(1)上的编码器(10)分别通过信号线路与所述的PLC(7)连接。
A weighing sensor (5), the stepper motor driving the digital servo valve and the coder (10) on the digital valve (1) are respectively connected with the PLC (7) by signal circuits.
通过变频器、交流伺服电机、行程光电编码器等设备组成了行程控制系统,实现了可移动台架位置的精确控制。
Travelling control system is composed of a transducer, an AC servo motor, an optical encoder and other components, which achieves precise control of the movable bench's position.
电机可以被工厂安装的光学或磁性编码器来命令,也可以与机电的故障保护关机制动系统相符合。
Motors can be ordered with a factory-mounted optical or magnetic encoder and can also be fitted with electro-mechanical fail safe power off brakes.
常用的伺服电机是交流伺服电机,在电机的轴端装有光电编码器,通过检测转子角度用以变频控制。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
系统采用CPU驱动直流无刷电机转动,编码器输出的正余弦信号指示电机的位置。
The system with CPU drives the DC brushless motor, and the encoder indicates the motor position outputting the sine and cosine signal.
无电刷电机精确地控制旋转的钻头,它具有可编程编码器,每360度计数超过57,000次。
The brushless motor precisely controls the rotation of the auger, with a programmable encoder that provides more than 57,000 counts per 360 degree revolution.
设计了单片机端的控制程序,包括步进电机控制、编码器数据采集、RS232通讯、键盘读入、液晶显示屏输出等部分。
The controlling program in MCU part is designed, and it includes the part of step-motor controlling, data collection of the coders, RS232 communication, keyboard input, and LCD output.
我国自主开发生产的无编码器永磁同步电机专用变频器近日在苏州通过技术鉴定。
China's own development and production of non-coder permanent magnet synchronous motor inverter dedicated recently passed technical appraisal in Xuzhou.
使用增量式光电编码器测量电机位置的伺服系统中,在电机启动时,普遍存在无法准确测量出电机转轴初始位置的问题。
The inaccurate measurement of initial position of motor rotor when the motor starts is a problem existing in a servo system applying increment photo-electricity pulse coder.
该文研究了电机伺服系统中低分辨率增量编码器超低速测量问题。
In this paper, the ultra-low speed measurement problems were investigated using on the lower resolution incremental encoders.
探讨了PC的串行接口用于光电编码器的脉冲计数和伺服电机控制两种非通信功能的应用。
The COM of IBM-PC applications for the counter of Opt-encoder pulse and the controller of AC -Servo are study in this paper.
本系统由80C196KB/KC单片机、27C64存贮器、光学编码器及外部译码电路、电机驱动电路、限流电路、直流伺服电机等组成。
The system consists of 80C196KB/KC single chip microcomputer, 27C64 memory, optical coder and its external decode circuit, motor drive circuit, current - limiting circuit, DC servo motor etc.
本系统由80C196KB/KC单片机、27C64存贮器、光学编码器及外部译码电路、电机驱动电路、限流电路、直流伺服电机等组成。
The system consists of 80C196KB/KC single chip microcomputer, 27C64 memory, optical coder and its external decode circuit, motor drive circuit, current - limiting circuit, DC servo motor etc.
应用推荐