驱动设计的难点在于必须保持激振信号幅度在合适的范围内,过大过小都不能驱动一次仪表正常工作。
The difficulty lies on keeping the amplitude in a proper range to activate the primary instrument, neither too high nor too low.
该文阐明了简谐激振法的识别原理。
The identification principle of simple harmonic excitation method is illustrated.
探讨振动电机激振力的测试方法。
Investigates the method to measure exciting force of the vibratory motor.
本文介绍瞬态冲击激振的一般理论和试验方法。
In this paper, the common theory and testing method of impulse excitation are described.
激振电路是科里奥利质量流量计的重要组成部分。
The excitation circuit is one of the important parts of Coriolics mass flowmeters.
结晶器及其激振系统是连铸机中的重要组成部分。
The mold and its oscillation system are the important part of the caster.
新型电磁脉冲激振技术是一种非接触的瞬态激振。
The new technique of electromagnetic pulse vibration excitation is a kind of non-contact transient vibration excitation.
研究了简支梁在两个激振力作用下的组合谐波响应。
The combination resonance of a simple supported beam under two excitation forces was studied.
激振系统信号源的频率、幅度和波形应该能够任意调节。
The frequency, the amplitude and the waveform of the signal source should be controllable.
该计算模型今后还可应用于转子稳定性及汽流激振的分析研究。
This calculation model can henceforth also be used for analyzing rotor stability and flow incited vibration.
探讨了外界激振对扫描探针显微镜(SPM)扫描图像的影响。
The influence of external vibration on scanned images of scanning probe microscope (SPM) is discussed.
根据激振方式的不同,瑞雷面波勘探分为稳态法和瞬态法两种。
Rayleigh wave exploration is divided into steady state way and transient state way according to the differ of explode mode.
研究了火箭发动机高速旋转试验台高速轴在工作激振频率内的振型。
The mode shapes of the high-speed shaft in rotating test-bed for rocket engine within working excited frequencies were studied.
考虑汽流激振的超超临界汽轮机转子系统的稳定性分析是个较新的课题。
The stability analysis of rotor system of supercritical steam turbines including the steam-excited vibration is a comparatively new subject.
利用周期激振力法,对欧拉动弯曲问题中的混沌行为进行了有效的控制。
The chaotic behaviors in Eulers dynamically buckling system were controlled by means of the periodic force excitation.
螺旋桨在不均匀伴流中操作引起的激振是船舶设计一个非常重要的因素。
Propeller-induced vibration caused by propeller operation in unsteady wake flows remains a highly important factor in ship design.
试验数据显示:所采取的措施可降低船体结构的激振以及空气噪声水平。
Thetest data shows that these measures can lower the vibration of the hulls and the level of air-noise effectively.
为了保证远场信号的相位与激振力的相位一致,应当控制激振力的相位。
Output force phase should be controlled so as to get the far field signal inphase with the output force phase.
本文还进行了实验转炉的振动测试,验证了所推导的激振力公式的正确性。
Vibration tests carried out on the experimental converter have proved the validity of the vibration formula derived.
采用弹性支撑和改变压电陶瓷激振方式,实现了电机两相振动频率的简并。
Adopted elastic supporting and altered exciting manner, two phase vibration frequency degeneration of the motor is realized.
本文叙述了MQ 6025a型万能工具磨床的激振试验及对结果的分析。
This paper deals with the excitation test for Universal Tool Grinder Model MQ6025A and an analysis of the results.
泥浆振动筛处理量同其激振频率和振幅的关系是设计中必须妥善处理的问题。
The relation of screen capacity to the frequency and amplitude of vibration plays an important role in shale shaker design.
如何假定水线与拉索表面之间的作用力是建立风雨激振理论模型的难点之一。
The action between rivulet and cable surface is one of the difficulties in establishing theoretical models of rain-wind induced vibration.
本文介绍了液压振动台的计算机控制,其控制形式为恒功率和恒激振力控制。
This paper introduces a computer control for hydraulic vibrating table, with adopting constant power and constant exciting force control.
计算表明:隔振模块的隔振性能与其长度、阻尼、所受到的拉力和激振力有关。
Calculations show that isolation capability of VIM is affected by the module length, damping, tension and exciting force frequency.
在此基础上确定了液压激振系统工作参数与振动摆动辗压工艺参数之间的关系。
On these bases, a relationship between the vibration system and rotary forging technical parameters is defined.
随着旋转机械结构参数的提高,作用在转子上的密封中的气流激振力将显著增大。
With the structural parameters of the rotary machine increased, the seal airflow induced force imposed on the rotor will significantly increase.
采用机械阻抗原理,给出了轮轨系统随机激振力功率谱密度函数的理论计算方法。
A theoretical method of the PSD of random excitation force in Wheec-rail system is advanced on the principle of mechanical impedance.
实验研究及金相分析结果表明,高频激振时效技术是一种有效的振动时效新方法。
The experimental and metallographic results show that high frequency VSR is an efficient technology of VSR.
实验研究及金相分析结果表明,高频激振时效技术是一种有效的振动时效新方法。
The experimental and metallographic results show that high frequency VSR is an efficient technology of VSR.
应用推荐