LN - 10半自动送丝机配有分开的焊丝导向装置,该装置能精确地排列焊丝,同时使焊丝顺利通过整个送丝系统。
The LN-10 semiautomatic wire feeder features the revolutionary split wire guide which precisely aligns and supports the wire through the entire feeding system.
全位置自动焊接技术的特点是,焊丝可以连续送进,焊丝熔敷速度快,焊接质量较高,尤其适用于大口径、厚壁管的焊接。
This welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.
焊丝从第二个驱动组件穿出去。
介绍了药芯焊丝自保护下向焊技术。
Introduced here is the advanced flux cored down weld technology.
钴基焊丝是一种用于起重机的原材料。
焊丝用完后已卷绕起来了。
其次,对活性焊丝的焊接效果进行了研究。
The welding effect of activating flux coated wire is studied in this paper.
焊丝在使用前应清除其表面的油污,锈蚀等。
目前年生产药芯焊丝能力达到10000吨。
研究了用于T91钢管打底焊的碱性渣系药芯焊丝。
Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
主要生产经营焊丝、化工原料、金属材料、色母染料。
Production and operation of the main wire, chemicals, metal materials, Color Masterbatch dye.
焊接电流通过孔径稍大于焊丝直径的接触端传送到焊丝。
Welding current is transferred to the wire through the contact tip whose bore is slightly greater than the wire diameter.
焊接材料为高韧性气保焊丝WER60及富氩保护气体。
The welding materials are high toughness welding wire WER60 and rich argon shielding gas.
与YS800焊丝配套的气体保护焊接头力学性能优异。
Excellent mechanical properties can be obtained by using YS800 welding wire as the filler metal.
本焊接技术由焊丝成分、焊丝直径和电流波形的组合构成。
This welding technology is constituted by the combination of welding wire composition, the diameter of a wire, and current waveform.
对所研制的焊丝匹配烧结焊剂进行了熔敷金属的埋弧焊试验。
Submerged arc welding with the test welding wire matching sintered flux was carried out to get the deposited metal.
分析了细径不锈钢药芯焊丝拉拔过程中产生扭曲变形的原因。
The reasons for deformation of thin diameter stainless steel FCW was analysed.
由于药芯的存在,管状药芯焊丝的拉拔不同于普通的钢管拉拔。
The drawing process of tubular flux-cored wire is different from common steel pipe because of flux core.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。
A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.
研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。
A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.
焊条及焊丝的化学成分及机械性能应同母材的等级相同或更高。
Welding electrodes and wires shall have chemical compositions and mechanical properties equal to or of higher grade than the base material.
本文研究了一种高硬度高韧性耐磨埋弧堆焊用金属粉型药芯焊丝。
A type of metal powder-cored wire with high hardness, wear-resistance and high toughness is studied in this paper.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
一般来讲,金属粉芯焊丝花费要高于常规焊材,尤其是实心焊丝。
On average, metal-cored wires cost more per pound than other filler metals, particularly solid wire.
CO2气保焊丝表面清洗质量的好坏直接关系到焊丝镀层的质量。
Surface cleaning quality of CO2 shielding welding wire good or not is directly relative to plating coat quality of welding wire.
根据药芯焊丝水下焊接的要求,研制了一套水下焊接电弧控制系统。
At the special request of the flux-cored wire welding underwater, the welding arc control system is developed.
研究了药芯焊丝在CO2保护电弧堆焊过程中合金元素的过渡系数。
The transition coefficients of alloying from cored wire to deposited metal during CO2 GMAW have been studied in this paper.
对ER70S - 6气保焊丝钢在拉拔过程中的断裂问题进行分析。
The fracture during ER70S-6 wire rod drawing of gas shield welding wire steel is analysed.
拨动手轮时,螺母连接板带动悬挂式埋弧焊接机头与焊丝盘支架轴向移动。
When a hand wheel is toggled, the nut connecting plate drives the hand piece of the suspended type submerged arc welding machine and a wire reel bracket to move axially.
拨动手轮时,螺母连接板带动悬挂式埋弧焊接机头与焊丝盘支架轴向移动。
When a hand wheel is toggled, the nut connecting plate drives the hand piece of the suspended type submerged arc welding machine and a wire reel bracket to move axially.
应用推荐