本文仅就其主要热压工艺参数的控制进行分析讨论。
This paper is specializing in the controls of main pressing technology data according to the above mentioned...
该机的研制成功,为人造板新型热压工艺的研究打下了基础。
With the successful development of the lab's press, research of new craft will get a strong basis for wood -based panels produced.
同时叙述了热压工艺:包括温度、压力,保温时间等工艺参数的选择。
The selection of technological parameters of hot-pressing including temperature, pressure and time are described.
连续平压法生产MDF与多层压机生产在热压工艺上有着明显的区别。
There are some obviously different points between medium density fiberboard(MDF) hot pressing technology by continuous press and multi opening press.
第三章介绍的是热压工艺中的一个重要工艺环节——硅阳模制作工艺。
In chapter 3, the process technology of silicon mold by means of photolithography and wet etching was introduced, which is a important process of hot embossing technology.
用煅烧石油焦和煤焦油为基本原料,采用热压工艺制备了几种石墨材料。
Several graphite samples were made from calcined coke and coal tar by hot pressing.
以煅后石油焦和煤沥青为基本原料,采用热压工艺制备了一系列石墨材料。
Bulk graphite was prepared from starting materials of calcined coke and coal tar pitch by the hot pressing process.
以煅烧石油焦为基本填料,煤沥青为粘结剂,采用热压工艺制备石墨制品。
The bulk graphite was prepared from starting materials of calcined coke and coal-tar pitch by the hot-pressing process.
结果表明合理确定热压各个阶段的压力、时间,是热压工艺中最关键的要素。
The result showed if the pressure and the time in every stage were correctlly determined that is the key factor in the hot pressing technology.
本文首先介绍了热压的工艺流程,随后尝试采用热压工艺完成具体器件的复制。
This thesis introduces the technology process of hot-pressed nanoimprint firstly, and then tries to reduplicate the specific device by nanoimprint technology.
简述了国产人造板热压机根据传统热压工艺而制定的传统控制技术及其存在的弊病。
In this article, the control system of traditional hot presses made in China and its dis advantage was described briefly.
N10276 复合板广泛地应用于工业生产中,对其热压工艺的研究就尤显重要。
The N10276 clad plate has been used in industry more and more widely, so it is very important to study its hot-forming.
研究表明:只有在合适的热压工艺和组分条件下才能获得良好的微观结构与力学性能。
Results show that better microstructures and mechanical properties can be achieved only under suitable hot pressing conditions and the material compositions.
研究了TiC含量、粘结相成分、以及反应热压工艺对致密化过程和力学性能的影响。
The effects of TiC content, composition of the binder phase and reactive hot pressing processes on densification process and mechanical properties were studied.
结果表明,改进后的系统能很好地满足现代热压工艺同时实现速度及位置控制的要求。
The results shows that the initial open-loop control can change velocity easily and PID adjustment can guarantee the po…
介绍中密度纤维板生产中,热压机液压系统各液压组件的作用及实现热压工艺曲线的过程。
Function of hydraulic parts comprising the hydraulic system of multi-opening hot press and realization of the hot pressing procedure in MDF production are introduced.
重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响,并探讨了热压含碳球团获得高强度的机理。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
质量好的木门要通过热压工艺成型,实木封边机机械封边,砂光机平整砂光,保证其平整度、牢固性、美观性。
Good quality hot press molding process through doors, solid wood edge banding machine edge, sanding smooth sanding machine to ensure its smoothness, firmness, appearance.
介绍了采用可生物降解热塑性PHBV 树脂为粘结基体相,天然纤维作增强相,通过热压工艺开发绿色板材。
This paper introduces the technology of biodegradation by using natural fiber as buildup cross - purposes and PHBV polyester as felt cross - purposes through the heat press process.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响,并探讨了热压含碳球团获得高强度的机理。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响,并探讨了热压含碳球团获得高强度的机理。
The effects of coal from different mines and hot briquetting process parameters on the cold strength of CCB were investigated, as well as the mechanism of acquiring high strength of CCB.
介绍在采用E_1级脲醛树脂胶的情况下,生产e_1级刨花板对设备、胶粘剂、刨花制备、热压工艺及检测的要求。
An account is given of the requirements for equipment, adhesive, particle preparation, hot-pressing technology and testing methods when producing Grade E_1 particleboard with E_1 UF resin.
首先,对MEA的制备及优化研究,主要从热压工艺参数、催化层组分优化、扩散层和质子交换膜的选择等方面考虑的。
First, Fabrication and optimization of MEA are studied in many aspects, for example hot press parameters, components of catalyst layer and diffusion layer, PEM thickness, etc.
采用SEM、X射线衍射分别对复合介质的微观结构及其相组成进行了观察与分析,并获得了制备低损耗复合介质的最佳热压工艺制度。
The microstructure is observed by means of SEM and phase composition analyzed by XRD. On the basis of the investigation, an optimum heat press system is established.
以改性三聚氰胺甲醛树脂(MF树脂)和酚醛树脂(PF树脂)为胶粘剂,设计了两组热压工艺参数,按照“冷-热-冷”工艺压制竹帘胶合板。
Taking modified MF and PF resin as the adhesive and using "cool-hot-cool" technology, this paper designs two groups of technological parameters of hot-pressing to press bamboo curtain plywood.
介绍了刨花板热压过程中板坯的物理变化和化学变化,分析了热压温度、时间、压力在热压过程中的作用,阐明了热压工艺是刨花板生产中产品质量保证的重要环节。
This paper introduces the physical and chemical change of particleboard in the course of hot pressing and analyses the effect of temperature, heating time and pressure.
结果表明,采用真空热压后热轧工艺制备的碳纳米管铜基复合材料的致密度较高且能有效地防止被氧化。
SEM and XRD results show that the composite that is hot rolled after vacuum forming, has relatively high density and can avoid being oxidized effectively.
结果表明:以刨花预压制坯再进行热压模压的两步法刨花模压工艺,制备具有立体结构的刨花模压装饰板材的技术路线是可行的。
The result showed that two-stage process was practical to pre-press particleboard mat then to hot-press in mold to produce tridimensional decorative particleboard .
超细石英粉经热压成型(HP)制成红外陶瓷材料,工艺简单,原料成本低。
Infrared ceramics material is prepared using HP ultrafine quartz powder in a simple process and at low cost.
本文叙述了绿碳化硅砂、铸石砂在选矿设备中的应用效果以及热压生产工艺。
This paper describes the application results of Carborundum and cast stone in mineral processing equipment as well as the hot pressing technology for producing them.
应用推荐