介绍了高炉紫铜螺旋风口的熔化极氩弧焊工艺。
The paper introduces the procedure for MIG welding of copper helical tuyere of blast furnace.
熔化极气体保护焊熔滴过渡检测具有重要的实际意义。
Detecting of metal transfer in GMAW has great practical significance.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
Gas metal arc welding (GMAW) is the main welding method in welding production.
窄间隙MIG焊(熔化极气体保护焊)是一种先进的高质量焊接方法。
Narrow gap MIG welding is an advanced welding technic with high quality.
介绍了采用熔化极脉冲氦弧焊工艺焊接大厚度铝合金燃料箱的优越性。
The priority of using melted pole pul se heliarc welding technique to weld the thick aluminum alloy fuel tank is introduced.
采用非熔化极惰性气体保护焊，并提高焊口绝缘等级，克服焊口的晶间腐蚀。
To deal with corrosion at weld joint, shielded inert gas are will be used and the insulation grade raised.
本文为熔化极CO2保护的IGBT逆变半自动弧焊机电源研制了一套控制系统。
In this thesis, a set of control system is developed for IGBT inverter power supply of consumable-electrode CO2 shielded arc-welding machine.
研究了ZL114 A合金大型铸件熔化极气体保护焊(MIG)焊补区域的组织与性能。
Microstructure and properties of repaired welding area in large aluminum alloy ZL114A castings by MIG (Metal Inertia Gas) welding technology were studied.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
关于钢焊丝熔化极气电焊时从颗粒状过渡突然转变为射流过渡的机构，至今存在分歧的观点。
There is disagreement on the mechanism of the abrupt transition from globular to streaming mode of metal transfer in steel wire MIG welding.
镀铝钢板焊接采用熔化极氢弧焊短路过渡方法，使其焊接接头的质量和耐蚀性都得到了提高。
The short circuit transfer of GMAW with argon shieding is used to weld aluminium-plated steel sheets or plates. In the way of this, both joint quality and corrosion resistance can be increased.
焊接方法为脉冲熔化极混合气体保护焊，焊接板的中心裂纹处于焊缝与热影响区之间的熔合区。
The welding method used was a PC-GMAW process with mixture gases shielding. Central crack for the welded plate was located in the fusion zone between welding seam and heat-affected zone.
介绍了对熔化极焊机全自动改进的方法、操作。此法有效地保证了H钢的焊接质量，提高了焊接速度。
The method and the operation of the fully and automatically improved fusion electrode welders were presented, the method could ensure the welding quality of H steel, and increase the welding velocity.
利用该方法对V形坡口进行了金属熔化极气体保护电弧焊的跟踪试验，试验结果验证了所用方法的有效性。
Tracking experiment of MIG on V shape welding groove is made with this method, and the experiment result validates the validity of this method.
熔化极气体保护焊熔滴过渡数值模拟作为焊接学科的前沿领域和研究的热点之一，近年来已经取得了较大的进展。
The technology of numerical simulation for metal transfer in GMAW is one of the front and research hotspot in the weld filed , which has achieved great progress in recent years.
本文利用高速摄影机和示波器研究了钢焊丝熔化极脉冲焊的各种熔滴过渡形式，试验是在平焊和仰焊位置进行的。
In this paper various metal transfer modes in the pulse MIG welding with steel electrode are studied by means of high speed cine camera and oscillograph.
全面系统地介绍了脉冲熔化极气体保护焊的各种控制方式，并明确地把它们分为两类：参数控制和熔滴过渡精确控制。
This article introduces all kind of control method of pulse melting pole in gas protection welding, and divided them into two kind: parameter control and melt dripping transition accurate control.
根据熔化极焊丝填充焊的特性，对钢桥焊接中普遍应用的药芯焊丝CO_2气体保护焊和埋弧自动焊进行了焊接试验。
According to the characteristics of arc welding with filler wire, experiments about the FCAW-CO_2 and SAW which is commonly used in steel bridge welding were carried out.
最后开发了一套基于DSP为核心的数字控制系统，完成了熔化极气体保护焊弧长控制系统的硬件电路设计和软件设计。
A digital control system based on DSP was developed and the hardware and software configurations of the GMAW control system were completed.
东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。
The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.
针对奥迪轿车消音器的材料、结构及接头形式，研制了适用于消音器焊接的熔化极气体保护自动焊设备，并对焊接工艺进行了研究。
In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.
具有优秀的MAG（熔化极活性气体保护焊）焊接方法经验，能够针对不同材料使用不同焊接方法，熟悉FANUC焊接系统更佳；
Good experience of MAG can use these different welding methods for different material , family with FANUC robot system is better ;
阐述了混合气体在熔化极气体保护焊中的应用现状，分析了保护气体成分的不同配比对熔化极气体保护焊的焊接工艺性能、焊接质量的影响。
This paper illustrates the applications of mixed gases in GMAW and analyzes the different proportion of shielding gas impacts on the welding technics performance and quality in GMAW.
将熔化极气体保护焊（GMAW）的热输入处理为三维移动串热源，建立了串热源模型，模拟了JG590低合金钢的GMAW焊接热过程。
The GMAW welding thermal process for low alloy steel JG590 was analyzed based on the established heat source model.
主要介绍了目前等离子—熔化极气体保护焊在采用不同的电极连接形式下，不同的电弧形态和熔滴过渡方式，以及电弧成分组成和温度分布；
This paper mainly introduces the different arc shapes, metal transfer modes, compositions of arc and temperature distribution in plasma-GMAW with different electrode connection forms at present;
采用熔化极惰性气体保护堆焊方式，在阀体密封面上均匀地熔敷镍基合金的耐磨焊层，从而达到改善阀体密封面的表面质量，显著延长阀体寿命的目的。
Using the MIG surfacing method, Ni-alloy was deposited evenly on the sealing face of valve to enhance the performance and prolong the life of the valve.
然后主要从双丝或多丝电弧焊工艺和双焊炬组合焊接工艺两个大的方面着重介绍了纵列式熔化极气体保护焊、等离子弧-熔化极气体保护焊和双电极熔化极气体保护焊等高速弧焊工艺。
Then, high-speed arc welding processes are introduced, such as tandem GMAW, PAW-GMAW and DE-GMAW, based on two categories:twin or more wires arc welding process and two-torch combined welding process.
然后主要从双丝或多丝电弧焊工艺和双焊炬组合焊接工艺两个大的方面着重介绍了纵列式熔化极气体保护焊、等离子弧-熔化极气体保护焊和双电极熔化极气体保护焊等高速弧焊工艺。
Then, high-speed arc welding processes are introduced, such as tandem GMAW, PAW-GMAW and DE-GMAW, based on two categories:twin or more wires arc welding process and two-torch combined welding process.
应用推荐