提出了一个钢坯爆炸焊接的计算模型。
A calculation model is proposed for explosive cladding of steel billet.
简述了金属爆炸焊接的过程和它的金属物理学本质。
The course of metal explosive welding and its essence of metal physics was described.
简述了金属爆炸焊接的过程和它的金属物理学本质。
The process of metal explosive welding and its essence of metal physics are introduced.
在爆炸焊接中,爆炸焊接参数的确定是非常重要的。
The welding parameters are very important in the explosive welding.
讨论了爆炸焊接、爆炸复合材料与表面工程的关系。
The relationship between detonation welding, detonation composite materials and surface engineering was discussed in this paper.
综述了爆炸焊接新技术在超导材料焊接中的一些应用。
Some applications are described in a new process of explosive welding for the superconducting materials.
同时简单介绍了熔体水淬法、爆炸焊接法等制备技术。
Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.
是行业标准《压力容器用爆炸焊接复合板》编委单位之一。
It is one of editorial units in industry standard at "Explosion clad plate for pressure Vessel".
这两种力学性能指标在爆炸焊接中的作用和影响是不一样的。
The effects and influences of these two kinds of mechanical properties are different in explosive welding.
介绍了对称碰撞爆炸焊接的实验方法,总结了它的实际应用。
The experimental research on explosion welding through symmetric collision was conducted and new app-(lications) proposed.
爆炸焊接界面附近温升是由爆炸绝热压缩和畸形变形能沉积两者造成的。
The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition.
研究了不同热处理温度对爆炸焊接复合钢板结合界面组织和性能的影响。
The influence of heat treatment temperature on the binding interface morphology and properties of explosive cladding steel plate was studied.
探讨了爆炸焊接和爆炸复合材料轧制的机理。叙述了这种复合材料的用途。
The mechanism of explosive welding and rolling of the composite slab is described.
通过分析爆炸焊接工艺特点,研究了爆炸焊接工艺在制造高炉风口处的应用。
The characteristic of detonation welding process was analysed, and the application of detonation welding process to the blast furnace tuyere was investigated in this paper.
指出了爆炸焊接技术领域中存在的尚未解决的问题,并提出了对这些问题的看法。
The problems, which have not resolved, are pointed out. Opinions about these problems are put forward.
在爆炸焊接的过程中,结合区一薄层基体金属,在高温下将发生熔化、熔解或化合。
A thin layer of fusion zone is fused and compounded at the high tem" perature in explosion welding process."
提出了解决爆炸焊接中边界效应问题的三条措施,并说明了各自的适用条件和优缺点。
Three measures to solve the problems of boundary effect in explosive welding are put forward and their application conditions, advantages and disadvantagess ave illustrated respectively.
根据两种材料的物理性质确定爆炸焊接窗口,从而确定单位面积药量的最大值和最小值。
According to physics performance of two melts, this paper determines the explosive welding window, then obtaines the maximium and the minimium value of explosive weight on per area.
对铝-铝同质金属爆炸焊接进行系列实验,研究不同装药比条件下焊接界面的变化特征。
A series of Al-Al explosive welding experiments were carried out to investigate the morphology characters of welding interface under the condition of different charge ratios.
在非晶薄箔的多层爆炸焊接中,箔的表面在一定的滑移爆轰速度下会出现规则的波纹形状。
In multilayer explosive welding of amorphous foils, the regular ripple shape geometry may appear on the surface of foils under certain grancing detonation velocity.
边界效应是爆炸焊接普遍存在的问题,如何消除边界效应是提高爆炸焊接复合质量的关键。
Border effect is a common problem existing in explosive welding, how to eliminate the effect becomes one of the key technologies of improving the welding quality.
本文主要介绍了爆炸焊接不锈钢复合板中两种隐蔽性缺陷的形态、分布规律以及超声波检测。
This paper introduced the distribution and pattern of two conceal defects in explosive welding stainless clad steel plate and their ultrasonic inspection.
通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析,提出不等厚度布药的新工艺。
The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.
用比拟的方法分析和计算了爆炸焊接条件下,爆炸复合材料结合区中塑性变形金属的动态屈服强度值。
This paper analysed and calculated the dynamic yielding strength of plastic deformed metal in the bonding zone of explosive welding composite material in the condition of explosive welding.
现拥有各类专业技术人员10多名,具备着精湛的爆炸焊接工艺技术与加工技术能力和超常的工作效率。
Now has more than 10 professional and technical personnel, with a superb explosion welding technology and process technology capabilities and extraordinary efficiency.
通过爆炸焊接过程的闪光X射线摄影,测得了飞板弯折角。其数值与半圆柱试验测得的飞板弯折角基本上相一致。
The bend Angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test.
波状界面是爆炸焊接的一个重要特征,利用弹塑性材料的二维有限差分方法模拟爆炸焊接中的波状界面结合过程。
In this paper, simulation is made of the processing of wavy interface generation in explosive welding using a two-dimensional difference scheme for elastic-plastic materials.
波状界面是爆炸焊接的一个重要特征,利用弹塑性材料的二维有限差分方法模拟爆炸焊接中的波状界面结合过程。
In this paper, simulation is made of the processing of wavy interface generation in explosive welding using a two-dimensional difference scheme for elastic-plastic materials.
应用推荐