PLIF技术是研究火焰结构的有力工具。
PLIF technique provides a powerful tool for investigating flame structure.
氢氧基的P LIF图像是研究火焰结构和流场的有力工具。
OH PLIF technique provides a powerful implement for investigating flame construction and flow field.
TNAZ的含量变化对TNAZ -CMDB推进剂火焰结构的影响不明显。
The flame structures of TNAZ-CMDB propellants were little affected by the content of TNAZ.
通过微热电偶测温和火焰单幅照相技术测试了含硼富燃料推进剂燃烧波温度分布及燃烧火焰结构；
The combustion wave temperature profiles and flame structures of fuel-rich propellant containing boron are measured by using W-Re micro-thermal couple and flame photo technique.
用这种方法研究了不同凹腔长深比、凹腔后缘倾角和不同燃料喷注方案对超声速燃烧火焰结构的影响。
Then the influence on flame structure of supersonic combustion of ratio of length and deep of cavity, obliquity of back edge of cavity and different schemes of fuel injection were studied.
通过高速纹影图像从细观角度详细研究了不同传播条件下瓦斯爆炸火焰前锋的细微结构。
Using high speed schlieren photographs the microstructure of flame front surface in gas explosion was studied from the microscopic view.
运用OH-PLIF方法探测了不同燃料系数和出口湍流度下甲烷/空气的锥形预混火焰的火焰前锋结构。
The flame front structures of the methane/air premixed flames are observed by using OH- PLIF method in the different conditions of equivalence ratio and inlet turbulence intensity.
结果表明：精细的火焰多层膜层结构的透镜效应研究对获得极准确的激光全息信息非常有益。
The results show that the study on lens effect in fine flame stratified film structure is benefit for obtaining very accurate laser hologram information.
燃烧不稳定不仅影响航空发动机的工作稳定性，而且还是造成燃烧室火焰筒薄壁结构声振耦合疲劳破坏的重要原因。
Combustion instability not only affects the stability of the aero-engine work, but also caused the combustion chamber flame tube thin-walled structure acoustic-vibration coupled fatigue.
研究了超声速预混可燃气流的温度以及当量比对超声速燃烧流场结构、点火与火焰传播特性的影响。
The effects of temperature and equivalence ratio of supersonic premixed combustible flow on the structure of supersonic combustion flow field, ignition and flame propagation were studied.
针对焊接药剂的特点，并结合焊条的具体结构，采用专用火焰点火器点燃焊条的设计方案，并对点火器进行了详细设计。
Considering the characteristic of thermite and the concrete structure of the welding rod, the design scheme of special-purpose flame igniter is adopted, and the igniter is designed in detail.
简介W火焰锅炉适应于无烟煤燃烧的结构特点。
The structure of W flame boiler suitable for anthracite is introduced.
通过跨越河流、穿过火焰在思想中延伸的景象。刻画出一个神秘的内洞，穿越将公共空间与内省空间分离开的结构。
It carves a mysterious, internal cave through the structure that separates the public Spaces from the more introspective, with views across water, through fire and expanded in reflections.
文中简单介绍了火焰探测器的结构和成像特点。
In this paper, the structure of a flame detector and CCD imaging feature is described.
多数实用燃烧装置的火焰建立在具有射流剪切层结构的流场中。
Most of the flames in practical combustors are established in flow fields of the structure of the shear layer of jets.
弄清开缝钝体尾迹的拟序结构是认识其火焰稳定机理的基础。
To understand flame holding mechanism of a slotted bluff body based on the resolution of its coherent structure in the wake.
介绍我国现役各类W火焰锅炉燃烧器、配风方式及结构特点。
The features of burners, air distribution mode, and structure for various W-shaped flame boilers in service at present in China have been presented.
系统服务于火焰数控切管机切割海上平台导管架管件，系统输入为海洋平台的结构单线图，系统输出为导管架切割单件图。
The input of the system is the structural single line graph of the sea platform and the output is the single-piece graph of the jacket's cutting.
介绍了利用彩色面阵CCD进行火焰投影温度测量的系统结构和基本原理，并分析其主要的误差来源。
The make up and basic principles of a flame temperature measuring system using colored array CCD (charge coupled device) are described along with an analysis of its major error sources.
此外从结构设计上要有消除火源，防止火焰蔓延的措施；
There should also be measures to extinguish fire origins and prevent the spreading of flames.
介绍了红外火焰检测装置的原理结构及其火焰信号处理器的改进措施。
There also introduces the principle and structure of infrared flame detecting equipment and the improving measure for flame processor.
文章以DBC制造的300MW“W”形火焰锅炉为例，详细地介绍了锅筒、水冷壁、燃烧器和水冷壁集箱的典型结构和制造方法。
The paper gives a detailed introduction to the typical structure and manufacturing method of drum, waterwall, burner and waterwall header of the 300mw double arch furnace boiler produced by DBC.
数值计算结果表明，结构差异是燃料气和助燃空气的流场组织不同的原因，表现为不同的燃烧火焰形状及温度分布。
The numerical simulation results indicate that the flow of fuel and air varies with different structures, and as the result is the difference of flame shape and temperature distribution.
便携式空气加热器，燃气控制，重金属结构，耐用风机，在电源切断或火焰熄灭的情况处动切断。
Portable powerful instant gas air heater, enclosed gas controls, heavy-duty steel construction, equipped with high performance fan auto shut off if power is interrupted or flame is extinguished.
自动火焰表面处理装置用于改变容器表面之组织结构，确保印刷油墨牢固附着于印刷上。
Automatic flame surface treat device is used for changing the framework of container surface to ensure the printing-ink is firmly adhered on the printing.
介绍东方锅炉（集团）股份有限公司600MW机组“W”型火焰锅炉的技术特点、主要结构及设计性能。
The article describes the technical features, main construction and design performance of DG 600MW double-arch furnace boiler.
基于图像处理方法和分型理论研究了液化气扩散火焰边缘分形结构特征。
The fractal structure of LPG diffusion fire edge was theoretically studied on the basis of image processing and fractal theory.
它具有火焰不直接冲刷加热工件、升温速度快、加热温度均匀、节约燃料、结构新颖等特点。
It possesses the characteristics of fast speed heating up, homogeneous heating, fuel conservation and novel structure.
大型圆筒形焊接结构火焰自动气刨方法及专用设备。
The invention relates to a large cylindrical welding structure flame automatic air gouging method and a special device.
大型圆筒形焊接结构火焰自动气刨方法及专用设备。
The invention relates to a large cylindrical welding structure flame automatic air gouging method and a special device.
应用推荐