这些商业用的聚酰胺在熔融纺丝过程中十分稳定。
Those polyamides used commercially are sufficiently stable to be spun from a melt.
纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。
Spinning box is an important part of the melt spinning machine for synthetic fibre.
采用高速熔融纺丝法制备了抗菌PETPOY纤维。
The antibacterial PETPOY fiber was spun by high-speed melt-spinning method.
该方法适宜于熔融纺丝法改 性涤纶的规模化连续生产。
The invention can apply the mass continuous production of fusion spinning modified terylene.
首先,用向上熔融纺丝和拉伸致孔法制得聚乙烯中空纤维膜。
At first, we produced the polyethylene microporous hollow fiber membrane by ascending melting filature and made micropore by drawing.
结果表明:PGA和PLLA在熔融纺丝时,没有发生反应。
The results showed that no esterification occurred during the melting spinning of PGA and PLLA.
将导电炭黑混入到热塑性聚氨酯中,经熔融纺丝制得导电纤维。
Carbon black was blended into thermoplastic polyurethane, the electrical conductive fiber was obtained by melting spinning.
摘要根据熔融纺丝的基本原理,推导了扁平纤维的动力学模型。
According to the basic principle of melt - spinning, the dynamic model of flat fiber was deduced in detail.
阐述了适于弹性纤维熔融纺丝的聚合物聚氨酯和聚醚酯的结构特点;
The structural characteristics of the polymer feedstock, polyurethane and polyether ester, practicable for elastic fiber melt spinning were described.
为采用高速熔融纺丝法应用纳米抗菌PET复合材料提供了实验数据与理论依据。
The results provide a basis for the application of high speed melt spinning to nano-antibacterial PET composites.
本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。
The influences of formation condition and draw ratio in melt spinning on the hollowness of Circular cross section hollow polyester fiber are studied.
建立了弹性纤维熔融纺丝的动力学模型,并利用计算机模拟探讨了其纺丝动力学过程。
A model on Melt - spinning dynamics of spandex is established, and its processing is studied by the way of analogue computation.
介绍了熔融纺丝的吹风冷却装置、吹风技术及熔纺冷却过程的计算机模拟研究的新进展。
The quenching equipment, quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced.
采用自制单孔熔融纺丝系统,对熔融纺丝状态时聚碳硅烷(PCS)的流变特性展开了研究。
The rheological property of polycarbosilane(PCS) spinning melt is studied with self-made single-orifice melt spinning system.
氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法,干纺产量占世界氨纶总产量的80%。
The spinning methods of Spandex are dry spinning, wet spinning, chemical reaction spinning and melt spinning. The output of dry spinning can reach 80%of Spandex total output in the world.
分析PCS纤维的特点以后,讨论PCS熔融纺丝时的纤维断裂机理以及PCS的可纺性影响因素。
After investigation of the characteristic of polycarbosilanes (PCS) fibers, the spinnability of PCS and its fibre rupture mechanism were investigated in the present paper.
介绍了聚乳酸纤维的纺丝方法、聚乳酸熔融纺丝工艺流程及目前国内外聚乳酸纤维的生产、开发情况。
It described the spinning method including solution-spinning and melt-spinning and process of melt-spinning of polylactide and companies manufacturing polylactide fiber in the world.
综述了聚丙烯腈纤维的熔融纺丝工艺,主要介绍了非增塑融纺的聚丙烯腈树脂及纤维的制备方法和性质。
We briefly describes the preparing and properties of the non - plasticate melt spinning PAN fibers as well as the resin that it made from.
氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法,干纺产量占世界氨纶总产量的80%。
The spinning methods of Spandex are dry spinning , wet spinning , chemical reaction spinning and melt spinning .
聚甲醛纤维是由高速附近的喷丝头的激光照射加热熔融纺丝获得的,同时变薄的行为进行了检查,在线测量。
Polyoxymethylene fibers were obtained by high-speed melt spinning with laser irradiation heating near the spinneret, meanwhile the thinning behavior was examined by on-line measurement.
对熔融纺丝-冷却拉伸与热致相分离两种制备微孔聚丙烯中空纤维膜的意义、原理、过程、影响因素等进行了评述。
Microporous polypropylene hollow fibrous membranes may be prepared by the melt spinning and cold stretching (MSCS) or thermally induced phase separation (TIPS) method.
本文借助于流变学理论,对在给定物料和纺丝工艺条件下的熔融纺丝喷丝板设计及确定合理的几何结构尺寸作了阐述。
The design of spinnerets and the determination of the reasonable size in geometry for the given feed polymer and spinning technology are illustrated with the aid of rheological theory.
选用熔融纺丝法制备PDLLA/HA复合纤维,探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
尼龙是采用熔纺工艺制成的,即将由熔化的尼龙切片构成的尼龙熔融体,强制通过喷头的纺丝孔。
Nylon is meltspun. That is to say a molten mass of nylon, formed by melting nylon chips, is forced through holes in a spinneret.
它利用纳米科技将竹炭颗粒微粉化后,熔融于涤纶载体纺丝而成,具有优异的消臭、蓄热、调湿等保健功能。
It USES nanotechnology to powder of bamboo charcoal particles, the melt spinning at the carrier made of polyester, has excellent deodorizing, thermal storage, humidity and other health functions.
采用聚丙烯切片、抗菌母粒共混,制成高熔融指数的抗菌高速纺专用料进行纺丝。
With PP chips and antibacterial matrices blent, the antibacterial special raw material with high melt index is prepared for speed spinning.
该抗菌抗紫外线复合功能健康纤维,使用复合功能健康纤维母粒,通过熔融高速挤压纺丝制得。
The antibacterial anti-ultraviolet compound function health fiber USES compound function health fiber master batches and is made through melting and extruding spinning in a high speed.
近年来,多种聚合物已成功被静电纺丝成极为细小的纤维,其中大部分是溶解在溶液中,也包括少部分为熔融状态。
Various polymers have been successfully electrospun into ultrafine fibers in recent years mostly in solvent solution and some in melt form.
近年来,多种聚合物已成功被静电纺丝成极为细小的纤维,其中大部分是溶解在溶液中,也包括少部分为熔融状态。
Various polymers have been successfully electrospun into ultrafine fibers in recent years mostly in solvent solution and some in melt form.
应用推荐