本文评述了直流电弧放电机理。
The mechanism on direct current arc discharge has been reviewed in this paper.
避雷针的上部表面是否有可见的电弧放电痕迹?
一种新的镀膜技术——电弧放电离子镀研制成功。
A new coating technology, arc discharge ion plating has been developed.
在电极间隙增大时电弧放电柱放大而激发温度升高。
The results show that the relations between the excitation temperature and arc dischargable post under different current and different electrode gap.
论述了引发太阳电池电弧放电的空间环境因素特点。
The characteristics of space environment factors which would induce discharge of solar cells are introduced.
本文用电弧放电等离子体cvd快速生长金刚石薄膜。
Diamond thin films were prepared by arc discharge plasma CVD.
得到电弧放电瞬间每一模型下的电流变化率和电弧电压。
Arc current reducing rate and arc voltage at the time of arc discharging are established for every mathematical model.
推导出电感性本质安全电路低能电弧放电时间的计算公式。
Formulas of discharge time of low energy arc in the inductive intrinsically safe circuits are gained.
本发明公开了一种基于电弧放电法制备单壁碳纳米管薄膜的装置。
The invention discloses a device for preparing single walled carbon nanotube film based on arc discharge.
发现直流电阻性本质安全电路在断开过程中低能电弧放电有三种情况。
It was found that there are three types of low-energy arc discharge during the breaking process of resistive intrinsically safe circuits.
一步法主要包括电弧放电法、熔盐电解法、模板法和热解金属有机物法等四种。
One-step methods consist of arc-discharge method, electrolytic formation techniques, template-assisted method and pyrolysis of organometallic precursors, etc.
实验研究了实现无电弧点火、限制电弧放电所需的电源特性参数及点火结构参数。
In order to initiate the LP without arc formation, effects and coupling of electric pulse characteristics, ignition configuration parameters on LP ignition property are investigated.
纳米碳管的制备方法主要有三种:电弧放电法、激光烧蚀法和有机物催化热解法。
The electric arc method is one of the most important methods in synthesizing carbon nanotubes, in addition to laser ablation method and catalytic decomposition of hydrocarbons.
其结果是一个复合软管,防止火花和电弧放电的危害和电性能满足工业应用要求。
The result is a composite hose that prevents sparking and arc-over hazards and meets the electrical properties requirement of industrial applications.
本文介绍了在14MW电弧加热器系统上进行电弧放电烧蚀发汗效果的试验研究。
This paper describes the experimental investigation reducing the ablation of an electrode in the 14mw arc heater by use of the transpiration cooling.
电弧放电伴随着紫外光辐射,通过探测放电辐射强度可预测其对用电设备的危害程度。
Arc discharges accompany with ultraviolet (UV) radiation. By detecting the radiation intensity of arc discharge the damage degree of arc to electrical equipments can be predicted.
电的最后结果发生时,有电线导体短路(有电弧放电的现象)或电线导体开口暴露的现象。
Electrical end results occur with the shorting together of the cord conductors (evidence of an electrical arc discharge exists) or with the opening of either or both of the cord conductors.
用含有铁族金属硫化物的复合石墨棒作阳极,在氢气氛围下实施电弧放电,制备出了双壁纳米碳管。
Using the composite graphite rods with the sulphide of iron group metals as anode, the double-wall carbon nanotubes have been fabricated by arc discharging under hydrogen atmosphere.
根据液体电弧放电模型可知,电弧的稳定性和碳粒子运动的定向性对纳米结构的生成过程有重要影响。
As shown in the physical model, the stability of arc plasma and the directionality of carbon particles played important roles in the formation of carbon nano-structures.
文中分析了电晕放电、介质阻挡放电和电弧放电并叙述了大气压均匀辉光放电等离子体研究的最新进展。
This article provides the corona discharge, the dielectric barrier discharge, and the arc discharge. The recent efforts to obtain the homogenous atmospheric pressure glow discharge are also discussed.
理论模型较好地描述了毛细管电弧放电过程,为补偿脉冲发电机的参数选择和方案设计提供了理论依据。
The models can be used to explain the discharge process of the capillary and provide theory for the parameters choices and technique design. It showed that the staged power supply...
研究了电火花放电间隙状态判别电路,选择恰当的正常火花放电、电弧放电及空载比例,确定较佳伺服进给量。
The recognition circuit for EDM gap state is researched, selecting proper rate between nomal discharge, arc and blank, defining suitable servo feed.
有些汽车装备了高强度放电前大灯hid,该设备通过其预先设计的电子系统产生的高压电弧放电生成高密度光源。
Some cars equipped with high strength discharge headlights HID, the device through its pre designed electrical system generated high voltage arc discharge generated high density light source.
为了实现这个目标,就需要深入研究液体电弧放电过程中碳纳米材料的生长机理,各种电弧放电参数和外加磁场对其影响。
To achieve this objective, in-depth study is needed on the growth mechanism of carbon nano-materials by arc discharge in liquid and the effect of various arc parameters and external magnetic fields.
本文介绍了空心阴极真空电弧焊接技术的特点及其放电机理,讨论了低气压下空心阴极电弧放电与常规电弧放电的不同特点。
The differences of discharge characteristics between the hollow cathode arc under low pressure and the conventional TIG arc under atmosphere are discussed.
根据电离气体中性化条件,初步探讨了在低气压下空心阴极电弧放电的引弧过程,分析了影响低气压下空心阴极电弧放电引弧电压的因。
Aslo the paper has dealed with the mechanism of the hollow cathode vacuum arc discharge and analyzed the starting arc process according to the neutralizing theory of ionized gas.
针对富勒烯科学所面临的这些问题,本论文通过在石墨电弧放电反应中引入氯源,进行了一系列的有关氯参与下合成富勒烯的实验,重点考察了氯对富勒烯形成的影响。
In this thesis, a series of experiments involving chlorine were carried out in a graphite arc-discharge reactor and the study focus on the influence of chlorine on the formation of fullerenes.
静电放电在飞船和云层中形成电弧然后消失。
静电放电在飞船和云层中形成电弧然后消失。
应用推荐