改性复合材料的球晶明显变小。
The small size of spherulite was formed in modified nanocomposites.
球晶的线生长速率随mmt增加而趋于降低。
With increasing the content of MMT the growth rate of MMT is decreased.
硬石膏的加入使得球晶尺寸减小，数量增加。
The anhydrite caused spherulite size of PP diminishing, the quantity increasing.
混合球晶则是正常球晶与异常球晶叠加的结果。
The mixed one is assumed to be the superimposition of the normal and abnormal ones.
该酸解淀粉经过溶解和冷冻重结晶制备得到了淀粉球晶。
The starch spherocrystals were prepared by dissolution and freezing recrystallization of the acid-hydrolyzed starch.
结果表明，分子链刚性越大其结晶性和球晶的完善性越高。
Results indicate that the crystallinity of materials increases with increasing the molecular chain rigidity.
DSC和偏光显微镜测定表明，它们是球晶较大的结晶性高聚物。
The products were characterized by IR, DSC as well as PLM and found that they were crystalline with large size spherulites.
由SEM照片可以看出，球晶结构相当完善，突出地显现出球晶生长的“骨骼”结构。
From these pictures one can see the perfect spherocrystal structure of PP and the growing skeleton of the spherocrystal.
POM表明，共混物中的PHB球晶形态产生显著变化，球晶尺度减小，且二次结晶被抑制。
It was discovered by POM that spherulitic morphology of PHB in the blend changed significantly, size of the spherulites decreased and the secondary crystallization of PHB was inhibited also.
采用SALS等方法研究了低硬段含量的聚酯-聚醚多嵌段共聚物中硬段结晶时的球晶生长规律。
The spherulite growth behaviour of hard segment has been studied by SALS and other techniques for polyester-polyether block copolymers with low hard segment content.
利用偏光显微镜，对高聚物(PP,PS和PE)在不同条件进行熔融结晶时的球晶进行了研究。
Spherulites of some polymers such as PE, PP and PS during melting crystallization under different conditions are studied by means of polarized microscope.
由电 镜和偏光显微镜研究的凝胶形态学表明，凝胶中存在由相互缠结的三维纤维网络构 成的球晶。
The studies of polarized optical microscopy and TEM indicate the formation of spherulites undergoing aggregation of self-assembled fibers.
枝晶向球晶转变可以明显改善矿渣微晶玻璃的性能，而球晶向块状晶体的转变则恶化了微晶玻璃的性能。
The transformation from the branch to the ball could improve the properties of glass ceramic, and the transformation from the ball to the block could worsen the properties of glass ceramic.
本文用小角激光散射仪考察了PET和PBT变态球晶的形成条件，采用模型法分析了变态球晶的内部结构。
In this paper, the conditions resulting in the unusual spherulites of PET and PBT were investigated by small Angle laser scattering instrument.
方法采用固体分散载体和阻滞性高分子材料，使用固体分散与球晶制粒相结合的技术制备水飞蓟宾缓释微球。
Methods Sustained-release silybin microspheres were prepared by the spherical crystallization technique with solid-dispersing and release-retarding polymers.
结果表明：用马来酸酐接技聚丙烯与WD 52偶联剂处理过的填充体系综合性能最优，并使PP球晶细化。
The results showed: the comprehensive properties of the composite processed with ppg-MAH and WD-52 was excellent and made the crystal fine.
众所周知，片晶是高分子晶体的一种基本形态，由高分子本体结晶得到的最为常见的球晶事实上是片晶堆积而成的。
As is known to all, slices of polymer crystals crystal is a basic form, made of polymer ontology crystallization of the most common spherulite get fact is formed from the accumulation of tablet chip.
偏光显微镜结果表明，HSPS的加入对共混物中PA1010的结晶形态有明显影响，使PA1010球晶细化且不完善。
It was observed from the POM that HSPS had great effect on the crystalline form of PA1010 in the blends, causing the spherulite of PA1010 smaller and less perfect.
采用着色腐蚀技术，金相显示了球墨铸铁缩松区中奥氏体枝晶组织形貌，分析了球铁缩松的形成机制。
The morphology of austenite dendrites in shrinkage porosity in nodular iron is displayed by the color etching technique and the formation mechanism of shrinkage porosity has been analyzed.
发生器形态的白晶通过你圣坛上述每一矿石球来合成三重球体能量流程。
The clear generators form the synthesis of the triple sphere energy movement coming through each of the above spheres upon one's alters.
发晶球和虎眼石球掌握光之语中无条件统御的振动，和整个音阶的10个基础音符。
Rutilated quartz and tigers eye holds the vibration of Non-Conditional Governance in the Language of Light, or the 10th of the base notes of the entire scale.
哇哦，好老的记忆晶球，不知道还能不能播。
不同球磨条件下的产物含有的非晶相的晶化温度比单一非晶相合金的晶化温度稍高，并且与球磨条件以及成分的关系不大。
The crystallization temperatures of amorphous phases in the products are higher than those of amorphous alloys with single phase, and hardly independent of the milling conditions and the composition.
模拟结果符合亚共晶球铁的一次结晶过程；
The result of the simulation is in accordance with the crystallization process.
此非晶合金的形成是晶粒细化、球磨过程中的缺陷和应力等多种作用的结果。
The amorphous forming relates with variety of the crystal size, defect and stress during ball milling.
此非晶合金的形成是晶粒细化、球磨过程中的缺陷和应力等多种作用的结果。
The amorphous forming relates with variety of the crystal size, defect and stress during ball milling.
应用推荐